2005 Chrysler 300 AWD
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Chrysler › 300 AWD › 2005
These records cover every 2005 Chrysler 300 AWD. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
12 complaints1 involved a crash1 injuries
What owners report most
Latest complaints
- Power train · Unknown or other
The vehicle stalled while driving rendering it uncontrollable and with no power on the highway with speeds of 55 and over without warning. The vehicle has not started since the onset of the issue. After many costly repairs, my mechanic has labelled the issue as a bad/malfunctioning powertrain…
The vehicle stalled while driving rendering it uncontrollable and with no power on the highway with speeds of 55 and over without warning. The vehicle has not started since the onset of the issue. After many costly repairs, my mechanic has labelled the issue as a bad/malfunctioning powertrain control module. The fuel pump, sending unit, and crank sensor have been replaced with no change. This IS a common issue for this specific model. It has not started since november of last year.
- Electrical system · Electronic stability control (esc) · Vehicle speed control
Vehicle had a delayed start. While in motion the car would deaccelerate, slow down, and misfire. The esp/abs indicator light would come on and an alert would continue to sound until the car was shut off. The car may or may not start and when started it continues to alert the next day. The car…
Vehicle had a delayed start. While in motion the car would deaccelerate, slow down, and misfire. The esp/abs indicator light would come on and an alert would continue to sound until the car was shut off. The car may or may not start and when started it continues to alert the next day. The car continues to misfire and driving over 30 mph IS unsafe. The car has been taken to a mechanic several times but has never been properly fixed.
- Power train
I was leaving work and started my cay and went to put it in reverse and nothing happen. it would not come out of park. the gear was locked in park . I called a tow truck, and the tow truck driver informed me that there has been a recall on the gear shift for chrysler 300S .i call the chrysler…
I was leaving work and started my cay and went to put it in reverse and nothing happen. it would not come out of park. the gear was locked in park . I called a tow truck, and the tow truck driver informed me that there has been a recall on the gear shift for chrysler 300S .i call the chrysler dealership and they told me that "yes there has been a recall on that particular part, but not on my year vehicle. I don't understand why not my year model. if its a problem in other year model, then it makes sense that it can happen to any year model 300. there are other people out there who this has happened to unexpected, and I don't feel the dealership IS being fair to people who have the 2005 300 AWD model. please look into this. thank you so much. *tr
- Electrical system · Engine
Vehicle's engine shut off while driving like the key would be pulled out, would not start right away, some times would not start at all before a trip. It happens daily and after going to 3 mechanics and 1 chrysler dealership the issue cannot be identified. No codes are stored and therefore they…
Vehicle's engine shut off while driving like the key would be pulled out, would not start right away, some times would not start at all before a trip. It happens daily and after going to 3 mechanics and 1 chrysler dealership the issue cannot be identified. No codes are stored and therefore they said it's working fine. Do I need to get into an accident before this problem IS addressed? I know about many people having the same issue with the same unidentified error. They have this problem with the new models and they should start checking the old one as well. It IS definitely an ignition problem as the car can be started by bypassing the key switch. *tr
- Air bags
Airbags light keeps coming on and chiming. *tr
- Power train
I was driving as usual, went to my grandmothers house. Stayed about 20 minutes. When I left I started the car, went to put it in gear and nothing . It would not come out of gear. I had it towed monday and the tow truck driver informed me there had been a recall in the gear shift on other year…
I was driving as usual, went to my grandmothers house. Stayed about 20 minutes. When I left I started the car, went to put it in gear and nothing . It would not come out of gear. I had it towed monday and the tow truck driver informed me there had been a recall in the gear shift on other year chrysler 300. I called a chrysler dealership and they told me that yes it had been a recall on that particular part but not on my yr vehicle which IS a 2005. if its a problem in other yr 300'S then why not mine. Obviously it can happen to any year if its already had a recall on other year and the same car. They need to do a recall on all. I looked it up and there were alot of people who this has happened to and unexpected. My mechanic said when he took out the part, springs and pieces fell out the open part in the bottom of the part that he removed. I was told to save my receipt and if they do decide to recall, I can get a refund. *tr
- Power train › Automatic transmission
I was driving down the street when the car slowed down even though the rpm's went up as I tried to accelerate. I brought the car in and the valve pump in the transmission was replace. one week later the car failed again in the same manner. the second time I had to have the transmission replaced.…
I was driving down the street when the car slowed down even though the rpm's went up as I tried to accelerate. I brought the car in and the valve pump in the transmission was replace. one week later the car failed again in the same manner. the second time I had to have the transmission replaced. had the traffic been different or someone with less experience been driving, it could have easily resulted in a fatality or injury. there was no way a driver could avoid an accident from the rear at that point. *Tr
- Wheels
During a routine tire rotation I was advised that the seal between the tire and wheel was failing on all 4 wheels as a result of corrosion occurring on the mag type wheel. The failure was temporarily repaired by sanding the wheel and resealing. Comment was made that there IS no guarantee that the…
