2011 Chevrolet Cruze
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chevrolet › Cruze › 2011
These records cover every 2011 Chevrolet Cruze. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2011 Chevrolet Cruze. Newest first.
General Motors LLC (GM) is recalling certain model year 2016-2017 Buick Verano and 2016 Chevrolet Malibu as the electronic park lock lever may allow the ignition key to be removed without the transmission being in PARK. Also, certain 2013 Buick Encore, 2011 Buick Regal, 2013-2014 Buick Verano, 2011-2016 Chevrolet Cruze, 2010-2013 Chevrolet Equinox…
Risk and remedy
Risk
If the key is removed without the transmission in PARK, the vehicle may rollaway as occupants are exiting, increasing the risk of injury.
Remedy
GM will notify owners, and dealers will inspect and if necessary replace the key cylinder lock housing, free of charge. The recall began on October 14, 2016. Owners may contact Chevrolet customer service at 1-800-222-1020, Buick 1-800-521-7300, and GMC 1-800-462-8782. GM's number for this recall is 50490 and 50491.
General Motors (GM) is recalling certain model year 2011-2012 Chevrolet Cruze vehicles equipped with 1.4L DOHC gasoline turbo engines and 6T40 front wheel drive automatic transmissions and equipped with an electric vacuum pump to provide supplemental vacuum for brake assist, when needed. In the affected vehicles, the pump may not activate, resulting in an…
Risk and remedy
Risk
A loss of braking assistance will require extra pedal force and/or distance to bring the vehicle to a stop, increasing the risk of a crash.
Remedy
General Motors will notify owners, and dealers will replace a microswitch in the power brake vacuum pipe assembly, free of charge. The recall began on October 7, 2013. Owners may contact Chevrolet at 1-800-222-1020. GM's recall number is 12213.
General motors (gm) IS recalling certain model year 2011 and 2012 chevrolet cruze vehicles manufactured from october 2, 2009, through may 31, 2012. spilled or dripping oil (such as after an oil change) may collect in the engine shield (bellypan) near hot engine or exhaust system surfaces. as a result, the oil and the engine shield may ignite and burn.
Risk and remedy
Risk
Either condition could result in an engine compartment fire, possibly causing injury or death.
Remedy
Gm will notify owners, and dealers will modify the engine shield to prevent fluid from contacting the shield. also, on vehicles with a manual transmission, dealers will apply a protective tape to the electronic power steering wire harness. repairs will be performed free of charge to the owner. the safety recall began on july 10, 2012. owners may contact the chevrolet owner center at 1-866-694-6546.
General motors (gm) IS recalling certain model year 2011 and 2012 chevrolet cruze vehicles manufactured from october 2, 2009, through may 14, 2012. attachment welds for the fuel tank strap secondary brackets may have been omitted.
Risk and remedy
Risk
The fuel tank could come loose in a crash, possibly allowing fuel to leak from the tank. a fuel leak in the presence of an ignition source could result in a fire.
Remedy
Gm will notify owners, and dealers will inspect the vehicle for missing welds. if the vehicle IS missing welds, dealers will secure the bracket attachments with fasteners. repairs will be performed free of charge. the safety recall began on july 9, 2012. owners may contact the chevrolet owner center at 1-866-694-6546.
General motors IS recalling certain model year 2011 chevrolet cruze vehicles manufactured from october 2, 2009, through april 21, 2011. the bolt attaching the intermediate steering shaft to the steering gear input shaft may not have been properly installed.
Risk and remedy
Risk
This could allow the shafts to separate, resulting in the loss of steering. loss of steering control may increase the risk of a crash.
Remedy
Dealers will inspect, and if required, repair the intermediate shaft/steering gear assembly to assure the bolt IS fully seated and the shaft properly assembled. this service will be performed free of charge. The safety recall began on may 23, 2011. owners may contact chevrolet at 1-800-630-2438, or www.gmownercenter.com.
