2004 Altec HL125
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Altec › HL125 › 2004
These records cover every 2004 Altec HL125. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2004 Altec HL125. Newest first.
Altec Industries, Inc. is recalling certain model year 2002-2009 AH75/85/100 and HL125 aerial device vehicles equipped with 16-foot radial outriggers. An improper torque was applied to the outrigger cylinder piston retention system during assembly. As a result, the cylinder could loosen from the rod allowing the outrigger leg to protrude beyond the…
Risk and remedy
Risk
If the cylinder loosens from the rod, the outrigger could strike a person or object, increasing the risk of injury or property damage.
Remedy
Altec will notify owners, and will increase the torque on the piston free of charge. The safety recall began on November 6, 2012. Owners may contact Altec Industries at 1-877-462-5832.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10226216Altec has learned that on AH75/85/100, AH75A/85A/100A, and HL125 aerial devices built from November 2003 to January 2021, there is potential for the jib rotational positioning pin to disengage when the platform is tilted down 90 degrees or more from the level working position. This is due to the combination of wear to the edges of the jib indexing plate pinning holes during use and vertical clearance in the jib pivot due to manufacturing tolerances. Altec has developed a kit which provides a new jib rotational positioning pin with greater engagement and adds spacers to limit the vertical clearance in the jib pivot, for use if inspection shows it is required.
Every Altec HL125 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.