2006 Chrysler Crossfire

Owner complaints

What owners report most

1. Structure23
2. Visibility13
3. Visibility/wiper10
4. Unknown or other7
5. Exterior lighting3
6. Electrical system1
7. Vehicle speed control1
8. Engine1

Latest complaints

• Sep 1, 2020TN51,000 mi
  Structure › Body

  The rear glass window falls out of the convertible roof and into the passenger compartment. This IS chronic with most crossfire roadsters. Easily investigated and verified. It can happen while moving or standing still.

• Nov 7, 2019CA120,000 mi
  Unknown or other

  I have a 2006 chrysler crossfire back window became detached from the canvas. I was driving and all of a sudden just completely fell out.

• Apr 24, 2019TN57,000 mi
  Engine · Exterior lighting · Vehicle speed control
  I was driving the crossfire one evening and it shut off in the middle of the street, I almost got rear ended. All of a sudden the engine shut off, the exterior and interior lights went off as well. the car rolled to a stop blocking all the traffic behind me. I tried to restart the engine and…

  I was driving the crossfire one evening and it shut off in the middle of the street, I almost got rear ended. All of a sudden the engine shut off, the exterior and interior lights went off as well. the car rolled to a stop blocking all the traffic behind me. I tried to restart the engine and nothing happened, I had to have the car jump started, which took several attempts. I had no problems or indications that anything was wrong till this happened. mechanics have put in a new battery, a crank position sensor, and a cam position sensor on the car. It started once after that, ran for a few minutes then stopped. After that it won't start, even when being jumped. Trying to get a ecm from the dealer. Dealer said the cost IS $2,700.00, and orders are pending until july 1, 2019 because of supplier change. Plus there IS a flashing charge of $147.00 to reset this item for the car. Other internet users have reported having their cars suddenly stop running when driving on the highways also.

• Jun 1, 2018MI7,000 mi
  Structure › Body › Roof and pillars · Visibility › Glass, side/rear
  TL* the contact owns a 2006 chrysler crossfire. While driving approximately 55 mph, the rear glass window separated from the convertible roof top and fell inside the cabin of the vehicle. The vehicle was taken to szott M-59 dodge llc (2565 e. Highland rd. Highland charter twp, mi) where it was…

  TL* the contact owns a 2006 chrysler crossfire. While driving approximately 55 mph, the rear glass window separated from the convertible roof top and fell inside the cabin of the vehicle. The vehicle was taken to szott M-59 dodge llc (2565 e. Highland rd. Highland charter twp, mi) where it was diagnosed that the convertible roof top would need to be replaced. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 7,000. *Ln

• Sep 23, 2017KY18,341 mi
  Visibility/wiper

  Car IS stationary and the rear window IS separating from the convertible top

• Jul 31, 2017SC
  Structure › Body
  The back window of the crossfire has separated from the top. We saw this while we were walking around it in garage. I have called chrysler and they say there IS nothing they can do. We bought this car in 2008 and IS kept in a garage. I only have 53000 miles on it. I know they have a problem with…

  The back window of the crossfire has separated from the top. We saw this while we were walking around it in garage. I have called chrysler and they say there IS nothing they can do. We bought this car in 2008 and IS kept in a garage. I only have 53000 miles on it. I know they have a problem with the windows falling out because they a fixing them in 2005 models but not the 2006 models. IS there any thing I can do because a replacement top IS very expensive. We have had the window resealed twice and it will not hold.

• Jun 1, 2017NC
  Visibility/wiper

  The vehicle's rear window IS separating from the convertible top and I am afraid that it will fly off while I'm driving on the highway and kill someone behind me. I noticed the issue while it was parked in my driveway. Chrysler IS well aware of this issue with the 2005 models and IS not covering any repair of any other years, yet hundreds of people with cars from each year have complaints on many internet forums.

• Mar 8, 2017FL22,000 mi
  Visibility/wiper

  Back window fell off the convertible top. I see this IS the same issue with 2005 (which was repaired/recall by the mfg). Dealer said it was up to me to repair, had to ship the top to california for a complete new top (~ $3K). I live in florida. Don't understand how a back window falling off a moving car IS not a safety issue. Only ~ 22K miles.