General motors IS recalling certain model year 2011 chevrolet cruze vehicles manufactured from october 6, 2009, through april 27, 2011 and equipped with an automatic transmission for failing to comply with federal motor vehicle safety standard no. 102, 'transmission shift lever sequence, starter interlock, and transmission braking effect,' and federal motor…
Risk and remedy
Risk
The driver may not be able to restart the vehicle and the vehicle could roll away after the driver has exited the vehicle, resulting in a possible crash without prior warning.
Remedy
Dealers will inspect the transmission shift linkage for correct installation and adjust the shift linkage system free of charge. the safety recall began on may 23, 2011. owners may contact chevrolet at 1-800-630-2438, or www.gmownercenter.com.
General motors IS recalling certain model year 2011 chevrolet cruze vehicles. during manufacturing the steering wheel could have been improperly fastened and may detach from the steering column.
Risk and remedy
Risk
Should the steering wheel detach from the steering column while driving, the driver could lose the ability to steer the vehicle, increasing the risk of a crash.
Remedy
Dealers will inspect to ensure that the steering wheel IS assembled properly. this service will be performed for you free of charge. The safety recall began on april 7, 2011. owners may contact chevrolet at 1-800-630-2438, or at the owner center at www.gmownercenter.com.
Owner complaints
733 complaints38 involved a crash20 involved a fire39 injuries2 deaths
What owners report most
Latest complaints
- Service brakes, hydraulic
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving approximately 55 - 60 MPH and attempting to depress the brake pedal, the brake pedal became stiff and pushed back, requiring three to four attempts to respond and causing an extended stopping distance. The contact stated…
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving approximately 55 - 60 MPH and attempting to depress the brake pedal, the brake pedal became stiff and pushed back, requiring three to four attempts to respond and causing an extended stopping distance. The contact stated that the failure had occurred while driving on several occasions. In addition, the check engine warning light was intermittently illuminated. The vehicle was taken to an independent mechanic, where it was determined that the microswitch inside the power brake vacuum pipe assembly had failed and needed to be replaced. The contact associated the failure with NHTSA Campaign Number: 13V360000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was notified of the failure by phone. The failure mileage was approximately 150,000.
- Vehicle speed control
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving at various speeds and raising the foot off the accelerator pedal, the vehicle decelerated drastically. Additionally, the vehicle occasionally hesitated while accelerating and failed to immediately accelerate while…
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving at various speeds and raising the foot off the accelerator pedal, the vehicle decelerated drastically. Additionally, the vehicle occasionally hesitated while accelerating and failed to immediately accelerate while depressing the accelerator pedal. Occasionally, the vehicle lurched forward suddenly. The cause of the failure was not yet determined. The dealer was notified of the failure, but no assistance was offered. The failure mileage was 129,000.
- Electrical system · Engine · Power train
i’m unsure if the person i bought this vehicle from had the codes wiped before selling to me, but there were NO lights on dash for 3 days after minimal driving only to work and back, then all of a sudden the check engine light came on, and in the info box it would pop up saying “service stability…
i’m unsure if the person i bought this vehicle from had the codes wiped before selling to me, but there were NO lights on dash for 3 days after minimal driving only to work and back, then all of a sudden the check engine light came on, and in the info box it would pop up saying “service stability system” - i took to o’reiley’s to see what it was for, apparently it was the ECM (electronic computer module) which essentially controls like everything. days go by i don’t do anything more about it and drive as usual to work, and it starts overheating, and smoking like crazy, but doesn’t say it’s hot on my dash, so i had no idea how hot it got or anything. i got to work, worked my shift, and went to put coolant in before returning home- just to find that it was full and i didn’t need to put any in. weird, right? ok well on my way home i’m going about 55mph on the highway and it suddenly just wouldn’t let me accelerate anymore and behaved as if i ran out of gas but i had over half a tank. when i came to a stop i turned the car off, and tried to turn it back on when it wouldn’t even turn over. i sat about 15 mins on the side of the highway before it actually started and i drove home. a week goes by, and now this ecm is effecting more and more- driving on the highway/streets it’s shifting really hard, immediately following that, my speedometer and rpm meter fall to “0” on the dash but the vehicle is still driving and the message pops up about the service stability system. i replaced my tire and now it’s telling me to service airbag system and the abs light is stuck on, as well as traction control and it’s just so weird. i just don’t feel safe in this car and after looking it up, apparently everyone with the make and model have very similar problems, but specifically searching by my VIN- apparently there’s no recalls and it’s just extremely frustrating and i don’t know what to do. if i fix the ECM will all these issues be resolved or will i waste $600-$800 replacing it?
