Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
Vehicle description: fire trucks equipped with 16,000 lb., 18,000 lb., or 20,000 lb. Heavy duty steering axles. the inner wheel bearing cone for the steering axle wheel hub assembly does not properly fit onto the steering axle spindle…
Tire description: s380a 295/75r22.5 lr g tires manufactured during the 48TH week of 1998 (december 1998) through the 8TH week of 1999 (february 1999); serial nos. A3371e5488 through a3371e5089. these tires have been overcured.
Vehicle description: medium duty trucks equipped with hydromax hydraulic brake systems. the park brake warning lamp circuitry does not include a provision for a park brake warning lamp check function. therefore, these vehicles do not…
Vehicle description: transit buses equipped with spicer 6,000 or 8,000 lb. Front steer axles. the tie rod end can pull outboard and separate from the tie rod tube due to improper thread engagement between the male tie rod end and the…
Vehicle description: transit and school buses built with ABS air brake ecu and a 100 gallon fuel tank mounted between the rails and behind the rear axle on models with a 276" wheel base. the ABS ecu interfered with the cross member…
Vehicle description: heavy duty trucks built with rear leaf spring suspensions (models 4700 built with rear leaf suspensions and manufactured from december 9, through december 16, 1998; models 3400 and 3800 built with 14sbk rear leaf…
Vehicle description: heavy duty trucks equiped with bosch 9" x 3" parking brake, spring actuated, for hydraulic less air source and actuated by parking brake knob in instrument panel. the parking brake hose chafes at various points…
Vehicle description: super duty trucks and chassis-cabs equipped with 5.4L manual transmission powertrains. the accelerator cable core wire can wear the cable conduit end fitting due to a fifteen degree angle it makes with the conduit at…
Vehicle description: heavy duty trucks built with code 16xwd (sunshade option code). some wires in the sunshade wire harness had insulation that did not meet temperature specifications. some harnesses have been found to have enough…
Vehicle description: 6-7 car trailers. the right and left front corner lights and rear lights are too low.
These vehicles have dual axle steering with a hydraulic valve which diverts power assist from one side to the other as necessary. the hydraulic valve can be contaminated causing the valve to malfunction.
Vehicle description: heavy duty trucks. the throttle cable can bind due to misalignment with the fuel pump assembly.
Vehicle description: passenger vehicles. the seat belt retractor may have a pin shaft in the switchable elr/alr mechanism that IS incorrectly formed. in some circumstances, the switching mechanism could become nonfunctional, preventing…
Equipment description: 6" deluxe fan for use in automotive vehicle interiors can overheat.
Vehicle description: motorcycles. the rear belt drive pulley on these motorcycles may be defective. the pulley could separate.
Vehicle description: school buses. some heater/defroster units were built with the blower motor wired improperly. when wired improperly the blower motor runs backward and airflow for heating and defrosting IS very limited. this does…
Vehicle description: school buses equipped with anchor seats. some of the seats were built with a seat mounting bolt that failed during testing. this does not meet the requirements of fmvss no. 210, "seat belt assembly anchorages."
Vehicle description: passenger vehicles. some of these vehicles do not comply with the head injury criterion requirements of fmvss no. 201, "occupant protection in interior impact." the upper retainer clip near the BP1 impact location…
Vehicle description: sedan l model passenger vehicles. anti-rust coating was incorrectly applied to the transverse link mounting surface of the vehicle body. over time the coating shrinks, causing a torque decrease of the bolt that…
Equipment description: child restraint systems. these seats were originally manufactured for export to canada and are not labeled correctly for sale in the united states. these seats do not comply with the air bag warning label…
Vehicle description: passenger vehicles. the brake system on these vehicles does not comply with fmvss no. 105, "hydraulic brake systems."
Vehicle description: passenger vehicles. the right rear brake tube can contact the exhaust system clamp and wear a hole in it.
The 5TH wheel trailer frame rails are fabricated from I beams. the web of these beams can crack above the axle attachments.
Equipment description: automotive starting, lighting and ignition batteries sold to sears, roebuck and company under the diehard trademark. cracking occurs in the internal portion of the positive or negative post on the outside top…
Vehicle description: passenger vehicles. the tie rods of the steering assembly are protected on each side by a seal to prevent moisture and dust particles from entering the swivel bearing mechanism. it IS possible that some tie rod…
Vehicle description: passenger vehicles. the fuel filler pipe vent hose may have less than the intended level of ozone resistance, which could result in the hose becoming brittle and cracking.
Vehicle description: passsenger vehicles. failures of the "easy entry" cable in the front driver or passenger manual seats can cause the seat fore/aft adjustable mechanism to be unlocked.
Vehicle description: motor homes built on a ford chassis. the brake system warning indicator lamp IS not in the correct position in the instrument cluster. This does not meet the requirements of fmvss no. 105, "hydraulic brake systems."
Vehicle description: passenger vehicles. the air bag sensor wiring pigtail insulation can become brittle and crack over time due to accumulation of water in the pigtail protective convolute in combination with high underhood temperatures…
Vehicle description: transit buses. failure of a soft seat check valve in wheelchair lifts provided by lift-u, may allow the front and rear platform barriers to return to a horizontal position from the vertical position they are supposed…