1998 Damon Ultrasport
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Damon › Ultrasport › 1998
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1998 Damon Ultrasport. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
2 recalls name the 1998 Damon Ultrasport. Newest first.
Certain travel trailers and motor homes equipped with a two-door refrigerator, manufactured by the dometic corporation, may have a defect in the boiler tube. pressurized coolant solution could be released into an area where an ignition source (gas flame) IS present.
Release of coolant under certain conditions could ignite and result in a fire.
Damon will be working with dometic in order to repair these refrigerators (please see 06e076). dometic will repair these refrigerators by installing a secondary burn housing, a thermal fuse, and a melt fuse free of charge. dometic has retained stericycle inc. To manage this campaign. stericycle will assist you in locating dealerships or service centers and will provide assistance with scheduling of appointments. owners may contact dometic/stericycle at 1-888-446-5157 or damon at 1-800-860-3812.
Vehicle description: class a and c motor homes. the hardware used to secure the liquid propane (lp) tank was not tightened properly.
If the lp tank IS not secured, the tank could fall to the ground while the motor home IS being driven.
Dealers will inspect the motor homes to verify that the proper hardware IS being used and that all nuts are tightened properly.
Diode inside the wiring harness exploded and burned causing the vehicle to have no brake lights, damon claims no responsibility for the problem because the wiring harness was installed by freightliner (on a 1997 chassis). mr *nlm
Failed state safety inspection. Freightliner chassis service bulletin issued: sb54-3. "Brake lights diode revision" this should be a recall. This failure has cost hundreds of dollars tring to isolate the problem when a simple recall would have saved us time and money. We also had to buy the replacement part. I will also report the problem to the missouri state inspection authorities. dt
The wall IS separating from the floor and the crossmember that supports the floor IS bent. *ak
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.