- Engine · Unknown or other
I purchased my car in 2020 and have had this issue recently come up. I have coolant that is vanishing from my car but not dripping to the floor. I've learned since then that there was a recall on my car for my water pump which causes this exact issue which has caused a related check engine light to…
I purchased my car in 2020 and have had this issue recently come up. I have coolant that is vanishing from my car but not dripping to the floor. I've learned since then that there was a recall on my car for my water pump which causes this exact issue which has caused a related check engine light to appear. It seems unfair to me that there's a recall on my car that was taken away after one year despite it still not being replaced, and purchasing my car not knowing of this recall not being done and the window closing I feel should be rectified. I will be notifying GM about this matter as well. Thank you for your time and consideration on this matter
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2011 Chevrolet Cruze. It was discovered that there was a mileage discrepancy. The vehicle was a private in April 12th 2026. At the time of purchase, the vehicle mileage was 135,000 The contact stated that the next day when retrieving the title they noticed…
Odometer Fraud. The contact purchased a 2011 Chevrolet Cruze. It was discovered that there was a mileage discrepancy. The vehicle was a private in April 12th 2026. At the time of purchase, the vehicle mileage was 135,000 The contact stated that the next day when retrieving the title they noticed the mileage discrepancy. The contact spoke withe seller who then stated it was the same mileage they were told when they received the vehicle and had since replaced the engine therefore the engine mileage would not show at the DMV. The contact looked up the CarFax and saw the same mileage discrepancy with a mileage of over 300,000. When the contact took the vehicle to the dealer for an air bag recall, when the dealer confirmed mileage discrepancy. The contact sought out legal assistance.
- Electrical system · Engine · Power train
The primary failure is a total loss of engine power and electrical systems while the vehicle is in motion. The dealership (Ray Skillman Southside Mitsubishi) has diagnosed this as a failed engine/body control computer system. The vehicle is currently located at the dealership's service center and…
The primary failure is a total loss of engine power and electrical systems while the vehicle is in motion. The dealership (Ray Skillman Southside Mitsubishi) has diagnosed this as a failed engine/body control computer system. The vehicle is currently located at the dealership's service center and is available for inspection. The vehicle has stalled/shut off completely while driving on four separate occasions. This resulted in an immediate loss of power steering and motive power, nearly causing collisions in traffic. A vehicle that loses all power without warning is a severe safety hazard to the driver, passengers, and other motorists on the road. Yes. The problem has been confirmed by the Ray Skillman service department. They have attempted to repair the issue 3 times without success and currently state that the vehicle is inoperable while they search for a used replacement computer component. The vehicle has been inspected multiple times by the Ray Skillman dealership technicians. To date, no representative from the manufacturer (General Motors) or insurance has performed an independent inspection, though a formal complaint has been initiated with the dealership's corporate management. There were no consistent warning lamps or symptoms prior to the failures. The vehicle would unexpectedly lose all power and shut down. These symptoms first appeared within the first 100 miles of ownership (purchased at 11,000 miles; current mileage approximately 11,800 The dealership has refused to provide a loaner vehicle and is currently attempting to resolve a recurring safety failure using a used/salvage electronic component rather than a certified new part, which I believe further compromises the safety of the vehicle.
- Engine
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the traction control warning light was illuminated. The check engine warning…
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the traction control warning light was illuminated. The check engine warning light illuminated shortly after the vehicle was purchased. The contact stated that the vehicle was shaking erratically, and the engine was abnormally loud. In addition, the RPM was elevated. The contact stated that the vehicle lost motive power and the engine seized. The contact stated that while attempting to start the vehicle, the vehicle failed to start. The contact stated that there was electrical power to the vehicle; however, the engine failed to crank. The vehicle was towed back to the dealer where it was purchased, and diagnosed with a computer system failure. The contact was informed that the computer system needed to be replaced. In addition, the contact was informed that the computer system was being replaced with a used computer system. The vehicle was being repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 12,000.
