2014 Grand Design Reflection 337RLS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Grand Design › Reflection 337RLS › 2014
These records cover every 2014 Grand Design Reflection 337RLS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
5 complaints
What owners report most
Latest complaints
- Service brakes
Bearing greese IS migrating through inner grease seal and contaimenating brake shoes and drum surface resulting in a loss of braking effectiveness. upon inspection all four wheel had contaimenated brakes.
- Service brakes · Unknown or other · Wheels
Grease seals for wheel bearings on 3 out of 4 wheels failed at under 2000 miles. Grease leaked onto brake mechanisms, making them spongy. 1 out of 4 brake assemblies totally failed. Grease seals and wheel assemblies are manufactured by lippert.
- Service brakes · Wheels
We purchased a new grand design reflection 5TH wheel in april of 2014. We have had considerable problems with it, but never expected to find that the brakes, grease seals, and wheel bearings were in installed correctly. I became aware that there were many reports of problems with the grease seals…
We purchased a new grand design reflection 5TH wheel in april of 2014. We have had considerable problems with it, but never expected to find that the brakes, grease seals, and wheel bearings were in installed correctly. I became aware that there were many reports of problems with the grease seals and wheel bearings. I was in texas and we had the grease seals and wheel bearings serviced. I was shocked to see that all of the grease seals were leaking and the bearings were not adjusted correctly. I had all of the grease seals replaced and the bearings packed correctly and installed correctly. I am amazed that we had not had a catastrophic failure in the 15,000 miles that we had travelled. This IS a potentially very dangerous situation.
- Service brakes
The axle grease seals installed by lippert components have failed. this has caused grease to enter the brakes and resulted in diminished braking capability. *tr
- Structure › Body · Unknown or other · Wheels
While camping with this 5TH wheel camper, upon inspection of why the fenders were vibrating so much while traveling down the highway, two of the braces were broken and ready to fall off. Since then I inspect these braces because I don't want to cause an accident by one breaking off and hitting a…
While camping with this 5TH wheel camper, upon inspection of why the fenders were vibrating so much while traveling down the highway, two of the braces were broken and ready to fall off. Since then I inspect these braces because I don't want to cause an accident by one breaking off and hitting a car on the highway. I have had another occurrence with a bracket breaking off. I mentioned the brackets breaking on a visit to a dealer. His reply was we have to fix these many times. this seems very unsafe to have the bracket breaking off and possibly hitting a vehicle on the road. The brackets don't break off in the driveway.the bracket IS steel, shaped like a "z", dimensions of about 14 inches x 1 inch by about 1/8 inch thick. at the bottom a self tapping screw IS screwed through the fender to the bracket and at the top another self tapping screw IS screwed through the bracket and into the frame. The flexing IS absorbed by the screw and since they are hardened will break. *tr