Vehicle recalls
30,429 recall campaigns from NHTSA, newest first. Decode a VIN to see the ones for your car.
Vehicle recalls per year
Most recalled systems
Latest recalls
Vehicle description: passenger vehicles. the front suspension lower control arms may have been inadequately welded between the pivot tube and the arm.
Vehicle description: MINI vans. the wiring that initiates the driver and/or passenger air bag could electrically short circuit to ground. a short circuit to ground that exists immediately after turning the ignition key to the "on" or…
Vehicle description: heavy duty trucks equipped with hydraulic brakes. the hydraulic brake tube to the front left brake can contact the bottom frame rail flange.
Vehicle description: motor home chassis. these vehicles do not comply with the dash light intensity requirement of fmvss no. 101, "controls and displays."
Vehicle description: passenger vehicles. moisture can enter the air bag inflatable restraint electronic control module (ecm) and cause corrosion on portions of the ecm printer circuit boards.
Vehicle description: motorcycles. These motorcycles were built with a rear shock absorber front eye that could break.
Vehicle description: motorcycles. these motorcycles were built with a swingarm that could break.
Vehicle description: motorcycles. these motorcycles were built with a fuel tank vent valve assembly that could become plugged.
Vehicle description: motorcycles. these motorcycles were built with a fuel tank mount system that could, in the event of a crash, allow the fuel tank to separate from the motorcycle.
Vehicle description: heavy duty trucks equipped with dual steering. the steering column welds on these vehicles can fracture, allowing the steering column to separate.
Vehicle description: passenger vehicles. the terminals at the headlight switch and wiring harness connector can experience heat damage as a result of overheating.
Vehicle description: heavy duty trucks equipped with dana/sprague windshield wiper assemblies. the knurled pivot shaft (which operates the windshield wiper arm) IS welded to a lever, which connects to linkage from the wiper motor. the…
Vehicle description: folding trailers. improper tire clearance (less than 5/8") between the wheel and front frame cross member can result in the tire rubbing the metal frame.
Vehicle description: passenger vehicles. it IS possible that the retaining clip that secures the brake booster pushrod to the brake pedal arm was not properly installed during production. it IS possible for the clip to detach from the…
Vehicle description: sport utility vehicles equipped with four-wheel-drive (4X4), 17" chrome steel wheels. the clamp load can be lost on the wheel lugs due to insufficient wheel contact area with the hub. in some cases, the contact…
Vehicle description: bumper-pull horse trailers. the safety cables, used to maintain a connection between the trailer and tow vehicle, are not equipped with thimbles and thus do not conform to sae J684.
Vehicle description: motorcycles. these motorcycles were built with a sidestand switch that could become inoperative
Vehicle description: motorcycles. the rear brake line can chafe, resulting in loss of brake fluid.
Vehicle description: motorcycles. motion of the battery cable can lead to breakage of its terminal.
Vehicle description: all wheel drive passenger minivans. (This includes all 1992 AWD aerostars not previously included in safety recall 97v-204/97s83). These vehicles can develop powertrain bending resonance or transfer case output shaft…
Vehicle description: sport utility vehicles equipped with 4-wheel drive and automatic transmissions. automatic transmission fluid could be vented onto the hot exhaust system as a result of unanticipated heat generation in the…
Vehicle description: pickup trucks equipped with 6" beds manufactured from january 5, 1998 through june 4, 1999, do not not fully satisfy the post crash test static rollover requirements of fmvss no. 301, "fuel system integrity."…
Vehicle description: gasoline and diesel engine pickup trucks equipped with 6" and 8" beds manufactured from january 5, 1998 through march 21, 1999, do not not fully satisfy the post crash test static rollover requirements of fmvss no.…
Vehicle description: transit buses and bus shells. some brake line hoses may have been manufactured using heater hose material instead of brake line hose material. heater hoses are not appropriate for use as brake lines because the…
Vehicle description: passenger vehicles. these vehicles do not comply with the requirements of fmvss no. 214, "side door strength." incorrect position of the side impact pad to the rear, instead of the middle, of the door assembly.
Vehicle description: passenger vehicles equipped with 4t65e automatic transmissions. these vehicles fail to conform to the requirements of fmvss no. 102, "transmission shift lever sequence." a retaining clip, which secures the manual…
Vehicle description: motorcycles. chassis wiring harness can come into contact with the rear shock absorber, causing damage to the harness.
Vehicle description: motorcycles. the front isolator mount system can lose clamp load and possibly break.
Vehicle description: heavy duty trucks equipped with alcoa 984650 24.5 x 8.25 wheels. the affected wheels were improperly heat treated.
Vehicle description: transit buses built on spartan chassis. hydraulic fluid reservoir may be mounted lower than recommended which could reduce the flow of hydraulic oil to the power steering pump.