2011 BMW 328XI

Recalls

3 recalls name the 2011 BMW 328XI. Newest first.

• Air bags › Frontal

  Jul 3, 2024NHTSA 24V513000394,029 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that…

  Risk and remedy

  Risk

  An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

  Remedy

  Dealers will inspect and replace the driver's air bag module as necessary, free of charge. Owner notification letters were mailed August 30, 2024. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

• Air bags › Frontal › Driver side › Inflator module

  Jan 15, 2020NHTSA 20V01700059,965 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i…

  Risk and remedy

  Risk

  An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

  Remedy

  BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

• Electrical system › Wiring

  Oct 25, 2017NHTSA 17V676000702,965 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.

  Risk and remedy

  Risk

  Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.

  Remedy

  BMW will notify owners, and dealers will replace the wiring and electrical connectors, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notice when the remedy becomes available. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

Owner complaints

What owners report most

1. Engine24
2. Electrical system17
3. Air bags15
4. Engine and engine cooling9
5. Fuel/propulsion system7
6. Vehicle speed control6
7. Unknown or other5
8. Power train4
9. Exterior lighting3
10. Seats2

Latest complaints

• Jul 30, 2024MA
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

• Jul 12, 2024IL
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

• Mar 12, 2024MA
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

• Mar 4, 2024VA
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

• Mar 1, 2024KS123,200 mi
  Engine

  The contact owns a 2011 BMW 328XI. The contact stated that on several occasions when the vehicle was started, the vehicle started shaking abnormally. Additionally, while driving on several occasions at slow speeds, the vehicle was shaking abnormally. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 123,200.

• Feb 5, 2024MD133,000 mi
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated while driving at various speeds, the engine made an abnormal sound, and the…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated while driving at various speeds, the engine made an abnormal sound, and the vehicle experienced reduced motive power. The contact stated that the vehicle failed to operate as needed. The message "Service Engine Soon" was displayed. The local dealer was contacted. The dealer diagnosed the vehicle and determined that the failure was related to the recall. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 133,000. VIN tool confirms parts not available.

• Jan 5, 2024MI122,000 mi
  Engine
  The contact owns a 2011 BMW 328XI. The contact stated while driving at an undisclosed speed, the vehicle was shaking excessively from the engine compartment. The contact stated while driving, the 4WD, brakes, and Service engine warning lights were illuminated. The contact stated that while the…

  The contact owns a 2011 BMW 328XI. The contact stated while driving at an undisclosed speed, the vehicle was shaking excessively from the engine compartment. The contact stated while driving, the 4WD, brakes, and Service engine warning lights were illuminated. The contact stated that while the warning lights were illuminated, the cruise control was inoperable. The dealer was not contacted. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 122,000.

• Jul 25, 2022RI120,000 mi
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the vehicle experienced hard started and would vibrate abnormal while started. The contact stated that the check engine warning light was illuminated due to a failed O2 sensor. The approximate failure mileage was 120,000. Parts distribution disconnect.

• Jun 8, 2022PA
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the vehicle overheated while the HVAC system was turned on. Additionally, the vehicle jerked and there was smoke coming from the exhaust pipe while driving. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not diagnosed nor repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.

• May 26, 2022IL
  Engine and engine cooling

  The contact owns a 2011 BMW 328XI. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. The VIN was invalid.

• Aug 12, 2021ME52,202 miFire
  Engine and engine cooling
  The contact owns a 2011 BMW 328XI. The contact stated that while driving at unknown speeds, an odor appeared from the exhaust pipe and under the hood where the engine was located. The contact mentioned that every year the oil was changed at an independent mechanic where it was diagnosed and…

