2013 Ford C-Max
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › C-Max › 2013
These records cover every 2013 Ford C-Max. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2013 Ford C-Max. Newest first.
Ford Motor Company (Ford) is recalling certain 2013-2019 Escape, 2013-2018 C-Max, 2013-2016 Fusion, 2013-2021 Transit Connect, and 2015-2018 Edge vehicles. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Risk and remedy
Risk
A damaged or missing bushing may prevent the vehicle from shifting into the intended gear, and cause the vehicle to move in an unexpected direction. Additionally, the vehicle may roll after the driver selects the 'Park' position. Either scenario increases the risk of a crash or injury.
Remedy
Dealers will replace the under hood shift bushing and add a protective cap over the shift cable bushing, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed July 1, 2022. Remedy parts are expected to be available in 4th Quarter 2022. Owner notification letters were mailed October 27, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S43.
Ford Motor Company (Ford) is recalling certain 2011-2014 Fiesta, 2013-2014 Fusion, 2015 Mustang, 2013-2015 Escape and C-Max, 2012-2015 Focus, 2014-2016 Transit Connect, 2013-2014 Lincoln MKZ, and 2015 MKC vehicles. These vehicles were previously recalled and repaired under recalls 15V-246, 16V-643 or 17V-210, however the repair may not have been completed…
Risk and remedy
Risk
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Remedy
Ford will notify owners, and dealers will inspect the latch date codes to confirm if the repair was done correctly, and replace the side door latches if necessary, free of charge. Owners will also have the option to inspect their own vehicle's door latches and enter the date codes into a website to determine if the latches are correct. Owner notification letters were mailed on July 27, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S30.
Ford Motor Company (Ford) is recalling certain 120V Convenience charge cords that were supplied with and sold for use with 2013-2015 Ford C-Max Energi and Fusion Energi vehicles and 2012-2015 Ford Focus Electric vehicles. Cords with part numbers FM58-10B706-AA, FM58-10B706-AB, FM58-10B706-AC, FM58-10B706-AD, FM58-10B706-AE and FM58-10B706-AF were…
Risk and remedy
Risk
An overheated cord can increase the risk of a fire.
Remedy
Ford will notify owners, and dealers will replace the current cord with a new 120V convenience cord with a thermistor, free of charge. The recall began January 18, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S24.
Ford Motor Company (Ford) is recalling certain model year 2012-2015 Ford Focus, 2013-2015 Ford Escape and Ford C-MAX, 2015 Lincoln MKC and Ford Mustang, and 2014-2016 Ford Transit Connect vehicles. A component within the door latches may break, preventing the doors from latching and/or leading the driver or a passenger to believe a door is securely closed…
Risk and remedy
Risk
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Remedy
Ford will notify owners, and dealers will replace the door latches with an improved part, free of charge. The recall began on January 27, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S30.
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford C-Max vehicles manufactured January 19, 2012, to November 21, 2013; Ford Fusion vehicles manufactured February 3, 2012, to August 24, 2013; Ford Escape vehicles manufactured October 5, 2011, to November 1, 2013; and Lincoln MKZ vehicles manufactured April 25, 2012, to September 30…
Risk and remedy
Risk
The short circuits could cause the frontal air bags, side curtain air bags and the seat belt pretensioners to not function as intended when needed, increasing the risk of occupant injury in the event of a crash.
Remedy
Ford will notify owners, and dealers will replace the RCM, free of charge. Parts are not currently available. The recall began on May 26,2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S21.
Ford Motor Company (Ford) is recalling certain model year 2013-2014 C-MAX, and Escape vehicles. In the affected vehicles, the restraint control module (RCM) may have errors in the programming software which may result in a delayed deployment of the side-curtain rollover air bag.
Risk and remedy
Risk
If the side-curtain rollover air bag is delayed in deploying in certain rollover circumstances, the risk of injury to the passengers is increased.
Remedy
Ford will notify owners, and dealers will reprogram the RCM, free of charge. The recall began on May 30, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S04.
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured August 15, 2012, through September 10, 2013, 2013-2014 Ford Escape vehicles manufactured June 5, 2012, through August 12, 2013, and 2013-2014 Ford C-Max vehicles manufactured from July 23, 2012, through May 28, 2013. The driver and…
Risk and remedy
Risk
The back of the subject seats may become loose or lean while driving and potentially increase the risk of injury in certain crashes.