- Engine
The vehicle continues to overheat. The fan has been changed, the thermostat has been changed, the coolant reservoir has been changed, the cadilatic converter has been changed. Still running over hot. We continue to check oil and coolant levels, making sure they are where they need to be. Occasionally smoking.
- Engine · Power train
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving 25-35 MPH, the vehicle failed to shift into the intended gear and then stalled. The contact was able to pull over to the side of the road. The vehicle failed to restart and was towed to the residence. There was no…
The contact owns a 2011 Chevrolet Cruze. The contact stated that while driving 25-35 MPH, the vehicle failed to shift into the intended gear and then stalled. The contact was able to pull over to the side of the road. The vehicle failed to restart and was towed to the residence. There was no warning light illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not notified of the failure. The failure mileage was approximately 230,000.
- Electrical system · Engine · Steering
When I start my vehicle and go over a certain speed it show service abs system it also makes a grinding sound when breaking before that speed is hit it also has a wobbleing steering wheel when breaking at high speeds also when accelerating it will sometimes show engine power reduced after presing the gas pedal
- Electrical system · Power train
The contact owns a 2011 Chevrolet Cruze. The contact stated that on two separate occasions while driving at undisclosed speeds, the vehicle shut off unintendedly and without warning. The contact stated that after restarting the vehicle, the vehicle operated normally. The vehicle was taken to the…
The contact owns a 2011 Chevrolet Cruze. The contact stated that on two separate occasions while driving at undisclosed speeds, the vehicle shut off unintendedly and without warning. The contact stated that after restarting the vehicle, the vehicle operated normally. The vehicle was taken to the local dealer, who was unable to determine the cause of the failure. The vehicle was not repaired. The manufacturer had not yet been contacted regarding the failure. The contact was informed that the VIN was not included in NHTSA Campaign Number: 16V502000 (ELECTRICAL SYSTEM, POWER TRAIN). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 129,000.
- Engine
The engine is leaking oil. There are clearly known issues with this engine such as oil leaks and engine fires. There was a previous recall on this issue that says complete but we are still having the same issue. The Chevrolet corporate office and dealerships do not want to take responsibility.
- Engine
The contact owns a 2011 Chevrolet Cruze. The contact stated while driving at an undisclosed speed, the RPM increased and there was a burning oil odor on the interior of the vehicle. No warning light was illuminated. The contact stopped and parked the vehicle. The contact performed an inspection…
The contact owns a 2011 Chevrolet Cruze. The contact stated while driving at an undisclosed speed, the RPM increased and there was a burning oil odor on the interior of the vehicle. No warning light was illuminated. The contact stopped and parked the vehicle. The contact performed an inspection under the hood and when the oil cap was removed, the contact noticed a whistling sound. The vehicle was taken to an independent mechanic where it was diagnosed with a failed intake manifold. The contact was informed that the intake manifold needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 67,000.
- Electrical system › Body control module/bcm
The contact owns a 2011 Chevrolet Cruze. The contact stated that the brake lights, power locks, and windshield wipers were inoperable. The contact stated that the ignition key failed to disengage after turning off the vehicle. The contact had to hold a button underneath the steering panel to be…
The contact owns a 2011 Chevrolet Cruze. The contact stated that the brake lights, power locks, and windshield wipers were inoperable. The contact stated that the ignition key failed to disengage after turning off the vehicle. The contact had to hold a button underneath the steering panel to be able to remove the key. The vehicle was taken to an independent mechanic where the contact was informed that the Body Control Module (BCM) needed to be replaced. The manufacturer was notified of the failure but offered no assistance. The contact was referred to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was approximately 130,000.