During a routine tire rotation I was advised that the seal between the tire and wheel was failing on all 4 wheels as a result of corrosion occurring on the mag type wheel. The failure was temporarily repaired by sanding the wheel and resealing. Comment was made that there IS no guarantee that the problem IS solved. It IS likely this will continue to occur as due to brine solution and road salt used during the winter months. The person doing the rotation stated this IS a common occurrence on this vehicle with this type of wheel. *Tr
- Suspension
Front right wheel makes loud banging sound. Started when the car had about 70,000 miles on it. Then came a horrible squeaking sound. This occurs constantly when driving and especially when turning the wheel. I replaced the lower control arm bushing in june. They were completley gone and made the wheels have a lot of play . The noise went away for about 3 months and IS now back louder than ever. *Tr
- Service brakes, hydraulic
2005 chrysler 300 c has warp front rotors. I have done some research on the net and am finding out that this IS not a single case. The auto parts store rep stated to me that he had several people order new rotors. *tr
- Engine and engine cooling › Cooling system › Fan · Steering › Column · Steering › Rack and pinion › Rack · Suspension › Rear
Major vibration in right front wheel, turns out I was almost killed, thankfully I pulled over the rack/pinion assembly broke! That was an over the weekend project for dealership. Luckily covered under warranty! Now I have a binding noise in steering column, at the hook joint inside the boot…
Major vibration in right front wheel, turns out I was almost killed, thankfully I pulled over the rack/pinion assembly broke! That was an over the weekend project for dealership. Luckily covered under warranty! Now I have a binding noise in steering column, at the hook joint inside the boot covering joint, dealer greased, but noise IS back, feels like column IS going to snap! They won't look at without a charge! Also have rattle in dash, knocking in brakes! I'm really sorry I purchased the vehicle, now I know why I got such a great deal! They just wanted to unload!!!!!concerned for my life!!!while driving my 300!!!!!!!!!!!!seriously,i do want to see my children's weddings!!!!! *tr
- Exterior lighting
Headlights will intermittently malfunction while driving. sometimes one headlight will go out, sometimes both will go out. the dealer IS telling me that the headlight assembly needs to be replaced for both lights. many other owners with the hid headlight option are experiencing the same issue. randomly losing headlights IS definitely dangerous! *tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10229178Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221515Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
- 10221512Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10220840Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220489Valve Body. These may cause over drive cycling.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 1021645482212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10191460Valve Body. These may cause over drive cycling.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10130081Return: Wiring Assy - Engine You have been identified as either having stock, or have stock in transit to your dealership. Please return stock packaged before 2016/07/31 (31 July, 2016)of follow ing part numbers:68176457AF, 68176459AF. Please return suspect parts back to your facing depot using Return Code 02, before 13 September, 2016.
- 1013008005182535AD - Lamp Assy ?Tail Light LT You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05182535AD . See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
- 10130079Inspect and Return: Trim Cover Assy - A-Pillar Rt/Lt You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part numbers: 1ZA04DX9AE, 1ZA05DX9AE. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
- 10129047Warranty Operations Newsletter Updates from Warranty Operations
- 10129046Warranty Operations Newsletter Updates from Warranty Operations
- 10129045CBXDP361AA Return: Spacer Kit - Visor You have been identified as either having stock, or have stock in transit to your dealership. Please return stock of part number CBXDP361AA. Replacement part number is CBXDP361AB w hich is in stock and available for order. Please return suspect parts back to your facing depot using Return Code 02, before 16 September, 2016.
- 101290441NT30XDVAC - Inspect and Return: Panel - Instrument Panel You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 1N T30XDVAC. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
- 10129043Inspect and Return: Solenoid Module - Transmission You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of follow ing part numbers:52120000AA, 52119435AF, 05078709AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
- 10129042Return: Lamp Assy - CHMSL& Cargo Light You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of follow ing part numbers:55372082AE, 55372082AD, 55372082AC, 55372082AB, 55372082AA. Replacement part number is 55372082AF w hich is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
- 10129041P/N CBSZR068AA: Inspect & Return: Module Kit - Occupant Restraint You have been identified as either having stock, or have stock in transit to your dealership. Please return part number CBSZR068AA as per the QIR attached. Replacement part can be obtained by ordering the same part number (CBSZR068AA) Please return suspect parts back to your facing depot using Return Code 02, before 02 September, 2016.
- 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
- 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
- 10121832Wiper If Mopar OE wipers are unavailable, the below alternatives can be offered instead. 05066964A$ = WBRW0011A$ 05066973A$ = WB000019A$ or WBF00019A$ 05096134A$ = WB000027A$ or WBF00028A$ 55154762A$ = WB000013A$ 68001330A$ = WB000019A$ or WBF00019A$ 05012611A$ = WB000021A$ or WBF00021A$ 05102881A$ = WBRW0011A$
Every Chrysler 300 AWD model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.