Remedy
Ford will notify owners, and dealers will replace the seatback, free of charge. The recall began on May 30, 2014. Owners may contact Ford at 1-800-392-3673. Ford's number for this recall is 14C03.
Ford Motor Company (Ford) is recalling certain model year 2012-2013 Focus Electric vehicles and 2013 C-Max vehicles equipped with the Intelligent Access Push Button Start System. In the affected vehicles, there is no audible chime when the vehicle is operational and the driver's door is opened. Thus, these vehicles fail to conform to Federal Motor Vehicle…
Risk and remedy
Risk
Without an audible door chime, a vehicle owner may open the door and exit the vehicle without being reminded that the vehicle is still operational, leaving the vehicle susceptible to theft.
Remedy
Ford will notify owners, and dealers will update the software for the door chime, free of charge. The recall began on October 30, 2013. Owners may contact the Ford customer relationship center at 1-866-436-7332. Ford's recall number is 13C07.
Owner complaints
187 complaints4 involved a crash5 involved a fire2 injuries
What owners report most
Latest complaints
- Electrical system · Power train · Vehicle speed control
Summary of Safety Issue The vehicle repeatedly experiences sudden loss of propulsion while driving, accompanied by a “Stop Safely Now” warning message and various other dashboard warnings . During these events the accelerator pedal becomes completely unresponsive while the vehicle remains powered…
Summary of Safety Issue The vehicle repeatedly experiences sudden loss of propulsion while driving, accompanied by a “Stop Safely Now” warning message and various other dashboard warnings . During these events the accelerator pedal becomes completely unresponsive while the vehicle remains powered, indicating a failure of the hybrid propulsion system or high-voltage battery control system. The vehicle and video footage of the failure are available for inspection upon request. Timeline of Events January 13, 2026 – The vehicle displayed a “Stop Safely Now” warning message and lost the ability to accelerate. The vehicle had to be towed to Lehighton Ford. January 21, 2026 – Paid $866.85 for repairs including battery service, Rear Control Module replacement, and PCM harness repair. Lehighton Ford stated the vehicle was repaired and safe to drive. Within minutes of leaving the dealership, the vehicle stalled again in active traffic and had to be returned. The issue was escalated to the Ford Engineering hotline and a Field Service Engineer. February 17, 2026 – The dealership attempted to return the vehicle after performing a BECM reprogramming. Upon pickup, new issues were immediately observed including near-stall conditions and hybrid system malfunction, so the vehicle was left with the dealership again. February 18, 2026 - The owner brought forth concerns about Ford’s Technical Service Bulletin (TSB) 17-0015 which identifies potential damage to the traction battery interlock harness as a root cause for intermittent stalling and "Stop Safely Now" warnings. Although the dealership recorded Diagnostic Trouble Code B11D8—a fault directly related to the stall condition—the dealership later stated that no diagnostic codes relevant to the TSB were present and this component was not inspected. February 20, 2026 - Dealership claims that the vehicle has been test-driven for over 100 miles and is “functioning perfectly” and that a ‘battery rebalance’ was causing the issues experie
- Structure › Body · Unknown or other
The rear impact bar is completely disintegrated and is falling off of the subframe due to extreme rust. There is either no or very little amount of rust on the entirety of the rest of the vehicle. The impact bar is either manufactured with incorrect materials or is otherwise defective. The impact…
The rear impact bar is completely disintegrated and is falling off of the subframe due to extreme rust. There is either no or very little amount of rust on the entirety of the rest of the vehicle. The impact bar is either manufactured with incorrect materials or is otherwise defective. The impact absorber is attached to the impact bar and due to the integrity of the impact bar being destroyed, the crumple zone in the rear of the vehicle will not work as intended and the safety systems would not perform as intended. The impact absorber is not sitting correctly as attached to the impact bar and major portions of the impact bar are missing due to extreme rust. This is currently available for inspection but is going to be repaired soon. A review of forums, like Reddit, online reveal that other owners of this generation of Cmax have had rusted out impact bars in the rear and have failed state safety inspection. This vehicle was never in an accident.