• Aug 10, 2016MO82,000 mi
  Structure › Body · Unknown or other
  I own a 2006 chrysler crossfire. my back window IS falling out and it seems that chrysler does not want to take ownership of the faulty adhesive and faulty workmanship of the convertible top. I cannot drive my car because the glass will come out and result in hitting another vehicle, pedestrian…

  I own a 2006 chrysler crossfire. my back window IS falling out and it seems that chrysler does not want to take ownership of the faulty adhesive and faulty workmanship of the convertible top. I cannot drive my car because the glass will come out and result in hitting another vehicle, pedestrian or other object. this problem has left thousands of crossfire owners in a bad situation. chrysler did issue a recall on the 2005's under tsb 23-035-11reva but not for any other model years. state farm insurance informed me the same top/manufacturer/adhesive IS used on all crossfire model years therefore it IS not covered under an insurance claim. I've driven my car 3 times since noticing the window and the problem continues to get worse; becoming more and more of a safety issue. I want to know when chrysler will be held responsible for the replacement of all of the faulty equipment they marketed and sold to trusting consumer. I am asking the nhtsa to force the recall on all crossfire convertible tops, no matter what year they were manufactured or where they shipped. faulty equipment IS faulty equipment and the problem needs to rectified by the manufacturer. I am asking for the help from the nhtsa - there are many complaints - this IS obviously not an isolated case. until then, my car IS not able to be driven.

• Jun 30, 2016NC73,000 mi
  Unknown or other
  Window glass IS separating from the fabric convertible top. I noted this last month with the car sitting at my house. This car IS always garaged and has only around 73K miles, one owner. I have been told the rear window IS heat sealed to the cover. Only the top portion remains sealed, the sides and…

  Window glass IS separating from the fabric convertible top. I noted this last month with the car sitting at my house. This car IS always garaged and has only around 73K miles, one owner. I have been told the rear window IS heat sealed to the cover. Only the top portion remains sealed, the sides and bottom have separated. I have been working with a chrysler case worker for a month trying to get the company to repair or replace the top but only get emails about once a week requesting the same information I have already provided. I have been told my local chrysler dealership IS no longer a "qualified dealership" with no further explanation. I have asked for a personal phone call but to no avail at this point. This IS a definite safety hazard and I want the company to step up and fix it.

• Jan 12, 2016NC
  Structure · Visibility

  TL* the contact owns a 2006 chrysler crossfire. The contact stated that the rear window was separating from the convertible top. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was unknown. updated 04/21/2016*lj

• Sep 25, 2015MO34,590 mi
  Structure › Body · Unknown or other
  The rear window of the convertible top IS falling out. This IS a very common problem with this vehicle. My vehicle was built in october 2005, but IS considered a 2006 model. Chrysler tsb 23-035-11 rev a covers the problem for 2005 models. This common problem effects more than 2005 vehicles. On…

  The rear window of the convertible top IS falling out. This IS a very common problem with this vehicle. My vehicle was built in october 2005, but IS considered a 2006 model. Chrysler tsb 23-035-11 rev a covers the problem for 2005 models. This common problem effects more than 2005 vehicles. On 9-11-2015 chrysler was contacted (case # 27856344). They denied responsibility. Claimed (1) tsa only applied to vehicles in southern states (i provided them with a repair order from westbury chrysler in westbury, new york that applied the tsb & provided no charge replacement top. New york IS not a southern state); (2) tsa only applied to 2005 vehicles (i provided them information where tsb had been applied to a 2008 vehicle). This vehicle IS garaged most days and has only 34,590 miles. This safety problem IS due to a manufacturing problem that manufacture IS trying to avoid. vehicle IS in st. Louis, mo

• Sep 21, 2015MO34,590 mi
  Unknown or other
  The rear window of the convertible top IS falling out. this IS a very common problem with this vehicle. my vehicle was built in october 2005, but IS considered a 2006 model. chrysler tsb 23-035-11 rev a covers the problem for 2005 models. this common problem effects more than 2005 vehicles. On…

