2001 Dodge Neon RT

Recalls

1 recall names the 2001 Dodge Neon RT. Newest first.

• Electrical system › Starter assembly

  Dec 12, 2000NHTSA 00V41600030 vehicles

  Vehicle description: passenger vehicles. starter assemblies were built with suspect plastic terminal blocks which could develop stress cracks subsequent to their installation onto the body of the starter. separation of the terminal block from the starter body could potentially allow the un-fused positive terminal to come into contact with an adjacent…

  Risk and remedy

  Risk

  This condition could overheat the starter wiring, creating the potential for a vehicle fire.

  Remedy

  Dealers will replace the starter terminal block jumper harness.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system4
2. Engine1
3. Exterior lighting1
4. Steering1
5. Suspension1

Latest complaints

• Jun 27, 2017CA
  Engine · Steering · Suspension
  Recently purchased my neon still have to register it in my name when the front bussings in the stabilizer bar literly fell out and I was in a rural area n had to tie it together using shoe laces and wire that I found I thought to look on the recalls list to find my neon has almost every problem…

  Recently purchased my neon still have to register it in my name when the front bussings in the stabilizer bar literly fell out and I was in a rural area n had to tie it together using shoe laces and wire that I found I thought to look on the recalls list to find my neon has almost every problem listed on the safty recall for a 2001 neon I am a single parent full time college student this IS mine and my daughters only transportation some one looked under it and said our health and safety are at risk every time we get into the car how do I get theses things fixed what do I do the vehicle was in motion n got very wobbley allso the engine when coming to a stop with foot on break gets ruff and will die sometimes I put brand new tires on it brior to the bushing falling out from firestone and they would have seen problem if it wasnt some kind of defect, I have receipts for maintenence oil change spark plugs coil packs fuel filterect

• Oct 1, 2015TN
  Electrical system
  This car has a defective design. The multifunction switch that controls the turn signals, headlights, and foglights continuously blows fuses. The dealer quoted me over $98.00 per hour to "diagnose" the problem, and could not offer any hope of how many hours it would take to fix. This IS a…

  This car has a defective design. The multifunction switch that controls the turn signals, headlights, and foglights continuously blows fuses. The dealer quoted me over $98.00 per hour to "diagnose" the problem, and could not offer any hope of how many hours it would take to fix. This IS a manufacturing defect, as no circuit components have been altered in any way. I obtained a new multifunction switch, hoping this would fix the problem. On further investigation, the wiring harness connector IS cracked due to heat and partially melted. The individual spade connectors are blackened due to excessive current draw through them. this IS dangerous at best, potentially catastrophic at worst.

• Apr 16, 2008IL125,000 miFire
  Electrical system › Instrument cluster/panel · Electrical system › Wiring › Interior/under dash
  In 2004 I had to replace the wiring harness and the multi function switch, fast forward to april 2008 and the same symptoms occurred, dangerously hot steering column, and smoke coming out of it. I think they need to be replaced again (original cost to replace was $1,100). I am extremely…

  In 2004 I had to replace the wiring harness and the multi function switch, fast forward to april 2008 and the same symptoms occurred, dangerously hot steering column, and smoke coming out of it. I think they need to be replaced again (original cost to replace was $1,100). I am extremely disappointed that this problem has not been a reason for a recall, does someone need to die before this can be implemented? I searched online and found that I am not the only one that this has happened to. *tr

• Oct 23, 2007PA79,500 mi
  Exterior lighting › Headlights › Switch
  Safety issue. multi function switch for the light system IS melting to the wiring harness and causing the lights to fail. Periodically the headlights would stop working and then start again. as the problem progresses smoke releases from the steering column and the headlights fail. this problem…

  Safety issue. multi function switch for the light system IS melting to the wiring harness and causing the lights to fail. Periodically the headlights would stop working and then start again. as the problem progresses smoke releases from the steering column and the headlights fail. this problem was repaired about 18 months ago by a licensed mechanic, with dodge replacement parts, and IS occurring again. probable fire problem. contacted dodge and they are not concerned since both times the car was out of warranty. I need to have this repaired soon and will keep the parts. *tr

• Jan 19, 2003FL40,000 mi
  Electrical system › Wiring

  Thursday, january 16TH, 2003: when driving at night, my lights turned off. I stopped and then discovered my high beams still owrked. drove home sunday, january 19TH, 2003: attended funeral of uncle and did get to leave till dark. drove home with high beams. When arrived home, low beams now work conditons: was extremely cold, temperature well below normal

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
• 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
• 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
• 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
• 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
• 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
• 10191460Valve Body. These may cause over drive cycling.
• 10175743Disinfectant Solution Recommended for COVID-19
• 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
• 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
• 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
• 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
• 1012900882212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~