2019 Fccc S2RV
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2019 Fccc S2RV. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2019 Fccc S2RV. Newest first.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose…
Risk and remedy
Risk
Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
Remedy
DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Owner complaints
2 complaints
What owners report most
Latest complaints
- Electrical system · Exterior lighting
The contact owns 2019 FCC RV000042S. The contact received notification of NHTSA Campaign Number: 20V404000 (Electrical System, Exterior Lighting) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a…
The contact owns 2019 FCC RV000042S. The contact received notification of NHTSA Campaign Number: 20V404000 (Electrical System, Exterior Lighting) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Equipment
TL* the contact owns a 2019 freightliner S2 106. The contact received notification of nhtsa campaign number: 20v796000 (equipment) however, the part to do the recall repair was unavailable. The vehicle was taken to manteca trailer & motorhome, llc. (204 vasconcellos ave, manteca, ca 95336) where it…
TL* the contact owns a 2019 freightliner S2 106. The contact received notification of nhtsa campaign number: 20v796000 (equipment) however, the part to do the recall repair was unavailable. The vehicle was taken to manteca trailer & motorhome, llc. (204 vasconcellos ave, manteca, ca 95336) where it was confirmed that the part was not yet available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011076Warranty Information letter for Detroit Line or Line Seal, High Pressure Fuel Injector Standard Repair Time Updates
- 11010186CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
- 11010143Service Solution for Detroit Successful Regen Reference for GHG17 DD Engines
- 11008508Service Solution for Detroit Successful Regen Reference for GHG17 DD Engines
- 11000988My Communications for SSI DEF Header Warranty Policy Extension for B6 7 Engines Model Years 2017-2021
- 10253878Extended Warranty Policy for certain Cummins B6.7 engines with SSI DEF headers for EPA and CARB Emissions Reporting
- 10251202Important Campaign Information letter for FL974 - Revised Bulletin & Population
- 10251200Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
- 10249516Emissions Recall: Cummins DEF Sensor Shortage
- 10189319Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
- 10187835Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10187524Superseding Letter to an Important Campaign Information Letter to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately. This letter supersedes ICI20-022R.
- 10187444Warranty Information Letter for Detroit NOx Sensor Circuit Fault Codes - Claim Guidelines.
- 10187443Warranty Information Letter for Body Builder/Truck Equipment Manufacturer Demonstration Program.
- 10187440Revised Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes. Revisions are in blue font.
- 10183320Service Solution for False DEF Fault Codes on chassis with Cummins engines. Symptoms are various active and inactive fault codes for DEF Quality or DEF level. The issue could be caused by the coolant hoses swapped at the bulkhead fittings, thru the frame rail causing the coolant flow inside the header assembly to be reversed.
- 10181761Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
- 10178945Revised letter is to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately.
- 10178006Important Campaign Information letter announcing Dealer Travel for Campaign Performance. This letter is to announce a reimbursement available to dealers for travel to a customers location to perform a recall or field service campaign.
- 10177979Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes.
- 10177691OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10177690Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLink 8.12 Standard and Professional is available to download from the Detroit Diesel server.
- 10177657Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
- 10176790Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
- 10174376Warranty Information Letter for Warranty Training Online. DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.
- 10174061Warranty Policy Letter for Chassis Progressive Damage Policy Change. Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).
- 10174060Warranty Policy Letter for Handling for Authorized Service Location Part Transfers. To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program
- 10174052Warranty Policy Letter for Handling Change: Over the Counter Aftermarket Parts Replacement Program. DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.
- 10172649Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLink 8.11 Standard and Professional will be available for download from the Detroit Diesel server.
- 10172579Open recall and Field service Campaigns report send out to Dealers, General Managers, Service managers and warranty managers.
- 10172547Warranty Policy Letter explaining the Warranty Department is aligning with the frame rail repair policy, published in DTNA Workshop Manuals, which states that there are very few cases in which welding a heat-treated frame rail is allowed. Therefore, before welding anything on a frame rail, contact the applicable regional service representative for approval.
- 10171361Service Bulletin for Guidelines for Repairing or Replacing an Electrical Harness. Use the guidelines in this bulletin to determine if a damaged electrical harness should be repaired or replaced.
- 10169679Warranty Information Letter announcing Detroit NOx Sensor Circuit Improvements for GHG17 After Treatment Systems
- 10163625HDEP GHG17 engines are not equipped with turbo wastegates. Steps in this troubleshooting involving wastegates were removed.
- 10163622The modified parked regeneration strategy has been standard on GHG17 units since the start of GHG17 production and was added to EPA10 and GHG14 units with a software update. The modified regeneration utilizes an improved strategy to clean the DOC inlet face and reduce downtime due to DOC face plugging.
- 10163620DTNA Special Tools Group has approved the use of Haweka Axis4000 aftermarket alignment system for use on DTNA products at DTNA service locations. The Axis4000 system uses the reference points required by DTNA for precise, accurate, and repeatable measurements. Axis4000 is a sophisticated, user-friendly system that utilizes computer based camera-radio technology and references the center line of the frame for measuring and providing alignment results to DTNA specifications.
- 10154893MT Park Brake Cable Rub letter
- 10154447D18M7 ? Replaced by Recall D18R7 (FL802)
Every Fccc S2RV model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.