- Power train
Vehicle does not shift gears, jumpy, sluggish, disengages then jerks back into gear. Hazard when trying to pickup speed to accelerate into highway traffic. Does not engage in reverse gear at times, have to turn vehicle off, wait a few minutes then turn vehicle back on for reverse gear to engage.…
Vehicle does not shift gears, jumpy, sluggish, disengages then jerks back into gear. Hazard when trying to pickup speed to accelerate into highway traffic. Does not engage in reverse gear at times, have to turn vehicle off, wait a few minutes then turn vehicle back on for reverse gear to engage. Sometimes when vehicle is in park, vehicle will not start, have to fidget with gear and key, sometimes for several minutes before it will register in park and allow you to start the vehicle. When on highway transmission will jolt and jerk making you think you have lost your transmission on the roadway. This is a major hazard for my daughter who drives this vehicle to college. I am aware of a lift plate that can be installed to fix this problem that has existed in all 2011 Chevy Cruze s since they were manufactured. NHTSA Bulletin issued Oct. 10, 2024 NHTSA ID#11010651 Manufacture Communication #24-NA-223 Bulletin to all technicians for an alternative procedure for a lift plate that can be installed into the transmission to correct this problem. This needs to be a nationwide issued RECALL because of the endangerment people are being put in while driving these unsafe Chevy Cruze with faulty transmission issues.
- Air bags
I was hit side impact my airbags didn’t deploy in the car they deployed under the hood I was hit by a vehicle doing approximately 50 miles an hour the airbag that was supposed to go off went off under the hood instead of in the car
- Engine
Watery oil looking liquid making puddles under car. Orange fluid seen pooling from above. Head gasket blown?
- Engine
Losing coolant seems like blown head gasket
- Electrical system · Engine · Power train
While driving home on the interstate after work, I was travelling at around 65 miles per hour, with the cruise control set at that speed. In an instant I lost all engine power and began to slow down very rapidly. A quick look to the rearview mirror to ensure nothing was approaching the rear of my…
While driving home on the interstate after work, I was travelling at around 65 miles per hour, with the cruise control set at that speed. In an instant I lost all engine power and began to slow down very rapidly. A quick look to the rearview mirror to ensure nothing was approaching the rear of my vehicle, I found that I could see nothing except grey and white smoke behind me from all three mirrors. I was forced to remove myself from the highway for fear of causing an accident by blinding drivers with the smoke coming from my exhaust, and I was able to use the service road to get to the next fueling station. Upon arrival, I opened the hood and found that oil had sprayed out of every available portal in the engine, it exited through the vacuum lines, pressure sensors onto my alternator, saturated my serpentine belt as well as everything else ion the engine compartment. I noticed most of the oil came from a round hole behind the oil filler cap through a busted vacuum diaphragm that had blown out instead of regulating vacuum, indicating extreme positive pressure in the crankcase. As this was my MOS in the Army, I am experienced with dangers and risks involved in these situations, and I will give warning that if this happens during the right traffic situations, lives will be lost as a result of the smoke screen developimg when the oil hits the catalytic convertors combined with the rapid decline in speed without warning of any kind, and when it does happen, and it will, since there are 8 million of these vehicles on the road and counting, this complaint should serve as proper and fair warning od the damgers and risks with allowing this engine to remain in use without a warning system to indicate the tiny plastic check valve has been released from its position. I was fortunate enough that I only suffered a few curse words and horns blowing and flipping me the bird, but i have to admit I was afraid for my life and someone with less driving experience will have a bad outcom
- Engine and engine cooling
The contact owns a 2011 Chevrolet Cruz. The contact stated while driving at an undisclosed speed, the temperature gauge indicated that the engine was hot (H). Upon checking the coolant level, the contact discovered that the coolant reservoir was empty. The contact refilled the coolant reservoir…
The contact owns a 2011 Chevrolet Cruz. The contact stated while driving at an undisclosed speed, the temperature gauge indicated that the engine was hot (H). Upon checking the coolant level, the contact discovered that the coolant reservoir was empty. The contact refilled the coolant reservoir; however, the failure returned, and the coolant immediately leaked out of the vehicle. The contact refilled the coolant reservoir a second time and drove to an independent mechanic. A diagnostic test was performed that showed that a cracked tube under the coolant had caused a gasket to blow, leading to the coolant leak. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 96,000.