- Unknown or other
Rear view camera display is upside down. Display was normal when the vehicle was purchased and then one day it flipped upside down and all overlay information disappeared (lines and distance indicators).
- Electrical system · Engine · Service brakes
I took it to the Ford dealership and they diagnosed it as having a parasitic draw from the 12 V battery when the car is shut down so when you go to get into the car if the battery is dead, they will fix it for $425 however, this problem was a recall in 2013 and my car did have a recall done to it.…
I took it to the Ford dealership and they diagnosed it as having a parasitic draw from the 12 V battery when the car is shut down so when you go to get into the car if the battery is dead, they will fix it for $425 however, this problem was a recall in 2013 and my car did have a recall done to it. However, the issue is still going on therefore I feel as though the customer should not be charged. My car broke down going up the canyon and it told me to pull over safely, which I did going up the hill, but it was on an exit and it was a dangerous situation as I could not even turn on my flashers. This has been a known issue with the Ford C max since 2013 and since their software program then did not correct the problem and now they want to update the software why should the cost come from the Consumer?
- Unknown or other
The backup camera always quits working while in the middle of reversing. It will work for a second, but then the display will flip upside down or go completely black and display a message saying "Camera unavailable. Please contact your dealership." It started doing this about a year ago, but was…
The backup camera always quits working while in the middle of reversing. It will work for a second, but then the display will flip upside down or go completely black and display a message saying "Camera unavailable. Please contact your dealership." It started doing this about a year ago, but was intermittent. It started happening more often over time, and now it always happens. It makes reversing dangerous, as the camera will quit working while the vehicle is still moving. This is especially dangerous in parking lots where there are pedestrians around. It is available for inspection upon request. It has not been inspected by anyone yet.
- Engine
Engine light came on. Mechanic said 2 codes showed up. One for low coolant, another for engine misfiring. The misfiring code had come on several times in past and spark plugs were replaced. Upon inspection was told the engine block is cracked due to faulty design. I will need a new engine!
- Unknown or other
The rearview camera is usually upside down. Occasionally, a blank, black screen is displayed. Infrequently, it appears normal. A few times, a message is displayed saying it needs to be replaced. In view of the fact many models have a recall notice for this very problem, I elected to report it.
- Steering
Steering stopped working but after restarted it began to work again. It was fine for a few days and then DTC came up indicating "Service Power Steering" and the power steering has quit working.
- Steering
While driving car, power steering will fail and deactivate leaving the steering extremely heavy and manual. Can happen at any speed, and has happened on the interstate at highway speeds. Information cluster states, "power steering fault - service power steering immediately" When this happens it…
While driving car, power steering will fail and deactivate leaving the steering extremely heavy and manual. Can happen at any speed, and has happened on the interstate at highway speeds. Information cluster states, "power steering fault - service power steering immediately" When this happens it is highly unsafe and happens instantly without warning. Makes getting the car off the road and stopped safely very difficult and dangerous. Stopping the car, turning it off fully and restarting seems to clear the fault and makes the car power steering operate as normal again. But this has happened many times since owning the car and I can find no reason when or why it gets triggered. Online searches find many other owners of this car describing the exact same issue and they share the same concerns about it being unsafe.
- Electrical system · Vehicle speed control
WHILE DRIVING the dashboard instrument panel beeps and flashes the word "Put in Park" and "Stop Safely Now", and the speedometer stops working, all kinds of warning lights start flashing on and off on the instrument panel, the heater goes on and off on it's own, then the instrument panel goes…
WHILE DRIVING the dashboard instrument panel beeps and flashes the word "Put in Park" and "Stop Safely Now", and the speedometer stops working, all kinds of warning lights start flashing on and off on the instrument panel, the heater goes on and off on it's own, then the instrument panel goes black, speedometer shows zero and car goes into shutdown mode. I was put in risk while driving without a speedometer and other vehicles near me were put into risk; when I pull over and stop the vehicle it strands me and I need a tow. This has happened randomly many times; I took it to FORD for repair, they didn't know how to fix the problem, my car was at FORD for 6 weeks! and I was without a car all that time, now 3 months later it's doing the same thing! I have videos of it happening along with the pictures I'm posting here, it is very scary when it's happening while driving and it's scary being stranded in unsafe places having to wait for a tow. This issue is Unresolved and DANGEROUS, I need FORD to get more involved.
