2015 E-One C2

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10238707E-ONE has been contacted by Reyco Granning concerning the Independent Front Suspension (IFS) on your vehicle. Some IFS-FT units may have shock absorbers that experience excessive loading during road events that cause full extension of the shock absorber. This can result in damage to and possible failure of the shock absorber.
• 10179131August 2020 TSB report for E-ONE, Inc.
• 10177837TSB report for July, 2020. One TSB was sent for the month of July. The TSB only applies to E-ONE chassis' with Cummins Export engines.
• 10155364Front intake Storz adapter (E-ONE part number 572138) does not include an intake strainer compliant with NFPA 1901. E-ONE is replacing the complete adapter with strainer at no charge.
• 10110905Reyco Granning IFS suspensions may include spacers made of incorrect material. This may cause shock mounting to become loose and rattle at the upper connection to the cradle
• 10088261The brigade 360 camera system offers a 360 degree birds eye view of the vehicle. The system consists of 4 cameras located on front, left, right and rear of the vehicle. The system can also be equipped with an mdr recording devise. The images are stored internally in the devise and can be retrieved for evaluation. While all camera views are being recorded individually while driving, individual camera views are selected based on events. The 360 degree birds eye view IS only recorded while the vehicle IS stationary with the park brake applied. The brigade 360 mdr can also be configured to record all four cameras at all times, ignoring all triggers. Since this recording option has been recognized to be of value when investigating incidents, e-one has decided to facilitate this option to our customers in the field with brigade 360 camera systems and mdrs installed.
• 10082981E-one would like to make sure customers are aware of the proper aerial operating sequence when using their hp100 platforms. When setting up outriggers it IS expected that the system be transferred to aerial mode after outriggers are set, even if you do not intend on using the aerial device right away. The aerial circuit has better cooling capacity and operates at a lower standby pressure than the outrigger system. The outrigger system operates on a high pressure standby system to ensure responsive and timely deployment of outriggers. If the pto IS left engaged for extended periods of time, while the system IS in jack mode, it could overheat. It IS also expected of the customer to disengage the pto whenever the system IS not used. If the outriggers are set, and the aerial device IS not needed, please either turn off the pto or engage the aerial system within 10 minutes.

Every E-One C2 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.