  The rear window of the convertible top IS falling out. this IS a very common problem with this vehicle. my vehicle was built in october 2005, but IS considered a 2006 model. chrysler tsb 23-035-11 rev a covers the problem for 2005 models. this common problem effects more than 2005 vehicles. On 9-11-2015 chrysler was contacted (case # 27856344). They denied responsibility. claimed (1) tsa only applied to vehicles in southern states (i provided them with a repair order from westbury chrysler in westbury, new york that applied the tsb & provided no charge replacement top. New york IS not a southern state); (2) tsa only applied to 2005 vehicles (i provided them information where tsb had been applied to a 2008 vehicle). this vehicle IS garaged most days and has only 34,590 miles. this safety problem IS due to a manufacturing problem that manufacture IS trying to avoid.

• Aug 31, 2015NC33,000 mi
  Structure › Body · Unknown or other
  Rear glass window adhesive failed and wndow IS falling out. Glass window on convertable roof IS separating from vinal. The window will eventially fall out completely causing unsafe conditions. Called chrysler and was told no warranty or recall and that whole convertable top would need to be…

  Rear glass window adhesive failed and wndow IS falling out. Glass window on convertable roof IS separating from vinal. The window will eventially fall out completely causing unsafe conditions. Called chrysler and was told no warranty or recall and that whole convertable top would need to be replaced for approx $2000. the car IS always in a garage and has very few miles. this IS obviously a poor design. window could fall out and cause severe damage or accident.

• Jul 24, 2015PA
  Visibility/wiper
  TL* the contact owns a 2006 chrysler crossfire. The contact stated that one of the rear windows would not remain in a secure position due to the adhesive. During rainy weather conditions, water entered the vehicle. The contact mentioned that the failure initially began at the corner and progressed.…

  TL* the contact owns a 2006 chrysler crossfire. The contact stated that one of the rear windows would not remain in a secure position due to the adhesive. During rainy weather conditions, water entered the vehicle. The contact mentioned that the failure initially began at the corner and progressed. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage and vin were unavailable.

• May 13, 2015FL40,000 mi
  Visibility › Glass, side/rear
  TL* the contact owns a 2006 chrysler crossfire. The contact stated that rear windshield fell out of the vehicle. As a result, the roof liner on the top rear of the vehicle was hanging down and made it difficult to see. The vehicle was taken to a dealer, where it was diagnosed that the adhesive…

  TL* the contact owns a 2006 chrysler crossfire. The contact stated that rear windshield fell out of the vehicle. As a result, the roof liner on the top rear of the vehicle was hanging down and made it difficult to see. The vehicle was taken to a dealer, where it was diagnosed that the adhesive around the rear windshield failed and needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 40,000.

• May 12, 2015CA39,300 mi
  Unknown or other

  Glass window adhesive failing. glass window IS separating from cloth roof. this IS a common occurrence in all crossfires. two areas where the glue/adhesive IS failing and causing unsafe conditions. called chrysler and was told no warranty or recall. window could fall out and cause severe damage or accident.

• May 4, 2015TX73,338 mi
  Structure › Body · Visibility/wiper

  It appears chrysler has extended their warranty on 2005 models for this very same problem. what ever fix they think they made for later models didn't work. They need to cover this safety issue. *tr

• Jan 7, 2015TN100,000 mi
  Exterior lighting

  The headlights become very pitted and foggy and cause it hard to see while driving at night. *tr

• Nov 7, 2014VA38,000 mi
  Structure · Visibility/wiper
  Chrysler extended the warranty on the 2005 model and acknowledged that the back window on the convertibles tend to come unglued and fall out. I own a 2006 model and I just got off the phone with a chrysler rep and she said "there have been no reports" for the 2006 back window coming unglued on the…

  Chrysler extended the warranty on the 2005 model and acknowledged that the back window on the convertibles tend to come unglued and fall out. I own a 2006 model and I just got off the phone with a chrysler rep and she said "there have been no reports" for the 2006 back window coming unglued on the convertibles so I have to pay for the repair out of my pocket and "keep good receipts" in case chrysler decides to take ownership of it's manufacturing defect in the 2006 model. I don't understand how the same manufacturing defect can be recognized for one year and not the next. What can chrysler produce to show that they fixed the problem with the 2006 convertibles? also, I see many people complaining that the 2006 model has the same problem with the rear window falling out so why am I the only complaint on record with chrysler??? this IS a safety issue not a cosmetic problem. Why wouldn't chrysler want their vehicles to be safe? I was also told on the phone that there are some things that are maintenance issues that are the responsibility of the owner. I never thought in a million years that I it would be my responsibility to ensure all the windows stayed on the car!!!! *tr