- Steering
Got a “Power steering assist fault” message on the screen. It was very hard to steer the wheel. The case on the wheel was turning around it. Managed to drive 3 more miles to the dealership. A lot of other ford models have same issues, even under 50.000 miles. And many of the are in recall program…
Got a “Power steering assist fault” message on the screen. It was very hard to steer the wheel. The case on the wheel was turning around it. Managed to drive 3 more miles to the dealership. A lot of other ford models have same issues, even under 50.000 miles. And many of the are in recall program, but not 2013 ford c-max. Can’t afford 3.400$ price for fixing it at the dealership. I’m a second owner, bought it for 5.000 , 3 years ago. At least it didn’t stuck completely, and I didn’t Die
- Electrical system
My Stereo/Navigation console went out, just went black and stopped working. I bought it to my local garage and they said it was a costly repair and that there is a recall/service bulletin on it and that i should take it to a Ford Dealer. I did and they acknowledged the issue but said my VIN wasn't…
My Stereo/Navigation console went out, just went black and stopped working. I bought it to my local garage and they said it was a costly repair and that there is a recall/service bulletin on it and that i should take it to a Ford Dealer. I did and they acknowledged the issue but said my VIN wasn't covered, but it was a known issue with C-Max of this year. So I didnt have the car services. A few months later, (2 weeks ago) my battery died and could not be jumped, so I had it towed to my Ford Dealer. He informed me that the potential cause of the battery damage was a short in the Console/Radio/Nav/Screen system. I agreed to go forward with the costly repair... They have so far not been able to resolve the issues. This morning I called Ford and explained the issue. They said since there is not a Recall associated with my VIN, there was nothing they could do. I asked them to look up the "issue" not the VIN and they acknowledged that there are issues with 2013 C-Max Energi models associated with the console. I asked for a bulletin number and was given 202363. I believe the recall is associated with the Ford Parts and so my VIN number may not be registered or something to that effect. I'm not sure how to look up the number they provided. While I dont think that not having a Radio or Nav system is a safety issue. The fact that it has caused the car to completely shut down and standing us is an issue. Again, Ford is aware that this type of issue exists, for this model, for this manufacturing year. They say they will only cover the repair if your agency tells them to, UGH Thank you, [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Vehicle speed control
The wrench 🔧 light came on in my car. and when I put it in drive the car took off without me putting my foot on the gas. and it was like I had no control over the gas pedal. I tried hitting the brakes and it was still wanting to accelerate.
- Tires
225/57/17 driving down the interstate and the tire blew
- Steering
On the morning of 12/13/23 I got in my car to go to work. Upon starting my car the warning light for service power steering came on. I noticed the car was very hard to steer when existing my drive way. I drove the car back into my neighborhood to see if it was safe to drive in traffic. The steering…
On the morning of 12/13/23 I got in my car to go to work. Upon starting my car the warning light for service power steering came on. I noticed the car was very hard to steer when existing my drive way. I drove the car back into my neighborhood to see if it was safe to drive in traffic. The steering was so tight and steering wheel would fight me wanting to return to center. With the fault code still present I went home and inspected the steering system and hooked up my scan tool to the OBD port. I had a fault code of 3000-53 and 3000-49. The 3000-53 would not clear. I have found online other Fford vehicles with recalls for the same steering system setup, but not on the Ford C Max. If this had happened when I was driving on the road at a high rate of speed it would have caused a serious accident, as the steering was very unresponsive and actually fighting my input of direction.
- Vehicle speed control
I pulled over to take a phone call. The car was in park but idling. When I finished the call, I put the car in drive and released my foot from the brake. The car began to accelerate as if I was pressing the accelerator, but I was not. I checked the make sure there was no obstruction near the…
I pulled over to take a phone call. The car was in park but idling. When I finished the call, I put the car in drive and released my foot from the brake. The car began to accelerate as if I was pressing the accelerator, but I was not. I checked the make sure there was no obstruction near the pedals. There was nothing there, no random object, no floor mat, nothing. I tried to release my foot a few more times and it continued to accelerate without any pressure on the accelerator. I put the car in park, noticed there was a wrench image lit up on the dash and then turned off the car. When I started it again, the wrench was gone and the car drove normally. I called the service center to make an appointment to have the car looked at. The earliest appointment is in 19 days.
