Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
The front brake line hose can kink during front brake action.
When the vehicle IS being driven, the force of the wind against the hood can force the hood behind the bumper allowing the hood to drop. this reduces the tension on the two rubber hold-downs which then become loose.
Improperly installed remote start units can permit remote engine start while the vehicle IS in gear.
Vehicle description: these vehicles were built for the u. S. Postal service. the control switch for the back-up lights were omitted during assembly.
These buses with gross vehicle weight ratings (gvwr) of 36,200, do not meet the brake size and power requirements of federal motor vehicle safety standard (fmvss) no. 121, "air brake systems," for vehicles of that gvwr.
Equipment description: axles used as replacement equipment for marmon-herrington all wheel drive conversion kits. also used as original equipment in certain eldorado national buses. an incorrect welding material was used to join the…
Equipment description: aftermarket cruise control units sold by audiovox, moss motors, S&S automotive and warshawsky. these aftermarket cruise control units can accelerate above the intended set speed.
The "o" rings of the regulator assembly in the onan emerald and marquis brand generator sets can weaken and break when exposed to high ambient temperatures.
The nut that secures the vehicle's main power supply can loosen causing loss of contact.
Some of these vehicles have a strained or separated washer/wiper switch power feed wire.
During the installation of the camper equipment, an improperly adjusted power tool drill bit punctured the fuel tank vapor container.
The electrical contacts in the power mirror switch can accumulate road salt due to water entering into the switch.
This IS not a safety recall in accordance with federal regulation 573. however, it IS deemed a product improvement campaign by the agency. the shoulder belts may not be properly located when the child IS placed in the restraint. the…
Vehicle description: buses equipped with isringhausen seats in the driver position. two welds located on the back rest adjustment side of the seat frame did not meet the manufacturer's specifications.
Certain clothing articles such as draw strings can become lodged in the forward handrails at the bus doors when a person IS exiting the bus.
The electric motor which drives the anti-lock brake system (ABS) hydraulic pump does not function after a period of operation.
The spare tire carrier hoist components can become loose while traveling and allow the spare tire to move from its stored position to the road surface.
The transmission range selector pad will indicate a drive range when the transmission IS actually in neutral.
These fire trucks do not at least two sources of return energy as required by federal motor vehicle safety standard no. 124, "accelerator control systems."
The top coat paint severely peels due to overbaking of the powder primer prior to the top coat application. since the windshield primer and adhesive adhere to the top coat paint onthe windshield opening flange, the windshield does not…
Corrosion can occur in the foot brake valve adapter bore and plunger due to water and road salt intrusion.
The top coat paint severely peels due to overbaking of the powder primer prior to the top coat application. since the windshield primer and adhesive adhere to the top coat paint onthe windshield opening flange, the windshield does not…
Due to undersized rivets and oversized holes, the b-pillar anchorage will not meet the requirements of federal motor vehicle safety standard (fmvss) no. 210, "seat belt assembly anchorages."
Tire description: treadway sport metric a/s 185/70r14 tubeless radial standard load tires manufactured december 8-14, 1996 (u9j6rau496) and december 15-21, 1996 (u9j6rau506) and sport metric a/s 201/70r14 tubeless radial standard load…
These motorcycles were produced with incorrect certification labels. incorrect tire rim data IS printed on these labels. a tire size of 120/70 ZR mt 3.5x17 rim at 32.7 psi cold, and 170/c0 ZR mt 5.50x17 rim at 36.9 psi cold. the proper…
Equipment description: champion car seats manufactured from june 1, 1993 through november 22, 1996, containing model numbers beginning with the first three digits "224." scout car seats manufactured from june 1, 1993 through december 16…
Pressure on the battery ground lead (the crimped and soldered termination of the battery cable) from the base of the operator's seat can cause the battery terminal to short out inside the battery.
Vehicle description: transit buses equipped with isringhausen seats in the driver position. two welds located on the back rest adjustment side of the seat frame did not meet the manufacturer's specifications.
Vehicle description: buses equipped with isringhausen seats in the driver position. two welds located on the back rest adjustment side of the seat frame did not meet the manufacturer's specifications.
Vehicle description: buses equipped with isringhausen seats in the driver position. two welds located on the back rest adjustment side of the seat frame did not meet the manufacturer's specifications.