  The contact owns a 2011 BMW 328XI. The contact stated that while driving at unknown speeds, an odor appeared from the exhaust pipe and under the hood where the engine was located. The contact mentioned that every year the oil was changed at an independent mechanic where it was diagnosed and determined that the valve gasket failed and needed to be replaced. The vehicle was not repaired. The failure recurred. The contact feels unsafe driving the vehicle. The manufacturer was notified of the failure and provided the contact with a case number. The dealer was contacted and confirm that no recalls under the VIN. The contact mentioned NHTSA Campaign Number: 17V683000 (ENGINE AND ENGINE COOLING) as a possible solution to the failure however the VIN was not included. The failure mileage was approximate 52,202

• Apr 20, 2021WI112,000 mi
  Engine · Fuel/propulsion system · Power train

  My vehicle IS experiencing the same symptoms and IS reporting the same trouble codes related to recall number: 17v683000. However, my vehicle IS not included in this recall. I would appreciate it if this matter could be investigated and my vehicles vin included in this recall.

• Feb 8, 2021MA110,000 mi
  Engine
  Bolts holding the vanos unit housing broke and damaged my car engine. This should have been addressed in the us market as they have done in chinese market back in the 2014. engine IS making lout noise and damaged with couple bolts snapped inside. the car IS not working and IS with BMW gallery…

  Bolts holding the vanos unit housing broke and damaged my car engine. This should have been addressed in the us market as they have done in chinese market back in the 2014. engine IS making lout noise and damaged with couple bolts snapped inside. the car IS not working and IS with BMW gallery in rockland, ma. the car has only 11,0000 miles on it, which shouldn't have engine problem like that. https://www.autoblog.com/amp/2014/04/11/bmw-broadens-engine-bolt-recall-nearly-half-million-cars-worldwide/

• Dec 7, 2020PA100,240 mi
  Engine
  Aluminum bolts on vanos intake actuator/phaser snapped. Caused internal engine damage. Had repaired, engine light remains, engine IS in timing. Called BMW dealership in pa. They stated no recalls for issue, no tsb's. I found a nhtsa campaign that matches the description of what happened 14v76000…

  Aluminum bolts on vanos intake actuator/phaser snapped. Caused internal engine damage. Had repaired, engine light remains, engine IS in timing. Called BMW dealership in pa. They stated no recalls for issue, no tsb's. I found a nhtsa campaign that matches the description of what happened 14v76000, BMW dealer did not recongnize campaign. Cannot resell the vehicle with cel & spent thousands trying to repair. Upside down on the car & frustrated.

• Jul 9, 2020CO105,980 mi
  Tires

  I have bridgestone driveguard run flat tires ... Just had my 3RD blow out of a front tire in the last 18 months. Only 3 blow outs I've ever had in 48 years of driving. The blow out today was the replacement tire for the blow out 18 months ago ... So quite new with little wear. In all 3 cases the tire blew out (fractured) where the bead intersects the tire rim.

• Oct 24, 2019NC56,000 miCrash
  Engine
  TL* the contact owns a 2011 BMW 328xi. While driving various speeds, the vehicle overheated, and the check engine and oil indicators illuminated. On august 26, 2019, the vehicle was towed to rick hendrick BMW (1518 savannah hwy, charleston, sc 29407, (843) 261-5760) to be repaired per nhtsa…

  TL* the contact owns a 2011 BMW 328xi. While driving various speeds, the vehicle overheated, and the check engine and oil indicators illuminated. On august 26, 2019, the vehicle was towed to rick hendrick BMW (1518 savannah hwy, charleston, sc 29407, (843) 261-5760) to be repaired per nhtsa campaign number: 17v683000 (engine and engine cooling). On august 27, 2019, the contact's vehicle was involved in a crash while being test driven by a mechanic. There were no injuries. The contact was notified of the crash the following day. On august 29, 2019, the contact went to the dealer to speak with a manager and was informed that he would need a police report before they could make any decisions regarding his vehicle. A police report was filed. The contact had not spoken with his insurance company. On september 3, 2019, the contact was provided a repair estimate via email at the cost of $4,751. The contact was informed that the rec eccentric shaft sensor with the valve cover, oil filter solenoids, spark plugs, coils and other oil related failures in the engine needed to be replaced. On october 15, 2019, the contact was informed that his bumper had been replaced by the insurance company of the driver who crashed into his vehicle and that he was "all set to go". Upon his return home, the vehicle began smoking and the check engine indicator illuminated. The contact had the vehicle towed back to the dealer. The contact was denied a loaner vehicle. The contact was unaware of the vehicle's whereabouts. The failure mileage was 56,000.