• Oct 28, 2014GA59,500 mi
  Electrical system

  Ignition problems. when looking online it appears that this car has a history of ignition problems. can't get the car to start. feels like the ignition IS loose. have to turn and wiggle and hope it starts. just bought this car and very disappointed. hope there IS a recall since it seems to be such a problem for so many people!!!! *tr

• Sep 1, 2014SC51,320 mi
  Structure
  I own a 2006 chrysler crossfire convertible.on august 29,2014 while parked at a store my backglass came unglued from the top.i was told that the entire canvas top has to be replaced.i went online and this was confirmed.i also saw numerous complaints about this issue.they say it comes unglued due to…

  I own a 2006 chrysler crossfire convertible.on august 29,2014 while parked at a store my backglass came unglued from the top.i was told that the entire canvas top has to be replaced.i went online and this was confirmed.i also saw numerous complaints about this issue.they say it comes unglued due to heat.my car IS always kept in a garage and other than this in excellent condtion.this IS clearly a chrysler defect as they are not installing the backglass with a seal that holds up under heat.if this had happened while driving there could have been serious consequences.i & others am not sure what to do,so I hope this will be handled urgently.thank you *tr

• Jul 20, 2014TX43,000 mi
  Structure · Visibility › Glass, side/rear
  Adhesive holding rear window in place began to separate from convertible top. Other crossfire owners have reported total failure. This IS a significant safety issue if/when the rear window completely separates and detaches from the vehicle and poses a hazard to others i.e., pedestrian, motorcycle…

  Adhesive holding rear window in place began to separate from convertible top. Other crossfire owners have reported total failure. This IS a significant safety issue if/when the rear window completely separates and detaches from the vehicle and poses a hazard to others i.e., pedestrian, motorcycle riders, etc. All the tops were produced by the same manufacturer (karmann) although chrysler IS only willing to replace certain 2005 models based on the state they were originally sold. This makes no sense, chrysler and the nhtsa should recall all tops produced and replace them with a top with the rear window attached with some type of improved adhesive so the risk to others IS eliminated. *tr

• Jul 17, 2014SC69,000 mi
  Structure · Visibility › Glass, side/rear
  I purchased this car new in 2007 from a chrysler dealer. Having heard after I purchased it, that there were concerns about the installation of the rear window coming loose. armed with that knowledge, I purposely did not stress the top or window area, in fact, never had the top down as that would…

  I purchased this car new in 2007 from a chrysler dealer. Having heard after I purchased it, that there were concerns about the installation of the rear window coming loose. armed with that knowledge, I purposely did not stress the top or window area, in fact, never had the top down as that would stress the taughtness of the window. now, 2014 the window IS coming loose. I took it to the purchasing dealer and they said there was no recourse or repair and a new replacement top would be needed but that it would probably do the same thing in time because the construction method was the same as before. This defect IS well known to crossfire owners and many of these tops have been repaired or replaced by some chrysler dealers. *tr

• Jun 9, 2014WI37,400 mi
  Structure › Body · Visibility › Glass, side/rear
  As I was driving home from work, the rear convertible window dislodged from the canvas by 80%.I slowly drove the vehicle to two local authorized chrysler dealerships for inspections. Both dealerships stated that the 1/2' of adhesive that glued the window to the canvas had deteriorated and caused…

  As I was driving home from work, the rear convertible window dislodged from the canvas by 80%.I slowly drove the vehicle to two local authorized chrysler dealerships for inspections. Both dealerships stated that the 1/2' of adhesive that glued the window to the canvas had deteriorated and caused the window to come loose. The second authorized dealer took photos as well as I did documenting the damage. This car IS rated by daimler-benz of speeds up to 154 mph. If the window would have completely dislodged it would have seriously injured or killed anyone traveling behind me. I was appalled by the cheap quality construction and workmanship of the install of this window. I have photos documenting the quality (or lack of) the design. I have read some articles on the internet where owners claim that they (chrysler-daimler-benz) have replaced roofs because of this defect. I believe in the interest of safety, that these vehicles should be mandatory recalled and forced to repair these serious defects. *tr

