1999 Chevrolet W4

Owner complaints

What owners report most

1. Fuel system, gasoline1
2. Unknown or other1

Latest complaints

• Jun 12, 2000CA
  Fuel system, gasoline › Fuel injection system · Unknown or other

  Engine check light kept coming on. dealers have expected it to be the sequential central part of fuel injection valve. vehicle ran rough, and was hard to start. *ak

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10248444Vehicle Recalls
• 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
• 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10190934Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
• 10190933Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
• 10190932Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
• 10190931Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
• 10082506This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
• 10019186Ipc, interior lights and/or headlamps flicker. FB2
• 628925Some owners may experience a service engine soon light, misfire, rough idle orhard start due to a deposit build-up on the sequential central port fuel inujector (scpi) poppet valve(s).
• 619002Some vehicles may experience a service engine soon light, misfire, rough idle or hard start due to a deposit build-up on the sequential central port fuel injector (scpi) poppet valve(s).
• 617636Some owners of 1996 - 1999 s/t, M/L, c/k, g, p and W4 trucks may experience a service engine soon light, misfire, rough idle or hard start due to a deposit build-up on the sequential central port fuel injector (scpi) poppet valve(s).
• 617575Some owners of 1996 - 1998 model year s/t, M/L, c/k, g, p and W4 trucks, that are registered in california, equipped with 4.3L, 5.0L or 5.7L engine, and california emissions, may experience a service engine soon light, misfire, rough idle or hard start due to a deposit build-up on the sequential central port fuel injector (scpi) poppet valve(s).
• 616390Service engine soon light, misfire, rough idle, or hard start due to a deposit build-up on the sequential central port fuel injector (scpi) poppet valve(s). The deposit build-up may cause injector poppets to stick closed.
• 615101Customer satisfaction campaign involving fuel injection pump timing gear fracture.
• 613602Some owners may experience a service engine soon light, misfire, rough idle or hard start. **Mr
• 602643Vehicles exhibit a condition in which the injection pump gear may contain a maching burr on the gear surface.

Every Chevrolet W4 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.