1991 Chevrolet P3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Chevrolet › P3 › 1991
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1991 Chevrolet P3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
4 recalls name the 1991 Chevrolet P3. Newest first.
The 19.5 x 6 front steel wheel disc cracks outside the mounting bolt circle and ends at the hub's diameter.
If the cracking goes unnoticed, the center portion of thedisc will crack completely and eventually the rim portion of the wheel couldseparate from the center section which could result in a vehicle crash.
Replace all six (seven if there IS a spare) defective wheels with newly designed wheels.
Some chassis were shipped to body builders with damaged fill or vent opening caps on the right-hand side. If a left-hand fill system was installed on the tank, and there was a damaged right-hand cap, the fuel system would not be sealed.
If the fuel system IS not sealed, the automatic shut-offsystem used in gas stations would not work, allowing gas to be forced out ofthe defective right-hand opening. The spilled gasoline would result in a firehazard if exposed to a source of ignition.
Install new caps on the vehicles with unused right-hand fill or vent openings.
The automatic apply transmission mounted parking brake lever pivot bolt "finger" may be loose.
The loose pivot bolt could allow the parking brakes torelease after they have been set manually; if the bolt falls off when theautomatic apply parking brake IS set, there IS insufficient braking to hold thevehicle if it IS parked on an incline. Both of these conditions could result invehicle movement without prior warning and possibly in an accident.
Torque pivot bolt to specifications.
Brakes may have missing rear axle outer bearing retaining ring and or greater than specified bearing end play. Either condition allows the rotor and hub assembly to shift position relative to the spindle. This movement can cause brake caliper piston recede farther than normal into the piston bore which would require greater than normal brake fluid…
This condition leads to increased stopping distance, andshould minimum stopping distance be required, it could result in an accidentwithout warning.
Replace both rear axle hubs.
Teams chevrolet 90c51/91v123. Owner awaits repair, it has been one month. Zone states we have nothing to do with schedule appointments. *ak
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.