2017 Fccc Xbr
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2017 Fccc Xbr. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2017 Fccc Xbr. Newest first.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis XBP, 2017-2020 XBR, 2017-2022 XBS, 2016-2019 XCL, 2016-2023 XCM, 2017-2021 XCP, 2016-2023 XCR, and 2017-2023 XCS recreational vehicle chassis. The rear mounted Power Distribution Module (PDM) may have internal damage, which could result in the rear marker lights…
Risk and remedy
Risk
Non-functioning brake lights, rear markers, or turn signals can reduce vehicle visibility to other drivers, increasing the risk of a crash.
Remedy
Dealer will install a secondary fused harness, free of charge. Owner notification letters were mailed March 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL917. This recall is an expansion of NHTSA recalls 20V-404 and 18V-502. Vehicles previously recalled will need to receive the new remedy repair once it is available.
Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not…
Risk and remedy
Risk
Nonfunctioning lights can increase the risk of a crash.
Remedy
The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently…
Risk and remedy
Risk
If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.
Remedy
DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.
Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2011-2017 Freightliner Custom Chassis Corporation (FCCC) XBR, XCL, XCM, and XCR recreational vehicle chassis, equipped with Cummins ISL engines. The power steering hose on the affected vehicles may be routed incorrectly, and, as a result, the hose may rub against the power stud on the…
Risk and remedy
Risk
Electrical arcing in the presence of leaking power steering fluid can increase the risk of a fire.
Remedy
DTNA will notify owners, and dealers will reroute the power steering hose to provide proper clearance, free of charge. The recall is expected to begin on May 2018. Owners may contact DTNA customer service at 1-800-547-0712 . DTNA's number for this recall is FL-762. Note: This recall is an expansion of 16V-809.
Daimler Trucks North America, LLC (DTNA) is recalling certain model year 2016-2017 FCCC XBR, XCL, XCM, and XCR recreational vehicle chassis manufactured January 1, 2016, to October 12, 2016, equipped with Cummins ISL engines. The power steering hose on the affected vehicles may be routed incorrectly, and, as a result, the hose may rub against the power…
Risk and remedy
Risk
Electrical arcing in the presence of leaking power steering fluid can increase the risk of a fire.
Remedy
DTNA will notify owners, and dealers will reroute the power steering hose to provide proper clearance, free of charge. The recall began on December 27, 2016. Owners may contact DTNA customer service at 1-800-547-0712 . DTNA's number for this recall is FL-727.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Daimler Trucks North America Recalls
On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and…
On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011076Warranty Information letter for Detroit Line or Line Seal, High Pressure Fuel Injector Standard Repair Time Updates
- 11010186CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
- 10251202Important Campaign Information letter for FL974 - Revised Bulletin & Population
- 10251200Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
- 10249516Emissions Recall: Cummins DEF Sensor Shortage
- 10209409FCCC X-Line chassis, equipped with a certain rear mounted Power Distribution Module (PDM), may experience cracked internal solder joints, which after a period of vehicle use may lead to intermittent open circuits, in which the rear marker lights, brake lights, or left turn signal lights may not function. Brake lights that do not function correctly may not notify motorists of a braking event, which may lead to an increase risk of crash. A secondary fused harness will be added which bypasses the affected suspect portion of the PDM. Repairs will be performed by Daimler Trucks North America authorized service facilities.
- 10189319Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
- 10187835Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10187524Superseding Letter to an Important Campaign Information Letter to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately. This letter supersedes ICI20-022R.
- 10187444Warranty Information Letter for Detroit NOx Sensor Circuit Fault Codes - Claim Guidelines.
- 10187440Revised Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes. Revisions are in blue font.
- 10184786FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
- 10184029Revised Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. Revisions are in blue. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.
- 10183988Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.
- 10183734Freightliner Parts Technical Bulletin for Power Distribution Module (PDM) Dealer Inventory Check.
- 10183320Service Solution for False DEF Fault Codes on chassis with Cummins engines. Symptoms are various active and inactive fault codes for DEF Quality or DEF level. The issue could be caused by the coolant hoses swapped at the bulkhead fittings, thru the frame rail causing the coolant flow inside the header assembly to be reversed.
- 10181761Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
- 10180350Tech Talk discussion about power steering fluid.
- 10178945Revised letter is to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately.
- 10178006Important Campaign Information letter announcing Dealer Travel for Campaign Performance. This letter is to announce a reimbursement available to dealers for travel to a customers location to perform a recall or field service campaign.
- 10177979Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes.
- 10177838Warranty Information Letter informing that to ensure that DTNA policies and service network practices align, the Warranty Department will be revising the Warranty Manual.
- 10177692Technical Service Letter for EPA10, GHG14, GHG17 Diesel Particulate Filter (DPF) Compatibility. Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible.
- 10177691OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10177690Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLink 8.12 Standard and Professional is available to download from the Detroit Diesel server.
- 10177657Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
- 10176790Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
- 10174376Warranty Information Letter for Warranty Training Online. DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.
- 10174061Warranty Policy Letter for Chassis Progressive Damage Policy Change. Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).
- 10174060Warranty Policy Letter for Handling for Authorized Service Location Part Transfers. To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program
- 10174052Warranty Policy Letter for Handling Change: Over the Counter Aftermarket Parts Replacement Program. DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.
- 10173907Warranty Information Letter for Warranty Long Block Program Change. The Detroit Reman Long Block Program has expanded. The expansion reduces complexity in ordering reman engines and promotes stocking reman engines to meet uptime commitments.
- 10172649Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLink 8.11 Standard and Professional will be available for download from the Detroit Diesel server.
- 10172579Open recall and Field service Campaigns report send out to Dealers, General Managers, Service managers and warranty managers.
- 10169679Warranty Information Letter announcing Detroit NOx Sensor Circuit Improvements for GHG17 After Treatment Systems
- 10165491Service Solution to fix fault codes for DEF quality or DEF level
- 10163625HDEP GHG17 engines are not equipped with turbo wastegates. Steps in this troubleshooting involving wastegates were removed.
- 10163622The modified parked regeneration strategy has been standard on GHG17 units since the start of GHG17 production and was added to EPA10 and GHG14 units with a software update. The modified regeneration utilizes an improved strategy to clean the DOC inlet face and reduce downtime due to DOC face plugging.
- 10163620DTNA Special Tools Group has approved the use of Haweka Axis4000 aftermarket alignment system for use on DTNA products at DTNA service locations. The Axis4000 system uses the reference points required by DTNA for precise, accurate, and repeatable measurements. Axis4000 is a sophisticated, user-friendly system that utilizes computer based camera-radio technology and references the center line of the frame for measuring and providing alignment results to DTNA specifications.
- 10163548Training Solution created by DTNA to provide guidance to customers when searching for service information for components and systems not owned by Daimler Trucks North America (DTNA).
Every Fccc Xbr model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.