2019 Fccc Xcm
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2019 Fccc Xcm. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2019 Fccc Xcm. Newest first.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis XBP, 2017-2020 XBR, 2017-2022 XBS, 2016-2019 XCL, 2016-2023 XCM, 2017-2021 XCP, 2016-2023 XCR, and 2017-2023 XCS recreational vehicle chassis. The rear mounted Power Distribution Module (PDM) may have internal damage, which could result in the rear marker lights…
Risk and remedy
Risk
Non-functioning brake lights, rear markers, or turn signals can reduce vehicle visibility to other drivers, increasing the risk of a crash.
Remedy
Dealer will install a secondary fused harness, free of charge. Owner notification letters were mailed March 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL917. This recall is an expansion of NHTSA recalls 20V-404 and 18V-502. Vehicles previously recalled will need to receive the new remedy repair once it is available.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2017-2019 Freightliner Custom Chass XCL, 2017-2022 XCM, XCS, 2017-2023 MC, XCR, 2018-2019 XBR, 2018-2020 XBS, 2018-2022 MBC, MT55, S2C, S2G, S2RV vehicles. The tire valve stem extension for the inner wheel may come into contact with the outer wheel rim opening and become damaged.
Risk and remedy
Risk
Damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.
Remedy
Dealers will remove the inner valve stem extensions and stabilizers, free of charge. Owner notification letters were mailed January 18, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL912. Note: This recall supersedes and expands recall 20V-529 (FL-861). Vehicles previously repaired under 20V-529 will need to have the new remedy completed under this recall.
Daimler Trucks North America LLC (DTNA) is recall certain 2018-2019 Freightliner Custom Chass XCL, 2018-2021 Freightliner XCM chassis, XCS Chassis and MC Chassis and 2017-2021 XCR Chassis. The tire valve stem extension for the inner wheel may come in contact with the outer wheel rim opening and become damaged.
Risk and remedy
Risk
Extensive damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.
Remedy
DTNA will notify owners and dealer will inspect the inner wheel valve stem stabilizers and adjust as needed, free of charge. If the adjustment does not resolve the issue then the inner valve stem will be replaced, free of charge. The recall began October 29, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-861.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018-2019 Freightliner Custom Chassis XCL, XCP, XCR and XCS and 2015-2019 Custom Chassis XCM vehicles. The instrument panel brightness cannot be adjusted, possibly causing glare when driving at night. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…
Risk and remedy
Risk
Glare can reduce the driver's visibility of the road, thus increasing the risk of a crash.
Remedy
DTNA will notify owner, and dealers will update the software and processor, as necessary, free of charge. The recall began on April 1, 2021. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-859.
Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis Corporation (FCCC) XBP, 2016-2019 XCM, 2017-2020 XCS, 2018-2019 XBR, 2017-2019 XBS, 2016-2019 XCL, 2017-2020 XCP and 2016-2020 XCR recreation vehicle chassis that received the 'inspection-only' remedy from recall 18V-582. The rear mounted Power Distribution Module…
Risk and remedy
Risk
Non-functioning exterior marker lights can increase the risk of a crash.
Remedy
DTNA will notify owners, and dealers will replace the PDM, free of charge. DTNA issued owners an interim notification September 4, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-856.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Western Star 4700 and 5700, Freightliner Custom Chassis S2, Custom Chassis XB, and Custom Chassis XC vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened.
Risk and remedy
Risk
Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
Remedy
DTNA will notify owners, and dealers will inspect and repair the vehicles, free of charge. The recall began May 1, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-845.
Daimler Trucks North America LLC (DTNA) is recalling certain 2019 Freightliner 108SD, 114SD, Business Class M2, Cascadia, Western Star 5700, and FCCC XC Chassis vehicles equipped with air disc brakes. The brake caliper mounting bolts may have been insufficiently tightened.
Risk and remedy
Risk
Loose brake caliper mounting bolts may reduce the brake effectiveness, increasing the risk of crash.
Remedy
DTNA will notify the owners and affected vehicle manufacturers, and DTNA dealers will inspect and repair the vehicles, free of charge. The recall is expected to begin July 12, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-816.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose…
Risk and remedy
Risk
Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.
Remedy
DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.
Daimler Trucks North America, LLC (DTNA) is recalling certain 2018-2019 Freightliner 108SD, 114SD, Cascadia, Business Class M2, Freightliner Custom Chassis Corporation S2C 106 Cab, S2G Cab Chassis, XCL, XCM, XBS, XCP, XCR, Western Star 4700, 4900 and 5700 trucks. The brake caliper mounting bolts may have been insufficiently tightened.
Risk and remedy
Risk
Loose brake caliper mounting bolts can reduce brake effectiveness, increasing the risk of a crash.
Remedy
DTNA will notify owners, and dealers will check and tighten the brake caliper mounting bolts, free of charge. The recall began December 3, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-794.
Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2019 Freightliner Custom Chassis Corporation (FCCC) XBR, XBS, XCR, XCM, XCL, and XCS recreation vehicle chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not…
Risk and remedy
Risk
Nonfunctioning lights can increase the risk of a crash.
Remedy
The remedy for this recall is still under development. DTNA issued owners an interim notification on October 24, 2018. The recall began May 29, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL788.
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner M2 Business Class, 108SD, 114SD and Cascadia trucks, Western Star 4700, 4900, and 5700 trucks, FCCC S2C 106 Cab, S2G Cab, XBR, XBS, XCL, XCM, XCP, XCR, and XCS chassis equipped with air disc brakes. The brake caliper mounting bolts on these vehicles may be insufficiently…
Risk and remedy
Risk
If the brake caliper mounting bolts loosen, braking performance may be reduced, increasing the risk of a crash.
