1978 Autocar K
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1978 Autocar K. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
5 recalls name the 1978 Autocar K. Newest first.
The bypass oil filter mounting brackets may be insufficiently welded to the radiator frame. This could allow the filter mounting bracket and oil filter to come loose, fall, and wedge themselves within the steering geometry.
Dealer will inspect and, if necessary, reweld the bracket without charge.
Some of the involved vehicles were not inspected for adequate clearance between the steering shaft and its firewall opening. Inadequate clearance could result in the steering column becoming scored or severed by the firewall sheet metal.
Dealer will inspect vehicles and, if necessary, enlarge the firewall opening to provide the minimum 3/8 inch clearance for the steering shaft. Any scored or cut shafts will be replaced without charge to owner.
Lockwashers, used to retain the engine"s fan mounting bolts, may have been omitted during assembly, causing the bolts to loosen and allowing the fan to separate from its mounting hub.
The windshield wiper may over-travel its designed sweep angle during its initial stroke with the possibility of temporary wiper immobilization.
Dealer will install a restriction fitting in the control valve at no cost to owner.
The hose clamp, which was installed around the steering column boot seat to keep noise and dirt from entering the cab, may loosen.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.