• Oct 10, 2019OH67,000 mi
  Power train

  TL* the contact owns a 2011 BMW 328xi. While driving at a low rate of speed, the vehicle stalled and shut off without warning. Also, the service engine indicator illuminated. The contact associated nhtsa campaign number: 13v044000 (electrical system) with the failure. The dealer and manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 67,000.

• Jun 23, 2019CT
  Electrical system · Engine · Exterior lighting

  When I turn on my air conditioning my car overheats when I was driving home from work it started to overheat and I was stuck on the highway for about 2 hours I need this problem fixed as soon as possible I am in fear of this happening again

• May 24, 2019NC100,000 mi
  Air bags · Air bags › Sensor › Occupant classification · Air bags › Sensor › Occupant classification › Front passenger
  Passenger restraint system error: when passengers sit in front passenger seat a warning comes on and disables airbag even when belt IS buckled or not, driving or stationary. Warning stays on after passenger exits. Warning stays on for about 50 miles of driving and resets until the seat IS sat in…

  Passenger restraint system error: when passengers sit in front passenger seat a warning comes on and disables airbag even when belt IS buckled or not, driving or stationary. Warning stays on after passenger exits. Warning stays on for about 50 miles of driving and resets until the seat IS sat in again. online forums show recall for this in other models but not mine yet much IS being reported. Seems the seat sensor pad goes bad. very few people sit in this seat so the sensor system should not be malfunctioning/wearing out. it IS intermittent but frequent suggesting it IS the same symptom issue as other BMW models with recalled seat sensor pads.

• May 17, 2019CO100,000 mi
  Engine
  Vehicle showed check engine light and was idling rough during commute. engine shutoff/stalled while stopped at a stoplight. was able to restart and return home, but idle remained rough. attempted to drive to repair shop on another day, idle was rough upon engine start and check engine light…

  Vehicle showed check engine light and was idling rough during commute. engine shutoff/stalled while stopped at a stoplight. was able to restart and return home, but idle remained rough. attempted to drive to repair shop on another day, idle was rough upon engine start and check engine light remained on. car again stalled at an intersection while stopped at a red light. engine would not re-start and vehicle required a tow to get it to shop. dealership service center explained that vanos bolts had sheared and IS the exact issue described in BMW recall campaign vanos sib 14v-176. in spite of my vehicle matching the make, model, year, and engine type described in the recall, BMW informed me that my vin was not showing any recall. it appears BMW of north america has either intentionally or through negligence omitted certain vehicle vins from the recall bulletin, even though they are subject to the malfunction specified (shearing of vanos bolts).

• Apr 16, 2019NY68,500 mi
  Electrical system · Engine · Unknown or other
  My vehicle was making a squealing noise, was louder when running but sitting still. Took it to a garage and valve cover gasket was leaking apparently. I know this happens to cars but my BMW IS a 2011 with only 65500 miles at the time.. Costed me 1000 dollars to fix and a month before this they…

  My vehicle was making a squealing noise, was louder when running but sitting still. Took it to a garage and valve cover gasket was leaking apparently. I know this happens to cars but my BMW IS a 2011 with only 65500 miles at the time.. Costed me 1000 dollars to fix and a month before this they did a recall on the pcv valve and had it tore apart. Maybe it was someone's mistake when reassembling the pcv valve heater during recall at BMW dealer at towne auto in williamsville near buffalo ny?? Idk but that IS low mileage for this to happen

