2011 BMW 328
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2011 BMW 328. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
1 recall names the 2011 BMW 328. Newest first.
BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i…
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
My BMW 328I E93 has the service engine soon (ses) light come on while I was driving on the highway. The computer shows error code 2B3A (p1449 dmtl system fault). I cleared the code and it came back a week later. I tried replacing the gas cap and the error still comes back the same. I was doing further research and came across this article (attached) from nhtsa.gov describing the same exact problem, with the same exact code and even my engine IS the same N52K for my E93 328I. https://static.nhtsa.gov/odi/tsbs/2012/sb-10051299-3508.pdf the dmtl pump IS there to help reduce emissions and if the system IS faulty, the BMW dealership should honor the request for service work to replace the dmtl pump under the emissions/extended emissions warranty. I called and they said there's no recall for this vin so they can't help me...and they are making me pay for the diagnostic fee...but I do in fact have my emissions warranty still in effect for the vin which IS 8 years or 80,000 miles, whichever comes first. it seems that there needs to be an active recall for these faulty dmtl pumps/systems as this problem exists for engines like mine -the N52K engine. I encourage the nhtsa to take a look into this matter and work closely with BMW north america to institute a remedy for this. thank you in advance and have a nice day.
Sometimes when I try to open the driver's side door using the mechanical handle, door does not unlock. I have to use my key fob to remotely unlock the car before the door handle will work to open the door.
The door handle actuator sporadically fails and the door can not be opened with either the inside or outside door handle.
I have a BMW 328I series 2011 4 door sedan vehicle ) I purchased my car 2018 april and since the 1 st day it has given me electrical problems diagnostics nor any mechanic have found soultion the vehicles battery suddenly drains I have gotten 5 new batterys replaced because they end up being bad and I always have a drained battery after 3 or less hours of recently usage also the vehicle in various occasion turns of in the freeway ,while driving in the street etc. When it shutsdown lights flicker ,and in dashboard theirs shortage noise and in the dashboard the ground picture with the vehicle IS red (no check engine ) my brake light IS permanently on then after 1-2 min car turns on completly well and the ground logo with the vechile IS yellow but it can turn of and do the same in 1-3 min or sometimes it wont do it until 4 hr or the next day but it IS a constant thing everytime I drive the vehicle I have started to worry because I noticed my battery full of acid and I replaced it three time because tr scid IS melting the metal were the battery goes and it IS next to the gas tank
Takata airbag problems on the passenger side of the vechicle. when I bought this car from the third party dealership, 'chase autoplex' he resetted the settings everything was working properly, but after getting home, the next day my car showed airbag problems. When I called him, he said he can't help me out with it. So my question IS that, if you guys can help me get a recall on this airbag, so I don't have to spent money on it myself, I will appreciate it. Thanks
Electrical system malfunction. BMW dealer ship not taking responsibility for these defects, the sparks plugs keep burning out due to the car overheating.
I called the dealership (motorworks BMW in bloomington mn) regarding two open recalls (pcv heater and air bag) they told me that the airbag was not affected but they would repair the pcv heater. I am more concerned about the air bag as it IS related to crash safety.
Both driver and passenger led tail lights are starting to fail. Both are flickering and one IS dimming, this IS happening on the tail gate mounted lights
Have a recall on blower motor wiring and valve heater. Took my vehicle to dealer couple of time, they checked and notified that some wires are burning and needs to be replaced but unable to do so due to part not available. It's been couple of months now and I haven't heard from the dealer.
TL* the contact owns a 2011 BMW 328. While driving 45 mph, the contact heard an explosion coming from the air conditioner/heating system. The contact noticed fumes coming from the vents. The contact pulled the vehicle over to the side of the road and turned off the engine. Upon restarting the vehicle, the air conditioner failed to operate. The contact mentioned that during the winter season, condensation appeared on the windows when the heating system was activated. The vehicle was taken to park ave BMW (530 huyler st, south hackensack, nj 07606, (201) 843-4999) where it was diagnosed that the blower motor wiring needed to be repaired. The vehicle was repaired. The manufacturer was not made aware of the failure. The contact received a recall notice for nhtsa campaign number: 17v676000 (electrical system). The failure mileage was 73,450. Vin tool confirms parts not available. *Tt *tr
Cluster malfunction, one morning after a snowstorm I started the car and all lights on dash and gauges started to malfunction on and off. I took it to the dealer that dealership said the cluster IS bad the rdc control unit. TPMS, battery and kombi wiring. And ask for a real high price to repair. After I take it to a few local BMW shops and everyone IS asking me if I got the recalls done but only one recall of three IS available to fix. Some thinks it's water damages and BMW didn't check the car properly.
Blower motor wiring and positive crankcase ventilation (pcv) valve heater. car feels hot sometimes I went to the dealer already and was told someone would call me back IS been over 2 months already
Over heat ac
I received notice in october that there IS a recall however the BMW dealership informed me that "yes there IS a recall but we will not be ordering parts until after jan 2018", well how safe am I driving this car.....they act like it IS not a concern...????
The door has melted.
Takata recall airbags contain metal fragments which can can cause severe injury
Takata recall
My rima keep cracking on normal pothole drives. I had three wheels fixed once, and one wheel fixed twice. Then I had to replace another wheel with a new wheel from BMW dealership because r was not repairable. The rims are oem starspoke 194 m
Takata recalls? When I start my car, I keep getting a message "passenger restraint malfunction" involving seat belt, air bag, etc. if I don't connect my seat belt on the passenger side when no one IS in it, the bell keeps ringing.my car IS not on the list of recalls for this. why isn't my car on the recall list?
Getting "passenger restraint system" error for no apparent reason at all. I'm afraid the airbags won't deploy in case of accident.
Fumes coming into cabin, BMW service center states that it IS the initial burning off of the fuel when car IS started, yet it can be detected an hour after the car has been running, especially if the air conditioning IS on
Takata inflators: I have been waiting almost a year for BMW to replace this airbag. I cannot sell the vehicle to a dealer until this IS replaced. I expect my airbag to be replaced now. I want BMW to complete this asap...all I get from them IS "parts are not available at this time"....
Takata recall got recall notice march 2016 have checked with BMW dealer 3 times and am told I am on the list. I live in atlanta, ga but have a condo at panama city beach, fl and drive back and forth regularly. I don't understand why it IS taking so long when this IS such a major safety issue. I understand there IS a priority list and I would like to be on it given the age of my vehicle and where I live.
Aluminum headbolt sheared off causing internal damage resulting in car losing power and not being able to get off the roadway. this IS an N52 engine and complaints are that this problem IS solely caused by an over torque of the bolt during manufacturing.
TL* the contact owns a 2011 BMW 328. The contact stated that the seat belt sensor detected an occupant in the passenger seat when it was unoccupied. The dealer diagnosed that the sensor malfunctioned due to the heat from the leather seat. The vehicle was not repaired. The failure mileage was 80,000.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.