1989 Dodge Lancer
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Lancer › 1989
These records cover every 1989 Dodge Lancer. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 1989 Dodge Lancer. Newest first.
Federal mogul IS recalling 6,903 aftermarket ball joint assemblies shipped between november 9, 2007 and march 26, 2008, which may have been packaged with incorrect nuts. the part numbers packaged with incorrect nuts are: k7147, k7329, k8683, and 104353. these parts were made for use on the various vehicles listed above.
Risk and remedy
Risk
The nuts included in the packaging for these ball joint assemblies are missing the intended prevailing torque (self-locking) feature. if the incorrect nut was to become loose, the joining members may loosen leading to a separation of the ball joint. this may result in loss of vehicle control, possibly resulting in a vehicle crash.
Remedy
Federal mogul will notify owners and replace the parts free of charge. the recall began on may 22, 2008. owners can contact federal mogul at 877-489-6659.
The engine valve cover gasket may dislocate and allow an engine oil leak at the gasket.
Risk and remedy
Risk
The leakage of oil in the engine compartment could causea fire.
Remedy
Replace gasket cover with revised cover, and rtv sealant will be applied in place of a gasket.
Owner complaints
2 complaints1 involved a crash1 involved a fire1 injuries
What owners report most
Latest complaints
- Fuel system, gasoline › Delivery
Return line to gas tank leaked, causing fire.
- Seats › Front assembly › Recliner
Upon impact, during rear end collision at approx. 25Mph, driver's seat back rest broke then collapsed rearward. tt
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10150552Child Seat Tether Anchor Installation This bulletin describes procedures to install Child Seat Tether Anchors based on Customer Request. Retrofits are subject to part availability. Vehicles in the following list that are marked **** for the model year are no longer supported with OEM retrofit kits. NOTE: Dealers are encouraged to honor any customers? request for the installation of the Child Seat Tether Anchors and Dealer reimbursement will be made by FCA US LLC regardless of vehicle age or mileage. See the Warranty Policy and Procedure Manual and/or Warranty Bulletin D-08-33 for reimbursement detail.
- 6088786Concerns with engine coolant usage. *Nlm
- 621898Automatic transmission fluid usage ATF+4.
- 618049Subject regarding wire splice repairs.
- 615688Subject regarding child seat tether anchors.
- 612160Subject on the child seat tether anchors. *Mjs
- 610635Subject regarding child seat tether anchors.
- 609995This bulletin provides a revised wire splice procedure and related parts.
- 607963Information on child seat tether anchors.
- 52963Various car owner's have expressed interest in using engine coolants made with propylene glycol instead of ethylene glycol.
- 51942Difficult to clean light colored "chalky" residue from plastic body components that are molded in black.
- 46371Bulletin supersedes technical service bulletin 08-16-95, dated apr. 14, 1995. If the vehicle operator **repeatedly** presses and releases the set button with their foot off of the accelerator (a 'lift foot set' to begin speed control operation), the vehicle may accelerate and exceed the desired set speed by up to 5 mph (8 km/h) and then decelerate to less than the desired set speed before finally achieving the desired set speed.
Every Dodge Lancer model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.