- Engine
The main seal
- Power train
The contact owns a 2011 Chevrolet Cruze. The contact stated while attempting to leave a parking lot, the gear shifter was shifted to drive but the transmission remained in reverse. The vehicle was towed to an independent mechanic where it was diagnosed with transmission failure. The contact was…
The contact owns a 2011 Chevrolet Cruze. The contact stated while attempting to leave a parking lot, the gear shifter was shifted to drive but the transmission remained in reverse. The vehicle was towed to an independent mechanic where it was diagnosed with transmission failure. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The dealer was not contacted. The manufacturer was not notified of the failure. The failure mileage was approximately 130,000. The VIN was not available.
- Engine
Since I’ve brought the car there is always an issue with the car overheating and something with the cooling system that needs to be repaired. It happens frequently and I’ve spent more in repairs than what I paid for the car. It’s always something with the coolant system that causes it to overheat which is dangerous.
- Service brakes
I bought my car used. I have replaced the Brake Pedal Position Sensor 3 times on my own and 1 time by Anderson General Tire. Sometimes when I go to brake, there is no brake and I have to push real hard with my foot and finally the car will brake. It feels as if my brakes go out and sometimes I…
I bought my car used. I have replaced the Brake Pedal Position Sensor 3 times on my own and 1 time by Anderson General Tire. Sometimes when I go to brake, there is no brake and I have to push real hard with my foot and finally the car will brake. It feels as if my brakes go out and sometimes I have to pump the brake pedal. It happens also when I start my car after it's been sitting and I brake to shift into drive. My car says it doesn't have any recalls but I have been having this problem. My car has been serviced numerous times by Chevrolet immediately after buying it. I only had to stop taking it there because my warranty ran out and then they wouldn't cover the costs anymore. Codes that come up are P057D and U0140-71: Brake Pedal Position Sensor Circuit High and Brake Pedal Position Sensor Circuit High Voltage and Anti-lock Brake System (although this does not show on the dash).
- Electrical system
2011 Chevrolet Cruze. 1.4 engine. Manual transmission. No accidents. Mileage: 69,000 The engine has stopped while driving 3 times in last year (2023) January (5 degrees), Sept and November. Battery is 2 years old. Replaced negative battery cable with (OEM), after 2nd engine stop, after reading…
2011 Chevrolet Cruze. 1.4 engine. Manual transmission. No accidents. Mileage: 69,000 The engine has stopped while driving 3 times in last year (2023) January (5 degrees), Sept and November. Battery is 2 years old. Replaced negative battery cable with (OEM), after 2nd engine stop, after reading that negative cables have history of going bad over time. Very dangerous, especially in dark. All lights, head lights, dash lights and engine stop. Emergency flashers work. I coast to the side of road, and try to restart. It will restart after about 5 minutes. I have gotten a check air bag message on dash. First, two times I took to a mechanic and they said there are no repair codes coming up from computer.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Chapman Chevrolet / Cruze Engine Recall
NHTSA opened AQ12-002 to determine whether Chapman Chevrolet of Philadelphia, Pennsylvania complied with the requirements of the National Traffic and Motor Vehicle Safety Act, 49 U.S.C.Chapter 301 (Safety Act) and its implementing regulations.The Safety Act requires, among other things, that a manufacturer notify its…
NHTSA opened AQ12-002 to determine whether Chapman Chevrolet of Philadelphia, Pennsylvania complied with the requirements of the National Traffic and Motor Vehicle Safety Act, 49 U.S.C.Chapter 301 (Safety Act) and its implementing regulations.The Safety Act requires, among other things, that a manufacturer notify its dealers of defects related to motor vehicle safety and non-compliances with Federal Motor Vehicle Safety Standards and, in turn, that a dealer not sell a new vehicle subject to a recall unless the recall remedy has been performed (49 U.S.C. ? 30120(i)). NHTSA issued an information request (IR) letter to Chapman Chevrolet on October 16, 2012.Chapman Chevrolet responded to this request on November 8, 2012.To gather additional information, NHTSA mailed an IR letter to General Motors LLC (GM) on February 25, 2013.GM responded to this request on April 1, 2013.NHTSA then issued a second IR letter to Chapman Chevrolet on July 2, 2013.Chapman Chevrolet supplied their response on July 30, 2013. NHTSA?s investigation indicated that Chapman Chevrolet sold and delivered 23 recalled vehicles that did not have the recall remedy completed at the time the vehicles were delivered to the customers.NHTSA therefore concluded that Chapman Chevrolet was liable for civil penalties for violations of the Safety Act, pursuant to 49 U.S.C. ? 30165.Under a Settlement Agreement dated October 1, 2014, Chapman Chevrolet paid compromised civil penalties in the amount of $50,000.This Audit Query is closed.