• Nov 8, 2018TN108,000 mi
  Electrical system · Fuel/propulsion system
  11/2016 - car stalled on the interstate and wouldn't restart. Complete power failure (engine, brakes, steering) - mechanic replaced a gas valve. the exact same problem happened twice more. BMW replaced the fuel pump and now wants to replace the control module. all this within 3000 miles. seems…

  11/2016 - car stalled on the interstate and wouldn't restart. Complete power failure (engine, brakes, steering) - mechanic replaced a gas valve. the exact same problem happened twice more. BMW replaced the fuel pump and now wants to replace the control module. all this within 3000 miles. seems like a major fuel system failure. 04/03/18-104795 miles on the vehicle it was brought in for -blower motor recall was performed due to the fact that yours was inoperable -pcv valve recall -check engine light was on and the cause was the fuel pump. car has been driven 2766 miles in between the next visit. 09/28/18-107561 miles on the vehicle it was brought in for -a/c service due to the a/c not being cold enough. -sluggish running (cause was the differential pressure sensor) an emissions item that has nothing to do with the fuel pump and the vehicle also needed the (charcoal canister) replaced, also an emissions item. car has been driven 487 miles 10/23/18-108048 miles on the vehicle it was brought in for -awd/abs/emergency ebv light IS on-( this IS controlled by the vtg module) I'm not getting a signal from this module. After inspecting what we could of the module that IS when the technician found that there was water in the passenger rear floorboard. -fuel pump message on the screen (cause IS the ekps module) the module controls what the fuel pump does. If this module IS malfunctioning then the fuel pump isn't operating properly resulting in the 'fuel pump' message on the screen. it IS the same issue, yet they have "fixed" two different parts of the fuel system already. what are the odds that a third, even more expensive part would fail so soon?

• Sep 25, 2018NY64,785 mi
  Electrical system · Engine · Fuel/propulsion system
  Before any prompts on the navigation screen ever came up, I would often sometimes smell something burning or giving off a hot rubber smell which I addressed as soon I purchased the vehicle from queens auto mall auction, they said it was nothing to worry about if I did not see the check engine light…

  Before any prompts on the navigation screen ever came up, I would often sometimes smell something burning or giving off a hot rubber smell which I addressed as soon I purchased the vehicle from queens auto mall auction, they said it was nothing to worry about if I did not see the check engine light on. While I was driving my BMW 328 xi 2011 the car suddenly lost power and a fuel pump malfunction display prompted on my navigation screen. The car stopped on a bridge in the left lane without me being able to pull over. The car would not start up again at all after several attempts. I waited about 30 minutes and the car started up again. I drove it back home 5 min away and got my vehicle towed to the BMW of manhattan where they say they took care of the problem. once I picked up the vehicle, I drove for approximately 25-30 minutes before the same exact thing happened again and I was barely able to switch into the right lane so I can pull over and have another tow come and take my car to BMW of manhattan just an hour after I had it serviced. I had the recall for the pcv valve heater replaced at that service so I know the same fire/rubber burning smell can't possibly be from that valve recall. I have seen online many people have the same problem with their 3 series, and I am concerned this may be an underlying issue with all 3 series BMW 2006-2011. In both of these separate instances I was driving and was very scared that I could have gotten into a serious car accident in new york city

• Sep 12, 2018KS111,000 miFire
  Electrical system
  For several months my air conditioner had been blowing warmer air than normal but was tolerable. A week ago, while driving on the interstate I smelled a burning plastic smell. Almost immediately my air conditioner shut off. Following that the radio and display shut off as well. I pulled over to the…

  For several months my air conditioner had been blowing warmer air than normal but was tolerable. A week ago, while driving on the interstate I smelled a burning plastic smell. Almost immediately my air conditioner shut off. Following that the radio and display shut off as well. I pulled over to the shoulder of the road and put the car in park. At that point I noticed white smoke coming from the vents in the dash. I grabbed some things and got out of the car. Within 2 mins of notching the burning smell, flames began coming out from under the passenger side of the dashboard. My car was totally engulfed within several minutes before the fd arrived on scene. The car IS a total loss with the fire contained from the dashboard back through the cab of the car. After reading about the blower motor recall, I suspect the ac not functioning properly was in direct relation to the issue. I never received any recall notifications about potential fire issues. It was not until my car burned and I started researching that I came across many reports of very similar issues.