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
• 10229181Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
• 10229178Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
• 10223942Convertible Switch Lamp Flashes When Attempting To Operate The Power Convertible Top, Convertible Top Does Not Operate to Open
• 10223602Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
• 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
• 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
• 10221515Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
• 10221512Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
• 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
• 10220489Valve Body. These may cause over drive cycling.
• 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
• 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
• 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
• 1021645482212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
• 10191460Valve Body. These may cause over drive cycling.
• 10183053Convertible Switch Lamp Flashes When Attempting To Operate The Power Convertible Top, Convertible Top Does Not Operate to Open
• 10175743Disinfectant Solution Recommended for COVID-19
• 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
• 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
• 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
• 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
• 10130081Return: Wiring Assy - Engine You have been identified as either having stock, or have stock in transit to your dealership. Please return stock packaged before 2016/07/31 (31 July, 2016)of follow ing part numbers:68176457AF, 68176459AF. Please return suspect parts back to your facing depot using Return Code 02, before 13 September, 2016.
• 1013008005182535AD - Lamp Assy ?Tail Light LT You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 05182535AD . See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
• 10130079Inspect and Return: Trim Cover Assy - A-Pillar Rt/Lt You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part numbers: 1ZA04DX9AE, 1ZA05DX9AE. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 12 September, 2016.
• 10129047Warranty Operations Newsletter Updates from Warranty Operations
• 10129046Warranty Operations Newsletter Updates from Warranty Operations
• 10129045CBXDP361AA Return: Spacer Kit - Visor You have been identified as either having stock, or have stock in transit to your dealership. Please return stock of part number CBXDP361AA. Replacement part number is CBXDP361AB w hich is in stock and available for order. Please return suspect parts back to your facing depot using Return Code 02, before 16 September, 2016.
• 101290441NT30XDVAC - Inspect and Return: Panel - Instrument Panel You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of part number 1N T30XDVAC. See attachments for identifying suspect stock. Replacement part can be obtained by reordering the same part number. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
• 10129043Inspect and Return: Solenoid Module - Transmission You have been identified as either having stock, or have stock in transit to your dealership. Please return suspect stock of follow ing part numbers:52120000AA, 52119435AF, 05078709AB. See attachments for identifying suspect stock. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
• 10129042Return: Lamp Assy - CHMSL& Cargo Light You have been identified as either having stock, or have stock in transit to your dealership. Please return all stock of follow ing part numbers:55372082AE, 55372082AD, 55372082AC, 55372082AB, 55372082AA. Replacement part number is 55372082AF w hich is in stock and available. Please return suspect parts back to your facing depot using Return Code 02, before 07 September, 2016.
• 10129041P/N CBSZR068AA: Inspect & Return: Module Kit - Occupant Restraint You have been identified as either having stock, or have stock in transit to your dealership. Please return part number CBSZR068AA as per the QIR attached. Replacement part can be obtained by ordering the same part number (CBSZR068AA) Please return suspect parts back to your facing depot using Return Code 02, before 02 September, 2016.
• 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
• 10121927NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
• 10121832Wiper If Mopar OE wipers are unavailable, the below alternatives can be offered instead. 05066964A$ = WBRW0011A$ 05066973A$ = WB000019A$ or WBF00019A$ 05096134A$ = WB000027A$ or WBF00028A$ 55154762A$ = WB000013A$ 68001330A$ = WB000019A$ or WBF00019A$ 05012611A$ = WB000021A$ or WBF00021A$ 05102881A$ = WBRW0011A$
• 10021248Cracked windshield due to being hit by a foreign object like a stone.
• 10021247Tire pressure monitor system information.
• 10021239Powertrain control module initialization.
• 10019269The radiator cooling fan motor may have been improperly assembled. Customer satisfaction notification E19 radiator cooling fan module.
• 10019250Instrument cluster initialization.

Every Chrysler Crossfire model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.