2021 Fccc S2
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2021 Fccc S2. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2021 Fccc S2. Newest first.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021-2022 Freightliner 114SD, 122SD, Business Class M2, Cascadia, 108SD, Western Star 4900, 4700, 5700, Custom Chass RV Chassis, Custom Chass S2 Chassis, Custom Chass XC Chassis, Custom Chass XB Chassis, and Custom Chass MT Chassis. The tie rod clamps may be loose, which could result in loose…
Risk and remedy
Risk
Detached or broken tie rod ends can result in steering loss, increasing the risk of a crash.
Remedy
Dealers will replace the tie rod clamp bolts and nuts, free of charge. Owner notification letters were mailed December 23, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-888.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2021 Freightliner Custom Chassis MC, Business Class M2, Custom Chassis MBC Chassis, Custom Chassis S2 Chassis, Custom Chassis MT55 Chassis, and 2022 Custom Chassis Saf-T-Liner C2 vehicles. The hydraulic caliper tie bar support fasteners on the steer axles may not have been properly tightened or…
Risk and remedy
Risk
A dangling tie bar could come in contact with the rotating wheel-end components or damage may occur from the brake parts flexing. Either scenario may increase the risk of a crash.
Remedy
DTNA will notify owners, and dealers will inspect both steer axle wheel-ends to make sure that the four tie bar mounting fasteners are properly tightened. If the required tie bar is missing, the caliper anchor mounts and functionality (brake pad slide pins and pad movement) will be inspected before installing a tie bar. All repairs will be performed free of charge. The recall began February 18, 2021. DTNA's number for this recall is FL-871.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010186CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
- 11000988My Communications for SSI DEF Header Warranty Policy Extension for B6 7 Engines Model Years 2017-2021
- 10253878Extended Warranty Policy for certain Cummins B6.7 engines with SSI DEF headers for EPA and CARB Emissions Reporting
- 10225495FCCC Service Bulletin for DEF Connector Reinforcement Caps. Some customers experience separation of the diesel exhaust fluid (DEF) lines from the connection ports in extreme cold temperatures. To prevent this, a process was developed to secure the lines with wire ties. A new reinforcement cap has been developed to simplify this process at the DEF connection fittings.
- 10187524Superseding Letter to an Important Campaign Information Letter to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately. This letter supersedes ICI20-022R.
- 10187443Warranty Information Letter for Body Builder/Truck Equipment Manufacturer Demonstration Program.
- 10184786FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
- 10181761Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
- 10178945Revised letter is to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately.
- 10176790Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
Every Fccc S2 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.