Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
Vehicle description: school buses equipped with outward opening service doors. the possibility exists for an item worn by a child, such as a long drawstring, sash, or backpack/bookbag accessory, can become caught in a small opening at…
If the front wheels are turned to full lock, the wheel could contact the brake hose and damage the hose.
Vehicle description: police and taxi vehicles. the hood latch striker can wear or become detached from the hood.
The transmission shift control lever can break off at the transmission.
Contact between the brake chamber and the suspension beam can result in damage to the brake chamber clamp band.
The windshield wiper motor circuit breaker electrical contacts were contaminated during assembly.
Vehicle description: vehicles equipped with 3.8L engines and originally sold or currently registered in the following states: alaska, colorado, iowa, idaho, illinois, indiana, kansas, massachusetts, maine, michigan, minnesota, missouri…
These vehicles are originally sold or currently registered in the following states: alaska, iowa, minnesota, nebraska, north dakota, and south dakota. the vehicles involved are 1992-1994 tempo/topaz vehicles with 3.0L engines; 1994…
Warning labels identifying the climbing sequence and process were omitted.
The front brake line hose can kink during front brake action.
When the vehicle IS being driven, the force of the wind against the hood can force the hood behind the bumper allowing the hood to drop. this reduces the tension on the two rubber hold-downs which then become loose.
Vehicle description: these vehicles were built for the u. S. Postal service. the control switch for the back-up lights were omitted during assembly.
These buses with gross vehicle weight ratings (gvwr) of 36,200, do not meet the brake size and power requirements of federal motor vehicle safety standard (fmvss) no. 121, "air brake systems," for vehicles of that gvwr.
The "o" rings of the regulator assembly in the onan emerald and marquis brand generator sets can weaken and break when exposed to high ambient temperatures.
The nut that secures the vehicle's main power supply can loosen causing loss of contact.
Some of these vehicles have a strained or separated washer/wiper switch power feed wire.
During the installation of the camper equipment, an improperly adjusted power tool drill bit punctured the fuel tank vapor container.
The electrical contacts in the power mirror switch can accumulate road salt due to water entering into the switch.
Vehicle description: buses equipped with isringhausen seats in the driver position. two welds located on the back rest adjustment side of the seat frame did not meet the manufacturer's specifications.
Certain clothing articles such as draw strings can become lodged in the forward handrails at the bus doors when a person IS exiting the bus.
The electric motor which drives the anti-lock brake system (ABS) hydraulic pump does not function after a period of operation.
The spare tire carrier hoist components can become loose while traveling and allow the spare tire to move from its stored position to the road surface.
The transmission range selector pad will indicate a drive range when the transmission IS actually in neutral.
These fire trucks do not at least two sources of return energy as required by federal motor vehicle safety standard no. 124, "accelerator control systems."
The top coat paint severely peels due to overbaking of the powder primer prior to the top coat application. since the windshield primer and adhesive adhere to the top coat paint onthe windshield opening flange, the windshield does not…
Corrosion can occur in the foot brake valve adapter bore and plunger due to water and road salt intrusion.
The top coat paint severely peels due to overbaking of the powder primer prior to the top coat application. since the windshield primer and adhesive adhere to the top coat paint onthe windshield opening flange, the windshield does not…
Due to undersized rivets and oversized holes, the b-pillar anchorage will not meet the requirements of federal motor vehicle safety standard (fmvss) no. 210, "seat belt assembly anchorages."
These motorcycles were produced with incorrect certification labels. incorrect tire rim data IS printed on these labels. a tire size of 120/70 ZR mt 3.5x17 rim at 32.7 psi cold, and 170/c0 ZR mt 5.50x17 rim at 36.9 psi cold. the proper…
Pressure on the battery ground lead (the crimped and soldered termination of the battery cable) from the base of the operator's seat can cause the battery terminal to short out inside the battery.