2021 Fccc Xcl
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2021 Fccc Xcl. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2021 Fccc Xcl. Newest first.
Daimler Trucks North America, LLC (DTNA) is recalling 2021 Western Star 4700 and 5700, Freightliner Business Class M2, Cascadia, and Custom Chassis XC Chassis vehicles manufactured with a certain steering arm configuration with air disc brakes identified by the axle assembly supplier. On certain vehicles, one of the six brake caliper mounting bolts on the…
Risk and remedy
Risk
The loose bolt could result in the other caliper bolts to loosen. Insufficiently tightened bolts may not provide adequate clamping force between the brake caliper and brake anchor plate, resulting in reduced brake effectiveness, increasing the risk of a crash.
Remedy
DTNA will notify owners, and dealers will inspect and repair as necessary, free of charge. The recall began March 17, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-873.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011076Warranty Information letter for Detroit Line or Line Seal, High Pressure Fuel Injector Standard Repair Time Updates
- 11010186CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
- 10251202Important Campaign Information letter for FL974 - Revised Bulletin & Population
- 10251200Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
- 10249516Emissions Recall: Cummins DEF Sensor Shortage
- 10209409FCCC X-Line chassis, equipped with a certain rear mounted Power Distribution Module (PDM), may experience cracked internal solder joints, which after a period of vehicle use may lead to intermittent open circuits, in which the rear marker lights, brake lights, or left turn signal lights may not function. Brake lights that do not function correctly may not notify motorists of a braking event, which may lead to an increase risk of crash. A secondary fused harness will be added which bypasses the affected suspect portion of the PDM. Repairs will be performed by Daimler Trucks North America authorized service facilities.
- 10189319Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
- 10187835Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10187524Superseding Letter to an Important Campaign Information Letter to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately. This letter supersedes ICI20-022R.
- 10187444Warranty Information Letter for Detroit NOx Sensor Circuit Fault Codes - Claim Guidelines.
- 10187443Warranty Information Letter for Body Builder/Truck Equipment Manufacturer Demonstration Program.
- 10187440Revised Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes. Revisions are in blue font.
- 10184786FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
- 10184029Revised Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. Revisions are in blue. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.
- 10183988Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.
- 10181761Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
- 10180350Tech Talk discussion about power steering fluid.
- 10178945Revised letter is to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately.
- 10178006Important Campaign Information letter announcing Dealer Travel for Campaign Performance. This letter is to announce a reimbursement available to dealers for travel to a customers location to perform a recall or field service campaign.
- 10177979Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes.
- 10177838Warranty Information Letter informing that to ensure that DTNA policies and service network practices align, the Warranty Department will be revising the Warranty Manual.
- 10177691OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10177690Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLink 8.12 Standard and Professional is available to download from the Detroit Diesel server.
- 10177657Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
- 10176790Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
Every Fccc Xcl model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.