1999 Dodge Viper Gts
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Viper Gts › 1999
These records cover every 1999 Dodge Viper Gts. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
1 complaints1 involved a fire2 injuries
Latest complaints
- Fuel system, gasoline
Gasoline fuel fire - burned the rear half of a 1999 dodge viper gts coupe ( totalled ), 15000 miles, mint condition. gas pump auto shut off did not function ( per fire marshall's report) told pei about it. car was off, not car defect. hot exhaust below fuel fill door on viper right side. ashland virginia texaco station.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10229256KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10223854Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 Nm [21 ft. lbs.].
- 10221686KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10191460Valve Body. These may cause over drive cycling.
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10150552Child Seat Tether Anchor Installation This bulletin describes procedures to install Child Seat Tether Anchors based on Customer Request. Retrofits are subject to part availability. Vehicles in the following list that are marked **** for the model year are no longer supported with OEM retrofit kits. NOTE: Dealers are encouraged to honor any customers? request for the installation of the Child Seat Tether Anchors and Dealer reimbursement will be made by FCA US LLC regardless of vehicle age or mileage. See the Warranty Policy and Procedure Manual and/or Warranty Bulletin D-08-33 for reimbursement detail.
- 618049Subject regarding wire splice repairs.
- 615688Subject regarding child seat tether anchors.
- 612160Subject on the child seat tether anchors. *Mjs
- 610635Subject regarding child seat tether anchors.
- 609995This bulletin provides a revised wire splice procedure and related parts.
- 609988Subject regarding misdiagnosed leak detection pump systems with diagnostic trouble codes p1494, p0442 p0455, or p0456.
Every Dodge Viper Gts model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.