Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
Vehicle description: MINI vans. these vehicles were produced with power windows that can be closed after the ignition key IS turned to the "off" position and the right front (passenger) door IS opened. this does not meet the…
Vehicle description: passenger vehicles. the rear seat belt anchor does not achieve the loading required by fmvss no. 210, "seat belt assembly anchorages."
Vehicle description: light duty passenger vans and stripped chassis. there IS interference between the parking brake cable and the fuel line which, over time, can result in damage to the fuel line causing fuel leakage.
Vehicle description: dual rear wheel school buses built on ford E-350 cutaway chassis. the wrong front and rear axle weight ratings are listed on the certification label.
Vehicle description: multi-purpose passenger vehicles equipped with 4.0L single overhead cam engines. the engine fuel lines can be damaged if the vehicle IS jump started and the ground cable IS attached to the fuel line bracket that IS…
Vehicle description: passsenger vehicles. some of these vehicles have a poorly manufactured vacuum check valve located in the vacuum hose between the intake manifold and brake vacuum booster.
Vehicle description: passenger vehicles. the fuel injection line can wear due to interference with the water hose clamp on the coolant pipe.
Vehicle description: passenger vehicles fitted with single fuel pumps. the fuel injection line fitting can fracture if the aluminum nut attaching the lines IS tightened excessively.
Vehicle description: supercab pickup trucks. the positive battery cable IS taped to the negative cable which contains a clip to secure the assembly to the side frame rail. if incorrectly positioned, the positive battery cable can…
Vehicle description: school and transit buses equipped with non-electronic cummins B5.9L engines. the sliding action of the accelerator linkage lever over the hand throttle cable can cause the hand throttle wire to wear a notch in the…
Vehicle description: multi-purpose passenger vehicle. the front seat belt shoulder turning loop anchors were not properly heat treated and are not properly hardened.
Vehicle description: multi-purpose passenger vehicle. some of the frame welds that affect vehicle control and crashworthiness were omitted in six zones in the frame.
Vehicle description: supercab pickup trucks with dual rear wheel, and wide frame. the jacks provided with these vehicles are too large to be stowed securely under the seat as intended and were placed loose on the floor in the rear of…
Vehicle description: multi-purpose passenger vehicle. the driver's side air bag 'clock spring' wiring harness can break when turned to the 'full lock' turn position.
Vehicle description: multi-purpose passenger vehicle equipped with 4-wheel drive or all-wheel-drive. one or both of the attaching nuts for the right-hand lower control arm are under torqued. this can allow the attachment bolt to loosen…
Vehicle description: passenger vehicle. some passenger air bag module assemblies are missing some required components.
Vehicle description: motor coaches. the six mounting bolts that pass through the torque plate and hold the caliper carrier, are loose, under torqued, or missing.
Vehicle description: truck-tractors equipped with 26" 8-blade metal engine cooling fans. the fan blades can fatigue crack and eventually separate from the fan.
Vehicle description: fire apparatus vehicles. the front brakes fail to comply with the brake release timing requirements of fmvss no. 121, "air brake systems."
Vehicle description: fire apparatus cabs equipped with center mounted rear seats. the upper d-ring seat belt anchorages for the rear seats fail to comply to the requirements of fmvss no. 210, "seat belt assembly anchorages."
Vehicle description: passenger vehicles. the dash panel pad can shift interferring with the throttle cable control.
Vehicle description: passenger vehicles. the dash panel pad can shift interferring with the throttle cable control.
Vehicle description: travel trailers. a spacer tube on the frame was omitted. This spacer tube allows adequate clearance between the tire and wheel well.
Vehicle description: MINI vans. these vehicles were produced with power windows that can be closed after the ignition key IS turned to the "off" position and the right front (passenger) door IS opened. this does not meet the…
Vehicle description: school and transit buses. the parking brake indicator light can illuminate without the parking brake being set.
Vehicle description: dump trailers. a hollow draw bar pin was used instead of a solid draw bar pin.
Vehicle description: passenger vehicles. these vehicles were built with mis-located welds at the joint between the left rocker panel inner reinforcement and the body side ring. this does not meet the requirements of fmvss no. 214, "side…
Vehicle description: passenger vehicles. the automatic window retractor system, which allows the vehicle door(s) to open, will remain in the closed position.
Vehicle description: multi-purpose passenger vehicles equipped with factory installed sunroof. the sunroof glass panel assembly can separate while the vehicle IS moving due to incorrect hinge engagement. this was caused by improper…
Vehicle description: medium duty trucks and chassis-cabs. an automatic locking front wheel bearing adjusting nut was damaged during installation or removal by incorrect tools or an incorrect torque specification was used.