Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
On the involved vehicles, the hose used to supply vacuum to the brake power unit or vacuum reserve tank may have been of the wrong material. This hose could deform sufficiently during normal operation to cause a reduction in vacuum assist…
The involved vehicles may have been equipped with defective hubs in that they may develop cracks which could lead to hub failure.
The involved vehicles do not conform to federal motor vehicle safety standard no. 217, "bus window retention and release". Emergency exit labels may have been omitted near the rear exits on some vehicles. Also, labels at the optional side…
The involved fifth wheel couplers may contain defective clevis pins which could develop stress cracks in the area of the 1/4 inch diameter hole where the cotter pin IS installed. This condition could cause the clevis pin to shear in half.
On the involved vehicles, the securing nut which fastens the pendulum lever to the steering box rocking shaft may not have been tightly fastened. Should the nut work loose and come off, the pendulum lever may be detached from the rocking…
The furnace on the involved vehicles may have been improperly installed. Consequently, when the furnace IS in service, a down draft or suction may be created within the refrigerator cabinet. Furthermore, this down draft could cause the…
The involved tires failed to meet the requirements of federal motor vehicle safety standard no. 109, "new pneumatic tires". This failure IS believed to be due to excessive moisture content in the fabric bead wrap which causes separation…
The "spoker wheels", installed on the involved vehicles, may fail in service due to cracks that may develop in use. Continued driving with a cracked wheel could lead to failure of other spokes and the complete collapse of the wheel.
On the involved vehicles, the word "fuel" IS missing from the label for the fuel tank shut-off valve. This constitutes a non-compliance to federal motor vehicle safety standard no. 123, "motorcycle controls and displays". Due to this…
Cracks may be present in the brake spider. These cracks could eventually cause the brake spider to fail. This could allow separation of that portion of the brake spider that retains the brake camshaft, the brake chamber, and the brake…
On the involved vehicles, the cotter pin may have been omitted and the retaining nut improperly secured. Consequently, the steering linkage could detach from the pitman arm.
The lower steering shaft yoke clamp bolts on the involved vehicles may not have been sufficiently tightened. Should these bolts lossen and come off, the lower steering shaft could separate from the steering gear.
The rear hanger brackets on the involved vehicles may develop cracks. These cracks could progress and cause brackets to fail completely. Because the brackets are located on the underside of the axle housings, failure of the brackets could…