Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
Certain passenger vehicles not equipped with optional roof-mounted side impact air bags fail to comply with the requirements of federal motor vehicle safety standard no. 201, 'occupant protection in interior impact.'
On certain transit buses equipped with lift-u wheelchair lifts, it IS possible for a person to wedge their feet under the solid bar barrier linkage.
Some sport utility vehicles may have fuel tanks that contain an internal breather pipe that was not made to specification. this could result in excessive swelling and cracking of a grommet and subsequent detachment of the breather pipe…
On certain trailers, during manufacture, some of the pipe fittings were drilled too deep, resulting in a thin wall in the male pipe thread. the male pipe thread may break off during or after assembly.
On certain class a motor h0mes built with gasoline engines, the frame extension lower flange may crack allowing the hitch to bend and possibly separate from the motor home.
On certain trucks, the vacuum hose may have been manufactured with insufficient wall thickness allowing the hose to collapse during normal vehicle operation. collapse of the vacuum hose could reduce brake booster effectiveness.
Certain trucks are equipped with a pair of electronically controlled fans with a saleen-designed wiring harness. excessive current can run through the control box.
On certain heavy duty class 8 xpeditor trucks, some of the seat base mounting fasteners that secure the seat base to the cab floor bracket may have been left loose or not installed at all. improperly torqued seat-mounting fasteners may…
Certain fifth wheel travel trailers fail to comply with the requirements of part 567, 'certification.' the gross vehicle weight rating (gvwr) IS incorrect.
On certain motor homes, the distance from the rear cap to the hitch receiver encourages the use of longer ball mounts and/or extensions. the longer the ball mount and/or extensions used, the greater the forces that are applied to the…
Certain thomas built 2006 and 2007 C2 school buses manufactured between december 21, 2005, and september 4, 2006. the inlet air fitting welded to the base plate was manufactured inconsistently, possibly allowing the fitting to separate.…
On certain motor homes, the steering box mounting bolts may not have been properly tightened during production process.
On certain ninja motorcycles, the fuel tank may have been punctured or weakened by a fairing mounting screw or manufacturing operation.
On certain vehicles, the seat position sensor (sps) detects the driver's seating position and adjusts the air bag inflation pressure accordingly. the wiring harness for the sps was attached to the seat frame in the wrong location and may…
On certain walk-in delivery vans equipped wityh draw-tite modulite HD (p/n 18190) trailer light modules, the split tail light circuits are combined.
Certain thomas built 2006 and 2007 C2 school buses manufactured between december 21, 2005, and september 4, 2006. the stop arm may not deploy.
On certain vehicles, the accelerator pedal might not have been fully fastened to its mounting studs.
On certain vehicles equipped with automatic temperature control (atc) only, the software programmed into the heating ventilation and air conditioning (hvac) module may cause the windshield defrosting and defogging functions to become…
On certain vehicles, the antilock brake system (ABS) control module software may cause the rear brakes to lock up during certain braking conditions.
On certain buses equipped with a graham white brake air dryer model qba15, the brake air dryer timer does not function properly. the air entering into the brake system may not have the moisture removed. if not properly drained, small ice…
On certain recreational trailers, a furnace vent was not installed. the lack of an exhaust vent allows furnace combustion products containing carbon monoxide fumes to vent into the trailer.
On some peterbilt trucks, certain parts used in the air suspensions have a high copper content causing premature failure.
On certain trucks, the a-pillar mounted entry/egress grab handle may loosen and possibly separate from the vehicle.
On certain vehicles equipped with curtain side air bags (csa), the csa tether strap located in the front pillars may have been incorrectly routed during the assembly process.
The led stop, tail, turn, and side marker lamp combination package on certain tow trailers fail to comply with the requirements of federal motor vehicle safety standard no. 108, 'lamps, reflective devices, and associated equipment.' the…
On certain motorcycles, the tire inflation valve hole in the rim of the cross-spoke wheel which IS equipped with the optional tire pressure monitoring system (tpm) was incorrectly manufactured. a leak may develop at this location possibly…
On certain fifth wheel travel trailers equipped with great plains (gpi) fuel pumps, due to insufficient epoxy adhesive applied at the time of installation at the factory, a fuel leak can occur at the pump's inlet valve.
Certain ic school and commercial buses manufactured between october 11, 2005, and october 31, 2006. these buses have the following safety issues: if the driver's seat IS in the highest and most rear position, the back of the seat may…
On certain trucks, the brake vacuum hose may have been manufactured with insufficient wall thickness, allowing the hose to collapse during normal vehicle operation.
On certain motor coaches, the boost connector housing can fail over time, exposing the positive and negative terminals.