• Aug 28, 2018NY
  Electrical system

  2 recalls for risk of fire filed in oct 2017. 17v676 & 17v683. Notice received 12/02/ 2017. to date 8/28/2018 no remedy available! both known fire risk and no action from BMW 9+months later.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10249437The basic conditions for initializing the power windows are not met.
• 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
• 10215024The engine?s intake charge-air duct limited warranty extension to 10 years/120,000 miles applies to ?eligible USspecification
• 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
• 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
• 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
• 10160287TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
• 10160244TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
• 10153726Takata class action settlement. Customer support program. Front driver side airbag modules.
• 10152314Door Open Message Displayed, Even Though Door Is Closed. The customer complains that while driving, a CCM (check control message) indicates the doors are open, even though they are closed. Also, sometimes the gong will sound and the interior lights will go on and off. Unspecified FRM door lock status due to voltage variations
• 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
• 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
• 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
• 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
• 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
• 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
• 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
• 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
• 10150365"N51, N52K and N52T: Idle Fluctuation During Engine Warm-up Phase. After a cold engine start, the idle speed may be unstable or start fluctuating up and down slightly while the vehicle is stopped. On vehicles with automatic transmissions, roughness or shuddering may be felt during this warm-up period when diving away slowly in ""D"" or in ""R"" without depressing the accelerator pedal. No relevant errors are stored in the DME fault code memory, and these symptoms are no longer present once the engine is at operating temperature (> 90C). Unfavorable DME software"
• 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
• 10150324?SI B51 15 08 Body Equipment October 2012 Technical Service. This Service Information bulletin supersedes SI B51 15 08 dated July 2008. designates changes to this revision SUBJECT Rear Window False Anti-trap Activation. INFORMATION The anti-trap protection feature may be activated when no obstruction is present. This may occur at either one or both of the rear windows. The root cause of the false anti-trap activation may be difficult to determine. The attached diagnosis flowchart has been developed to assist with determining the actual root cause of the failure as well as to help prevent unnecessary part replacements. The root cause is typically either an issue with the window system, or an electrical/software issue. The diagnosis flowchart will help ensure that repairs are only carried out for the system that is most likely at fault. Refer to B511508_Attachment. PARTS INFORMATION Refer to the Electronic Parts Catalog (EPC) for the appropriate parts noted in the diagnostic flowchart. WARRANTY INFORMATION Not applicable.
• 10150265Intermittently Stored FM Radio Stations Default to FM 87.7. Intermittently, the stored FM radio stations default to FM 87.7 after vehicle start-up. CAUSE 1. Low battery voltage or voltage drop at the head unit 2. Radio station preset contains FM 87.7 3. Remote key memory not set correctly or the setting is lost
• 10150264"The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" 1. When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it. 2. The new part has incorrect coding."
• 10150224"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Electrochromic Mirror,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
• 10150221Brake Fluid Maintenance Service: 36-Month Interval. The CBS displays the first brake fluid service as a 36-month interval from the date of production instead of the appropriate 24-month interval.