- Engine compartment fire
In a June 21, 2012 letter to NHTSA, General Motors LLC. (GM) submitted a Defect Information Report (DIR) identifying a defect in approximately 413,148 model year (MY) 2011 through 2012 Chevrolet Cruze vehicles manufactured from October 2, 2009 through May 31, 2012 (Recall 12V-288). According to GM, engine oil change…
In a June 21, 2012 letter to NHTSA, General Motors LLC. (GM) submitted a Defect Information Report (DIR) identifying a defect in approximately 413,148 model year (MY) 2011 through 2012 Chevrolet Cruze vehicles manufactured from October 2, 2009 through May 31, 2012 (Recall 12V-288). According to GM, engine oil change procedures can result in spilling or dripping of oil on the engine shield.Also, manual transmission vehicles with a completely worn clutch may cause hydraulic fluid to be expelled from the clutch housing vent hole.If oil, debris or the burning hydraulic fluid contacts hot engine or exhaust system surfaces, and the engine shield, the shield may ignite and burn, leading to a possible engine compartment or vehicle fire.GM and its engine shield supplier, Hanwha, modified the engine shield to address factors that may contribute to engine compartment fire. The redesigned shields were completely implemented in production vehicles by June 2012.The Office of Defects Investigation (ODI) analyzed complaint data provided by GM as well as complaints submitted to ODI from consumers. In total, there were 25 unique Chevrolet Cruze reports indicating hot surface ignition due to engine oil or hydraulic fluid contacting hot manifold, exhaust surfaces and the engine shield.Four additional fires were identified that resulted from other or unknown causes, including 1 attributed to a missing oil filler cap.Three fires of unknown cause all involved vehicles equipped with 1.4L L4 turbocharged engines.ODI will continue to monitor field experience in Cruze vehicles equipped with that engine.Owners of the recalled vehicles are notified to take their vehicle to a GM dealer, who will modify the engine shield to prevent oil fluids from contacting the shield.Also, on vehicles with a manual transmission, dealers are to apply a protective tape to the electronic power steering wire harness to prevent any incidents related to this issue. This preliminary evaluation is closed.The ODI reports cited above can be viewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers (ODI Nos.): 10456338, 10453754, 10450556, 10446718.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011805This Preliminary information communicates a GM part number forreflective high temperature heat or insulating tape when repairing wiring harnesses.
- 11011782This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
- 11011709This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
- 11011444This Preliminary information communicates to the dealer a process for accessing the procedure to add attachments to a GM technical assistance case using the dealer case management tool.
- 11011205This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules.
- 11010651This service bulletin informs the technician of an alternate lift procedure that has been developed when the lift plate does not fit the top of the transmission case for 6T30, 6T35, 6T40, 6T45, and 6T50 Transmissions.
- 11010545This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S).
- 11010491This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
- 11010490This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
- 11010421This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
- 11009764This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 11009756This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
- 11009532This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
- 11009531This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
- 11009156This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
- 11009088This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
- 11009039This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
- 11008956This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
- 11008906This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 11008898The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect.
- 11007936This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
- 11007935This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
- 11007744This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 11007743This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 11007208This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
- 11007196This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
- 11007121This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
- 11007116This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
- 11007115This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
- 11007095This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
- 11007091This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
- 11006849This service bulletin provides information on regular inspection of the Seat Belt Lap Anchor.
- 11006682This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
- 11006670This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
- 11006644This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11006511This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
- 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
- 11006376This service bulletin provides a procedure to replace the intake manifold if diagnostics has found the Non Return Valve missing to correct customer concerns of possible oil consumption and//or leaks.
- 11006278This service bulletin describes the U.S. Dealer Special Tool Loan Program process.
Every Chevrolet Cruze model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.