Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
Fuel return hoses may break at either crimped coupling.
If the wiring of cruise control system becomes wet while engaged, there IS a possibility of creating a short circuit and cruise control malfunction.
Owners manuals did not fully explain how front shoulder belt comfort feature works.
The emergency exit window release mechanism may require manual release force that exceeds the maximum allowable force of 20 lbs.
The defroster lever pin of the defroster shutter door may become dislocated and allow the shutter to close, preventing defroster from functioning.
Mis-wired power selector switch mounted in motorhome wall could cause power cord to become energized by the generator while the cord IS still stowed.
Loose pivot bolt holding the brake pedal to its support bracket could disengage from the nut.
Use of improper primer on metal surfaces of windshield and side window openings could cause low adhesion to the metal surface and would not provide retention required by fmvss 212.
Diluted primer may have been used on the windshield opening flanges prior to windshield glass installation which would not provide the retention required by fmvss 212.
Diluted primer may have been used on the windshield opening flanges prior to windshield glass installation which would not provide the retention required by fmvss 212.
Improper drilling of hole tapers in the steering arm and pitman arm may cause inadequate seating of the drag link ball stud on either the pitman arm or the steering arm and tie rod end on the steering attachments.
Wireform that secures rubber grommets, which serve as a routing guide for the positive battery cable, may not meet specifications.
Under certain conditions, the snap ring that locates the park gear on the output shaft of the transmission may fracture.
Incorrect size master cylinder installed will provide less line pressure to wheel cylinders for a given pedal pressure.
Lock pins in steering wheel and hub assembly my shear off, allowing steering wheel to spin.
If sunroof glass IS removed and reinstalled by vehicle operator, hinge assemblies can be accidentally improperly mated.
Interconnection of return line plumbing from hydroboost steering gear may cause light application of hydroboost unit without applying brake pedal.
Plastic fuel filter assemblies may develop leaks.
At high engine speeds, the cooling fan adapter plate, which connects the cooling fan and the fan pulley, has insufficient strength, allowing cracks to develop in the adapter plate.
Plastic components of seat belt buckle assemblies do not contain an ultra violet stabilizer, and exposure to direct sunlight and elevated interior temperatures could weaken the plastic components.
Safety belts may not extend easily from their retractors when vehicle IS parked on slight slope as required by fmvss 208. Rear stop lights and turn signals do not meet minimum photometric strength, and front turn indicator - side marker…
Tire pressure placard required by fmvss 110 may be incorrect or missing.
Vehicle description: limousines built by empire coach. vehicle alterers label may be missing or incomplete.
Vehicle description: limousines built by empire coach. safety belts may not have been installed for rear facing seats.
Safety belts were not provided for every seating position on the rear facing seats.
Alterer's label containing gross vehicle weight rating information may be absent or incomplete.
Revised tire information label needed.
All designated seating positions do not contain seat belts as required by fmvss 208.
Side and rear windows are tinted.
Continuous exposure to road salt could cause corrosion of rear suspension components, especially the inner arms.