• 10150218N51, N52K, N52T and N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine exhibits a loss of power; and the Service Engine Soon lamp is illuminated. One, or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2A7C - VANOS, inlet, cold start 2A82 - VANOS, intake, variable cam control test 2A7A - VANOS, exhaust, cold start 2A87 - VANOS, intake: control fault, camshaft sticking 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D54 - VANOS, exhaust, cold start: not controllable 2D55 - VANOS, intake, cold start: not controllable 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - Camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One, or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
• 10150174SI B51 55 10 November 2013 Body EquipmentTechnical Service This Service Information bulletin supersedes SI B51 55 10 dated December 2010. designates changes to this revision SUBJECT Rear Window Release Button Leaks Water.
• 10150173"Outside Door Mirror Moves when Locking or Unlocking the Vehicle. The door mirror tilts immediately after unlocking or locking. The mirror position does not correspond to the memory position preset by the customer. Pressing the seat memory button typically will return the mirror to the stored position. Poor electrical contacts of the mirror drive in the mirror housing INFORMATION The problem has been integrated into ISTA diagnostics. Complete the diagnosis test plan using the latest ISTA version. The test plan can be accessed via the following path: ""Information Search / Function Structure / Body / Mirror / Exterior mirrors / Driver's or passenger side / Exterior Mirror https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/15...12/6/2013 Page 2 of 2 Malfunction,"" and then press ""Start Search."" Select the test plan ""AM5102_00010."""
• 10150167Incorrect Remaining Service Life from CBS Data for Brake pads. The calculated remaining service life for the brake pads (front and/or rear axle) from the CBS data does not match the actual brake pad thickness. The customer notices implausible remaining distances (too high or too low) on the front and/or the rear axle brake system. Note: E9x vehicles with xDrive are not affected by this bulletin. Software calculation in the brake pad wear model
• 10150133In all audio modes (radio, CD, AUX-In, etc.), the audio output is distorted. It is more noticeable with high bass and high audio volume settings. There may also be an intermittent interference noise coming from the loudspeakers at low audio volume or when the radio is turned off. Audio settings in the RAD2+ (radio professional)
• 10150131"Enabling and Replacing New OC3 Seat Mat. The replacement OC3 seat mat (front passenger seat occupancy) will not enable when following ISTA Repair Instruction REP 65 77 604, ""Replacing sensor mat (OC3 mat) for passenger seat occupancy detector."" When the new mat is installed in the vehicle, too much pre-load pressure will prevent the mat from being enabled. ISTA/P WILL NOT enable the new part, and will cause permanent damage to it."
• 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
• 10150128Basic SVS: Voice Recognition Inoperative After Programming. After programming the vehicle with ISTA/P 2.48.x, the voice recognition (Basic SVS) is inoperative. NOTE: The Basic SVS only includes voice recognition for phone functions. Error in the coding data of ISTA/P 2.48.x The voice recognition function is unintentionally deactivated.
• 10150039"?Panoramic Sunroof Repair Instructions. INFORMATION Sunroof Repair Instructions: The panoramic sunroof contains several ""mechanism sets"" which can be repaired and/or replaced independently in the event of a mechanical failure. When performing such a repair to any of these sets, the TIS/ISTA Repair Instructions (REP) should always be consulted. Due to the complex nature of these repairs, a set of complementary instructions with additional detail, explanation, and photos has been developed. The attached Repair Instructions should always be used in conjunction with the TIS/ISTA REP. "
• 10150037Brake Fluid Maintenance Service: 36-Month Interval. The coding in these vehicles has the CBS displaying the first brake fluid service as a 36-month interval from the date of production, instead of the appropriate 24-month interval.
