Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
The liquid propane (lp) gas supply hose located adjacent to the lp tank can contact the tank plumbing guard causing the hose to wear through allowing lp gas to be released.
Oil mist contained in the engine intake air can collect over time in the brake vacuum check valve preventing the check valve from opening at the specified pressure reducing power assist to the brakes.
These hose assemblies do not contain the assembler's identification. this does not comply with federal motor vehicle safety standard no. 106, "brake hoses."
A general motors (gm) hose which directs the power steering fluid from the power steering reservoir to the power steering pump required relocation to accommodate the air conditioning compressor. the substitute hose was not compatible for…
The brake return spring can contact the hub. further wear of the brake lining material will lead to wear of the return spring and the spring can fail prematurely.
The crossmember frame gussets were installed with undersized threaded fasteners following a breakdown of the production rivet gun that IS generally used. this gusset IS the attachment point for the rear strap of the mid-ship fuel tank.
The certification label on these vehicles contain incorrect tire pressure data. this does not conform to the requirements of federal motor vehicle safety standard no. 120, "tire selection and rims for motor vehicles other than passenger…
The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. these shafts can fracture inside the beam at the toe of the weld.
The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. these shafts can fracture inside the beam at the toe of the weld.
These vehicles exhibit a condition in which a rear seat belt buckle release button can stick in the unlatched (down) position under certain conditions because the buckle assembly can move inside the seat belt cover. If the cover moves far…
These vehicles do not comply with the grade holding requirements of fmvss no. 121, "air brake systems."
The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. these shafts can fracture inside the beam at the toe of the weld.
Under conditions of full lock steering and full suspension travel, the left or right front wheel-side brake hose can crack, resulting in brake fluid leakage.
The equalizing beam shaft of the tandem axle suspension were manufactured from as-rolled sae4140 steel rather than the specified annealed sae4140. these shafts can fracture inside the beam at the toe of the weld.
Temperature problems are occurring when these buses are operating on compressed natural gas.
The rubber fuel filler pipe can become brittle and allow fuel to leak.
An item worn by a child, such as a long drawstring, sash, or backpack/bookbag accessory, can become caught in the area between the service door and the door control rod attaching bracket.
The steering gear mounting plate can crack around the welds.
Vehicle description: light duty extended cab conversion pickup trucks by mariah custom. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly recline.
Vehicle description: light duty extended cab conversion pickup trucks by kustom kreations. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly recline.
The bolts holding the rear wheel brake backing plate to the axle were not torqued to correct specifications and can loosen.
The bolts which secure the integrated child seat modules to the seat frame can break.
The pitman arms were not fully lubricated at the assembly plant. The "ball joint" at the outer end of the pitman arm can become contaminated and corrode.
Vehicle description: light duty extended cab conversion pickup trucks by american van. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly recline.
Vehicle description: light duty extended cab conversion pickup trucks by monroe truck equipment. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly…
Vehicle description: light duty extended cab conversion pickup trucks by master vans. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly recline.
A lack of weld penetration attaching the wheel center to the rim.
The rear window buzzer does not comply with fmvss no. 217, "bus window retention and release." the buzzer switch does not activate and/or the window IS not closed when the latch IS not in the closed and locked position.
Vehicle description: light duty extended cab conversion pickup trucks by sunset. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly recline.
Vehicle description: light duty extended cab conversion pickup trucks by bill heard. the seat recliner to seat frame attaching bolts on these vehicles could loosen, fatigue, and fracture, allowing the seat back to suddenly recline.