Remedy
DTNA will notify owners, and dealers will inspect the brake caliper mounting bolts and tighten them as necessary, free of charge. DTNA issued owners an interim notification on July 25, 2018. The recall began September 4, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-772.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011076Warranty Information letter for Detroit Line or Line Seal, High Pressure Fuel Injector Standard Repair Time Updates
- 11010186CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
- 10251202Important Campaign Information letter for FL974 - Revised Bulletin & Population
- 10251200Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
- 10249516Emissions Recall: Cummins DEF Sensor Shortage
- 10209409FCCC X-Line chassis, equipped with a certain rear mounted Power Distribution Module (PDM), may experience cracked internal solder joints, which after a period of vehicle use may lead to intermittent open circuits, in which the rear marker lights, brake lights, or left turn signal lights may not function. Brake lights that do not function correctly may not notify motorists of a braking event, which may lead to an increase risk of crash. A secondary fused harness will be added which bypasses the affected suspect portion of the PDM. Repairs will be performed by Daimler Trucks North America authorized service facilities.
- 10209298Field Service Campaign for FCCC XC Valor Tire Pressure Monitoring System (TPMS)
- 10203751Field Service Campaign for FCCC Viper Low Voltage Display. In a low voltage condition, the instrument panel (IP) display may not come on when turning on ignition leaving drivers without a functioning instrument panel. This would only occur at startup and the IP would function again if the key is cycled with normal voltage.
- 10203748Important Campaign Information Letter for SF637 - Campaign on Hold. This letter is to inform you that campaign SF637, FCCC Viper Low Voltage Display, will be on hold as of today Friday, 11/12/2021. The attached owner letter was mailed 11/02/2021 and the campaign will be released once the work instructions have been updated.
- 10190555Detroit Technical Service Letter for DD13 Cylinder Head and Cylinder Head Gasket Change.
- 10189319Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
- 10187835Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10187524Superseding Letter to an Important Campaign Information Letter to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately. This letter supersedes ICI20-022R.
- 10187444Warranty Information Letter for Detroit NOx Sensor Circuit Fault Codes - Claim Guidelines.
- 10187443Warranty Information Letter for Body Builder/Truck Equipment Manufacturer Demonstration Program.
- 10187440Revised Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes. Revisions are in blue font.
- 10184786FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
- 10184029Revised Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. Revisions are in blue. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.
- 10183988Warranty Policy Letter for Alliance/Mascot Aftermarket Warranty and Claim Filing. With Mascot now in partnership with Detroit Reman and Alliance Parts, DTNA is pleased to announce that Mascot coverage has been added to OWL. Remanufactured Alliance/Mascot parts include transmission, differential, steering gear, and steering pump used in an on-highway vehicle applications. The Alliance/Mascot aftermarket warranty coverage period has not changed: depending on the part, coverage is for one (1) or two (2) years and current parts, labor, and reimbursement policies apply.
- 10183734Freightliner Parts Technical Bulletin for Power Distribution Module (PDM) Dealer Inventory Check.
- 10183320Service Solution for False DEF Fault Codes on chassis with Cummins engines. Symptoms are various active and inactive fault codes for DEF Quality or DEF level. The issue could be caused by the coolant hoses swapped at the bulkhead fittings, thru the frame rail causing the coolant flow inside the header assembly to be reversed.
- 10181761Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
- 10180350Tech Talk discussion about power steering fluid.
- 10179160Service Solution for Instructions to Configure Service Viper on Medallion drive clusters.
- 10178945Revised letter is to announce a reimbursement available to dealers for travel to a customer's location to perform a recall or field service campaign. Potential travel reimbursement applies to DTNA truck dealers and Detroit Diesel distributors. Thomas Built Buses will be addressed separately.
- 10178006Important Campaign Information letter announcing Dealer Travel for Campaign Performance. This letter is to announce a reimbursement available to dealers for travel to a customers location to perform a recall or field service campaign.
- 10177979Warranty Information Letter for OWL and Warranty Manual Improvement: Sublets and Travel Time/Distance. In the spirit of continuous improvement, DTNA reviewed sublet-related policies and procedures. The goal was to improve language clarity and optimize processes.
- 10177838Warranty Information Letter informing that to ensure that DTNA policies and service network practices align, the Warranty Department will be revising the Warranty Manual.
- 10177691OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
- 10177690Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLink 8.12 Standard and Professional is available to download from the Detroit Diesel server.
- 10177657Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
- 10176790Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
- 10174376Warranty Information Letter for Warranty Training Online. DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.
- 10174061Warranty Policy Letter for Chassis Progressive Damage Policy Change. Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).
- 10174060Warranty Policy Letter for Handling for Authorized Service Location Part Transfers. To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program
- 10174052Warranty Policy Letter for Handling Change: Over the Counter Aftermarket Parts Replacement Program. DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.
- 10172649Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLink 8.11 Standard and Professional will be available for download from the Detroit Diesel server.
- 10172579Open recall and Field service Campaigns report send out to Dealers, General Managers, Service managers and warranty managers.
- 10172547Warranty Policy Letter explaining the Warranty Department is aligning with the frame rail repair policy, published in DTNA Workshop Manuals, which states that there are very few cases in which welding a heat-treated frame rail is allowed. Therefore, before welding anything on a frame rail, contact the applicable regional service representative for approval.
- 10171361Service Bulletin for Guidelines for Repairing or Replacing an Electrical Harness. Use the guidelines in this bulletin to determine if a damaged electrical harness should be repaired or replaced.
Every Fccc Xcm model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.