Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
On certain passenger vehicles, some welds between the passenger's side motor rail and the front bumper bracket do not meet engineering specifications.
On certain traveltrailers equipped with suburban furnaces, the furnace exhaust vent may not be present.
On certain motor homes, glass shower doors are cut and/or treated so that over time could develop sharp edges.
On certain ambulances equipped with goodrich velvet-ride rear suspension systems, the bolts connecting the suspension spring to the rear axle may break.
Certain passenger vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 118, "power-operated window, partition, and roof panel systems." the power windows and/or sunroof may be operable after the…
Certain passenger vehicles equipped with 2.2L 4-cylinder (L61) engines were built with a fuel filter that could corrode prematurely on the exterior surface.
Certain vehicles fail to comply with the requirements of federal motor vehicle safety standard no, 208, "occupant crash protection." certain air bag warning labels are required on both sun visors and the above vehicles failed to have the…
Hid headlight conversion kits. These lighting sources do not conform the electrical specifications that are required by federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
Certain commercial buses equipped with t-slide oval windows fail to comply with the requirements of federal motor vehicle safety standard no. 217, "bus emergency exits and window retention and release." incorrect side emergency exit…
Certain fe model school buses manufactured from october 14, 1991, and march 4, 2003. a gap between the modesty panel and the wheel well located behind the driver's seat can be created if the panel IS bent out of position. under the…
Husky child restraints model e9l30 manufactured from october 7, 2002 to december 8, 2003. these seats fail to conform to federal motor vehicle safety standard no. 213, "child restraint systems." restraints when installed with a lap belt…
On certain dual steer trucks, the 18" steering wheels were not assembled correctly. the horns either worked intermittently or not at all.
On certain motor coaches equipped with emergency exit windows fail to comply with federal motor vehicle safety standard no. 205, "glazing materials." the emergency exit window was not marked correctly with the "dot" markings.
Aftermarket power brake boosters, p/n 54-74421. due to a tooling setup problem, crimps on the outer shell of the boosters were positioned incorrectly. as a result, these units could fail during operation.
On certain passenger vehicles, some seat belt buckles may have a burr on a metal component of the locking mechanism. the presence of the burr could prevent the seat belt from locking under certain circumstances.
Certain sport utility vehicles equipped with 3.5L V6 (L66) engines fail to conform to the requirements of federal motor vehicle safety standard no. 120, "tire selection and rims for vehicles other than passenger cars." the front and rear…
Hidplus, hidplus II, and raybrig ss5000 headlight conversion kits. These lighting sources do not conform the electrical specifications that are required by federal motor vehicle safety standard no. 108, "lamps, reflective devices, and…
On certain motorcycles assembled with an early version rolling thunder frame, a stress crack could emerge in the frame.
Certain sport utility vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 120, "tire selection and rims for motor vehicles other than passenger cars."
On certain passenger vehicles, the fuel sender unit (fsu) may have been improperly installed in the fuel tank, producing an inadequate seal, and fuel may leak.
Hid headlight conversion kits sold in the USA from november 26, 2001, to december 12, 2003. These lighting sources do not conform the electrical specifications that are required by federal motor vehicle safety standard no. 108, "lamps…
On certain fire apparatus equipped with kenworth chassis, caterpillar C7 or 3126e and 2002 engines, and horton fan hubs. the fan hub mounting bolts can fail resulting in the hub and fan assembly separating from the engine. the loss of…
On certain sport utility vehicles, a post within the safety belt buckle covers could fracture, which could affect latch function, resulting in either a "no latch" or "partial latch" condition. in the "partial latch" condition, the buckle…
Warning triangle kits produced by globetech p/n gt-8500, manufactured between march 1 and july 31, 2003. these triangles do not comply with federal motor vehicle safety standard no. 125, "warning devices."
On certain dump trailers equipped with fifth wheel plates, cracks are visible in the plate located around the hoist mounts and king pin.
On certain travel trailers and fifth wheels equipped with ez-flo ground fault circuit interrupter (gfci) receptacles, the receptacle may not trip when a ground fault IS present.
Certain multi-passenger handicap-accessible vans built on ford E250 and E350 chassis fail to conform to the requirements of federal motor vehicle safety standard no. 225, "child restraint anchorage systems." these vehicles lack the…
On certain passenger vehicles, the fuel lines can disconnect and cause leakage in the engine compartment.
On certain sport utility vehicles, an instrument cluster circuit board capacitor may overheat.
Certain 36', 38', and 40' motor homes fail to comply with requirements of part 567, "certification." the rear psi states 85 or 115 lbs. the correct rear psi IS 95 lbs.