Keystone RV Company (Keystone) is recalling certain 2020-2021 Dutchmen Voltage 3001, 3351, 3521, 3531, 3551, 3571, 3951 and 4271 recreational trailers. The Federal Identification Tag incorrectly lists the recommended tire pressure as 110 PSI, instead of the correct tire pressure of 95 PSI. As such, these vehicles fail to comply with the requirements of 49…
Risk and remedy
Risk
Incorrect PSI information could cause the tires to be overinflated, and increase the risk of a crash.
Remedy
Keystone will notify owners, and dealers will replace the Federal Identification Tag, free of charge. The recall began February 3, 2021. Owners may contact Keystone customer service at 1-866-425-4369. Keystone's number for this recall is 21-399.
Keystone RV Company (Keystone) is recalling certain 2020 Alpine, Avalanche, Fuzion, Laredo, Montana, Raptor, Crossroads Redwood, and Dutchmen Voltage trailers. The adhesive bond between the glass and the metal frame of the frameless windows may fail which can allow the glass to detach while moving.
Risk and remedy
Risk
If the window glass detaches while the vehicle is moving it could become a projectile, increasing the risk of injury or a crash.
Remedy
Keystone will notify owners, and dealers will inspect the windows for proper adhesive bond strength, replacing the windows as necessary, free of charge. This recall began July 24, 2020. Owners may contact Keystone customer service at 1-866-425-4369. Keystone's number for this recall is 20-375.
Keystone RV Company (Keystone) is recalling certain 2019-2020 Dutchmen Voltage trailers, model 4185. An 18,000 lb.-capacity fifth wheel pin box may have been installed instead of the specified 21,000 lb-capacity pin box hitch.
Risk and remedy
Risk
If the vehicle is loaded to a weight greater than 18,000 lbs, the pin box may fail, increasing the risk of crash.
Remedy
Keystone will notify owners, and dealers will replace the pin box inner with a pin box inner rated for 21,000 lbs, free of charge. The recall began June 18, 2019. Owners may contact Keystone customer service at 1-866-425-4369. Keystone's number for this recall is 19-354.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
10187442This is the inspection instructions for KSB-210218, Inspection Process Sidewall Cracks. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Inspection information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this inspection is covered by warranty. Not every unit requires a repair. This process describes the inspection of sidewall cracks and separation forward of the front slideouts to determine if there is a defect and what repair may need to be performed.
10187441This is the revised repair instructions for KSB-180328. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not do-it-yourselfers. Information is not presented as a repair guaranteed to be covered by warranty. Keystones P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this repair is covered by warranty. Not every unit listed requires a repair. Please read through the instructions start to finish before attempting the repair. This process describes the safe and proper procedure to repair any unit which experiences a crack at the bottom corner of a slideout at the gooseneck of a 5th wheel, opening the side wall to repair broken tube welds and add reinforcement. This technical service bulletin explains how to perform the repair. Please note: A sublet will be required for aluminum welding if you do not have that capability.
10172607This is the repair instructions, dealer letter, and owner letter for advisory 20-375. It has been determined certain Kinro frameless windows were manufactured with a poor adhesive bond between the glass and aluminum frame, and attachments on crank out and egress windows. The remedy is to perform a pull test on the frameless windows at the vent and replace the vent portion if the glue bond fails during the pull test.
Every Dutchmen Voltage model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.