2022 Ford Mustang Shelby GT500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Mustang Shelby GT500 › 2022
These records cover every 2022 Ford Mustang Shelby GT500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10246071Certain 2022 Model Year Mustang GT 500 and 2023 F-150 Raptor R Vehicles - Engine Front Cover and Valve Cover Replacement
- 10243416Certain 2022 Model Year Mustang GT 500 and 2023 F-150 Raptor R Vehicles - Engine Valve Covers Replacement
- 10243413Certain 2023 Model Year 5.2L F-150 Raptor R and Mustang GT500 Vehicles - Left and Right Cylinder Heads Rear Cup Plugs Inspect and Seal
- 10243412Certain 2022 Model Year Mustang GT 500 and 2023 F-150 Raptor R Vehicles - Engine Front Cover and Valve Cover Replacement
- 10240743The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
- 10234126Some 2022 Mustang Shelby GT500 vehicles built on 27-Sep-2022 and through 04-Nov-2022, and 2023 F-150 Raptor R vehicles built on 21-Sep-2022 and through 13-Feb-2023, may exhibit an engine oil leak from the front of the engine. This may be due to a crankshaft front oil seal leaking due to an out of specification engine front cover seal bore. To correct the condition, replace the engine front cover. Workshop Manual (WSM) procedures for engine front cover replacement have been updated. Refer to WSM, Section 303-01F. For claiming, use causal part 6019 and M-time.
- 10233710Some 2022 Mustang Shelby GT500 and 2023 F-150 Raptor R vehicles built on 1-Aug-2022 and through 20-Feb-2023 may exhibit an engine oil leak from the front of the engine. This may be due to a crankshaft front oil seal that is out of position and leaking. To correct the condition, replace the crankshaft front oil seal. Workshop Manual (WSM) procedures for crankshaft front oil seal replacement have been updated. Refer to WSM, Section 303-01F. For claiming, use causal part 6019 and M-time.
- 10230771Some 2022 Mustang Shelby GT500 vehicles built on or after 22-Jul-2022 may experience a rough idle with no associated diagnostic trouble code (DTC). This may be due to an incorrect generator current sensor. To correct the condition, follow the Service Procedure to inspect and replace the generator current sensor.