2008 Bentley Continental GT Cabrio

Recalls

2 recalls name the 2008 Bentley Continental GT Cabrio. Newest first.

• Service brakes, hydraulic › Foundation components › Disc › Rotor

  Oct 17, 2013NHTSA 13V484000469 vehicles

  Bentley Motors, Inc. (Bentley) is recalling certain model year 2007 through 2011 Continental GT, GTC, and Flying Spur vehicles, manufactured from July 2006 through June 2010 and equipped with carbon ceramic brake discs. In the affected vehicles, the stainless steel screws that secure the brake rotors may fail after being exposed to salty conditions.

  Risk and remedy

  Risk

  Failure of the securing screws may result in a reduction of braking ability, increasing the risk of a crash.

  Remedy

  Bentley will notify owners, and dealers will replace the screws, free of charge. The safety recall began on October 22, 2013. Owners may contact Bentley at 1-800-777-6923. Bentley's number for this campaign is RE13/14.

  Full recall details →

• Fuel system, gasoline › Fuel injection system

  May 15, 2008NHTSA 08V21700013,420 vehicles

  Bentley IS recalling 13,420 my 2004-2008 continental GT, continental GT speed, continental flying spur, and continental gtc vehicles. there IS the potential for road salt to corrode the outer surface of the fuel filter. this could lead to the filter housing becoming porous with a corresponding fuel leak.

  Risk and remedy

  Risk

  A fuel leak in the presence of an ignition source could result in a fire.

  Remedy

  Dealers will replace the fuel filter and reposition the retaining clip on all affected vehicles. the recall began on june 18, 2008. owners may contact bentley at 1-800-777-6923.