• 10150033N51, N52K, N52T and N55 Engine: Various Faults Stored in DME Related to VANOS and Camshaft Position. A rattling noise can be heard from the engine compartment; the engine exhibits a loss of power; and the Service Engine Soon lamp is illuminated. One, or more of the following faults may be stored. E70, E71, E82, E88, E90, E92 and E93: 2D5A - VANOS, intake: control fault, camshaft sticking 2D5B - VANOS, intake: control fault, position not reached 2D54 - VANOS, exhaust, cold start: not controllable 2D55 - VANOS, intake, cold start: not controllable 2D60 - VANOS, exhaust: control fault, camshaft sticking 2D61 - VANOS, exhaust: control fault, position not reached 2D9F - Camshaft input sensor: signal implausible 2DA1 - Camshaft exhaust sensor: signal implausible 300C - Camshaft input sensor: signal high 300D - Camshaft input sensor: signal low 300E - Camshaft exhaust sensor: signal high 300F - Camshaft exhaust sensor: signal low F07, F10, F12, F13 and F25: 130104 - VANOS, intake: control fault, camshaft sticking 130108 - VANOS, intake: control fault, position not reached 130304 - VANOS, exhaust: control fault, camshaft sticking 130308 - VANOS, exhaust: control fault, position not reached 130E11 - Camshaft input sensor: signal implausible 130F11 - Camshaft exhaust sensor: signal implausible 164020 - Camshaft input sensor: signal high 164021 - Camshaft input sensor: signal low 164030 - Camshaft exhaust sensor: signal high 164031 - Camshaft exhaust sensor: signal low CAUSE One, or both (intake and/or exhaust) of the VANOS gear assemblies have failed; the attaching bolts may have also loosened and/or broken.
• 10149613In all audio modes (radio, CD, AUX-In, etc.), the audio output is distorted. It is more noticeable with high bass and high audio volume settings. There may also be an intermittent interference noise coming from the loudspeakers at low audio volume or when the radio is turned off. Audio settings in the RAD2+ (radio professional)
• 10149603"Panoramic Sunroof Repair Instructions. INFORMATION Sunroof Repair Instructions: The panoramic sunroof contains several ""mechanism sets"" which can be repaired and/or replaced independently in the event of a mechanical failure. When performing such a repair to any of these sets, the TIS/ISTA Repair Instructions (REP) should always be consulted. Due to the complex nature of these repairs, a set of complementary instructions with additional detail, explanation, and photos has been developed. The attached Repair Instructions should always be used in conjunction with the TIS/ISTA REP. Refer to the following repair attachments: Front Glass Mechanism repair E53, E61, E70, E83, E91.pdf Rear Glass Mechanism repair E53, E61, E70, E83, E91.pdf Wind Deflector Mechanism repair E53, E61, E70, E83, E91.pdf Sunshade Mechanism repair E53, E61, E83.pdf Sunshade Mechanism repair E70, E91.pdf All panoramic roofs for the above-listed models are conceptually similar and utilize similar repairs. NOTE: An E83 (X3) sunroof cassette is used for demonstration of the repairs. Some differences may exist between this and other models. The following prerequisite work is required in order to replace the following kits (in addition to removing the cassette from the car and glass from the cassette): Front Glass Mechanism - None. Rear Glass Mechanism - Remove the front glass mechanism. Wind Deflector Mechanism - Remove the front glass mechanism; remove the rear glass mechanism. Sun shades and Shade Mechanism - None Sunroof Mechanical 3D Animation: A 3D animation has been developed in order to clarify how the sunroof mechanism operates, as well as how it is assembled and disassembled. To view this animation, open Interactive Career Pathways (ICP) and select ""Replace Front and Rear Glass Panel Mechanic"" from the Technical Service Information section of the home page. This animation allows you to: * Operate the mechanism and view from any angle; * Add or remove parts and then cycle the sunroof; * S
• 10149557For the above-referenced vehicles with driver?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment. This ?component-specific? customer support program applies only if there is a defect in materials or workmanship of the Takata driver?s side airbag module in a listed vehicle.
• 10149495"Roadside Assistance and BMW Online Services Inoperative After Programming. Roadside Assistance and BMW Online services are inoperative after programming the vehicle with ISTA/P 2.48 to 2.49.0. The symptoms are as follows: * BMW Online - No network available when selected * Roadside Assistance - When selected, a message stating ""Service not enabled or contract expired"" is displayed. Also, ""Start service"" is grayed out and cannot be selected. CAUSE Software error in the CIC (Car Information Computer)"

Every BMW 328XI model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.