2020 Altec Aerial Device Jems Hybrid
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Altec › Aerial Device Jems Hybrid › 2020
These records cover every 2020 Altec Aerial Device Jems Hybrid. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10239082Altec has learned that certain units built with a Jobsite Energy Management System (JEMS) S/SE/LE from October 2020 to May 17, 2023, may fail to charge or operate properly, particularly when the battery is cold. Altec has developed a firmware update to resolve this issue.
- 10230983Altec used telematics data to identify JEMS in the field with batteries approaching critical discharge. After the min cell voltage becomes less than 3000mV the battery is no longer rechargeable in the field. To avoid costly battery replacement and decrease customer downtime, a letter describing the Battery Recovery Procedure from the manual was sent to the affected customers.
- 10210275Altec has learned that the engine on certain AT35/37/40G and AT37/41/48 ME/PE aerial devices built from August 2020 to August 2021 on Ford F-450/F550/F-600 gas engine chassis equipped with a JEMS S/SE hybrid system could not enter idle mitigation system (IMS) engine shut down properly when the Jobsite Energy Management System (JEMS) is actuated at a cold ambient temperature with a cold engine block. When shutdown is attempted, the engine will stutter but will remain running. If this happens five times in a row, it will cause the JEMS service light to turn on and the JEMS to become inactive. To resolve this issue, the base idle setting for IMS shutdown must be updated by Altec.
- 10198618The system firmware on the Altec Jobsite Energy Management System (JEMS) S/SE/LE built from 2020 to 2021 is being updated to improve the performance of the telematics system. This update does not affect the operation of the JEMS system. This update can be completed at the next service interval using the AXIS Service Tool. This update is covered under the Altec Warranty Policy and must be performed by Altec.
Every Altec Aerial Device Jems Hybrid model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.