  Full recall details →

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11009579Measured values - Cycle recording instructions. Technical background The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis.
• 11002706Electronic Parking Brake (EPB) control unit cannot be coded. Customer statement / workshop findings The Electronic Parking Brake (EPB) control unit cannot be coded when using a diagnostic machine with Windows 10 in conjunction with a VAS 6154 dongle.
• 10254080Convertible roof - C flap Bowden cable replacement Customer statement / workshop findings: Check convertible roof function. Technical background: Continual improvement in system designs can produce developments that may benefit older vehicles. One such development has been identified in the convertible roof mechanism. Re-route the C flap Bowden cable using a longer cable reduces the friction build up in the system and thus promotes smooth operation of the C flap and longevity in the system.
• 10254013Electronic Parking Brake (EPB) control unit cannot be coded. Customer statement / workshop findings: Workshop findings: The Electronic Parking Brake (EPB) control unit cannot be coded when using a diagnostic machine with Windows 10 in conjunction with a VAS 6154 dongle
• 10252818HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
• 1025244612 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section.
• 10246358Spurious DTC identification. Customer statement / workshop findings: Customers will not be aware of any DTCs, workshop operatives may discover spurious DTCs whilst running Guided Fault Finding (GFF) when using ODIS Technical background: To determine the course of action which should be taken the operative should refer to the Bentley Hub referencing the following: Spurious DTC list for TPI 2072055 The document contains all known spurious DTCs for all applicable vehicle variants.
• 10246327Hood rear bow clash to tonneau cover - prevention (SC16/21). Technical background: Unable to operate convertible roof due to tonneau cover to rear bow clash. The reinforcement plate inside the roof which assists the smooth operation of the system deforms and catches between the frame and the hood. This clash condition if not prevented could also result in damage. to the hood frame tension straps.
• 10245096Engine Coolant Mixture - Restrictions on use of desalinated water Customer Statement: -Engine coolant requires topping up or replacing
• 10245093Brake Noise Identification: Customer Statement: -Noise/squeal complaint from the braking system Technical Background: -The noise/squeal can be reproduced and clearly assigned to the braking system
• 10245063V8 Kovomo - Emission control warning illuminated within the DIP - Exhaust Gas Temperature Sensor DTCs evident Customer Statement: -Emission control system warning lamp illuminated (Figure 1) within the Driver Information Panel (DIP)
• 10245059Knocking noise from the front and/or rear - DTC C1298F1 evident within D4 and/or D5 Customer Statement: -Knocking noise from the underside of the vehicle (front and/or rear) when driving on uneven road surfaces - DTC C1298F1 (Suspension stabilization actuator Regulation not possible) evident within diagnostic address D4 and/or D5 -Bentley Dynamic ride fault evident within the DIP
• 10245058Knocking noise from the front and/or rear (Driving over an uneven road surface) Technical Background: The noise present in the sound file can be caused by worn anti roll bar bushes, the noise can appear when driving over an uneven road surface or during a large suspension input for example: Speed humps or potholes
• 10244967Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
• 10244673Sun visor mirror cracked Customer Statement: -Driver or passenger sun visor mirror cracked/broken
• 10244649Running gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
• 10244648Infotainment screen turns red sporadically Customer Statement: -Infotainment screen 'Goes Red Fully or partially' within the MMI Screen (Figure 1)
• 10244647Battery conditioner inoperative Technical Background: -Corrosion on the contact surfaces of the charger socket and charger lead. If the charging socket or charger lead are wet when the charger is connected this can cause corrosion on the contacts.
• 10244633New Continental GT - Spurious Mood lighting DTC's Customer Statement: -Upon interrogation of the vehicle fault memory spurious DTCs can be logged in 09 Central Electrics relating to the Mood lighting system The lamp is fully functional and there is no customer complaint
• 10244632New Continental GT and GTC - Rattle / Buzzing Noise - Head-Up display Customer Statement: -Rattle / buzzing noise from Control Unit for Head-Up display - dashboard upper trim panel.
• 10244628New Continental GT/C - Door 'soft close' functionality Customer Statement: -Correct functionality and restrictions of the door soft close system need to be understood to prevent unnecessary customer complaints.
• 1024366412 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section
• 10243663All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customers will not be aware of any fault codes Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
• 10242269HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
• 10241847HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
• 10240565HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. In the event that HVAC cleaning products are required, these MUST be sourced locally. Before using the cleaner the operative must inform the customer of the product which will be used, a neutral fragrance cleaner should be used as the customer may not like the smell of the cleaner should a fragranced product be used Please ensure all supporting information is included within the DISS query when requesting permission to clean the HVAC system including clear photographs and/or videos showing the reported issue, should the required information not be supplied the warranty claim could be cancelled.
• 10239487Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: - Poor engine running - Reduced power - Engine warning lamp illuminated - Symptom related DTCs evident within the applicable engine control unit(s) Technical background: Technical Product Information (TPI) to assist retailers when diagnosing poor engine running or misfires.
• 10235589HVAC Refrigerent Leakage - Diagnosis Guidelines Customer Statement: -HVAC not cooling or HVAC cooling less than expected
• 10232931Front Crankshaft Seal - Replacement Guidelines Customer Statement: -In the event the following is required to be replaced: -Front crankshaft seal -The operative should refer to the technical background section of this TPI
• 10230822Speaker Replacement - Diagnostic Checks Technical Background: -There have been instances where door speakers have been changed under warranty for the complaint of sound distortion, yet when tested by ourselves and the supplier, no fault could be found with the returned unit.
• 10226813Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
• 10226808Usage of E10 Fuel Customer Statement: -In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI
• 10226802Telephone Functionality Complaint- Minimum Standards Required For Analysis of Concerns Customer Statement: -The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported.
• 10226776Running Gear - Noise Identification Customer Statement: -Noise complaint from the suspension and/or steering
• 1022674712 Volt - Battery Test Instruction Technical Background: -For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the measure of this section of this TPI.
• 10224810Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
• 1022434812 Volt- Battery Condition Checks. Technical background For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI.
• 10219147Air spring fault finding Customer Statement: -The front and/or rear suspension appears to have dropped Technical Background: -Bentley vehicles which are applicable to this TPI are fitted with air springs as part of the suspension system. Should air leak from the air spring dampers, this will cause the suspension to drop. However, the dropping of the suspension does not necessarily mean that the air spring is faulty. -The Measure section of this TPI describes how and where to check for air leaks on the front and rear air springs, the air supply unit, pipes, valve unit and air reservoirs. This includes potential air leak points on the air spring dampers and also the locations of an air leak that can be repaired without the need to replace an air spring damper.
• 10213165Convertible hood - Header latch motor assembly kit. Customer statement / workshop findings: The convertible header latch motor is now available separately (Figure 1) Technical background: In the event that the header latch motor is diagnosed as defective For example: The header latch can only be unlocked/locked manually please refer to the Measure section of this TPI.
• 1020297412 Volt - Battery condition checks. Customer statement / workshop findings: 12 Volt Battery test instruction Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI

Every Bentley Continental GT Cabrio model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.