- Power train
I have owned this car for the last 9 years and have kept It well-maintained. For over a year, the car stalls in the midst of driving, even on a highway, leaving me the only option to find a shoulder or safe area to park. After I turn off the engine, wait for a few minutes, and turn it back on, the…
I have owned this car for the last 9 years and have kept It well-maintained. For over a year, the car stalls in the midst of driving, even on a highway, leaving me the only option to find a shoulder or safe area to park. After I turn off the engine, wait for a few minutes, and turn it back on, the engine turns on just fine and I am able to drive. Lately (for about a month or so) this has been happening more frequently(every other day, sometimes twice in a short while compared to once every 3-4 weeks). A few months ago I took it to the local Ford dealership and they told me, that they would need to replace the hybrid system, with an estimated cost of $15000, which didn't make any sense as even car is not worth that much. I also called Ford customer service and even they didn't offer much and just told me something to the effect of "tough luck". I came across this post [XXX] which matches exactly with the issue I am experiencing. That particular car owner was able to get the transmission replaced by Ford, under a California law and the issue was resolved. This seems to suggest, that Ford bears the responsibility for this manufacturing fault and they should own up to it. It is not fair that after paying over $35000, for the car, the only options I am given is to either take the risk of a catastrophic accident with the car stalling in the midst of a highway (with no safe place to stop) or just junk the car. I am pleading that your department should make it a required safety recall and Ford should be required to either fix this issue, at no cost to the owners or compensate them fairly for the present value of the car. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Equipment › Mechanical › Carrier/rack
On March 21, after communicating several times with Yakima regarding difficulties I was having in installing the roof rack onto our car, I was able to install the racks, though the tower and clip system for the front rack were uncomfortably at the limit of extension of the drive bolt (the part of…
On March 21, after communicating several times with Yakima regarding difficulties I was having in installing the roof rack onto our car, I was able to install the racks, though the tower and clip system for the front rack were uncomfortably at the limit of extension of the drive bolt (the part of the system that applies the tension that keeps the rack on the car). With the multiple installation attempts and communication with Yakima Consumer Service I am very confident that I installed the rack consistent with Yakima instructions. Following installation the roof racks were not used to transport our kayaks until mid June. On June 16 my wife was driving on the very busy Interstate 5 close to our home in Lynnwood WA when the front rack separated from the car, impacting and damaging the roof on the way off. It was extremely lucky that no vehicle was behind her, and no accident was caused. We found remnants of the front rack on the side of the highway, and there was clear evidence that the rack had been hit by one or more vehicles. I don't know the extent of the damage to those vehicles. I called the Washington State Police to report and ask whether any incident had been reported; none had. The next day I submitted a report to Yakima about the incident. To this date I have not received any response to my report, somewhat surprising since the Consumer Service dept had been very prompt in responding to my previous communications when I was having difficulty installing the racks. Email correspondence with Yakima and photos are attached.
- Unknown or other
The component that failed is the lug nuts. They are swollen. Had them replaced when I got new tires in December, 2022 because mechanic could not use the ones that came with the previous tires. He said I would be driving on broken lug nuts because of how he had to take off the lug nuts that came…
The component that failed is the lug nuts. They are swollen. Had them replaced when I got new tires in December, 2022 because mechanic could not use the ones that came with the previous tires. He said I would be driving on broken lug nuts because of how he had to take off the lug nuts that came with my Ford. On May 17/2023, took my car to A ford dealership for an oil change and inspection. They could not rotate the tire because of the swollen lug nuts.
- Suspension
Description from Ford Dealer is in quotes, plus I added more details: "Rear sub-frame" (F1FZ5035D Cross Member) "broke in half" (due to rusting). "Unsafe to drive at this time." Good thing my wife questioned the new clunking sound that was emanating from the rear of the vehicle when going over…
Description from Ford Dealer is in quotes, plus I added more details: "Rear sub-frame" (F1FZ5035D Cross Member) "broke in half" (due to rusting). "Unsafe to drive at this time." Good thing my wife questioned the new clunking sound that was emanating from the rear of the vehicle when going over bumps. We were able to proactively catch this before it resulted in an accident. I believe these parts should last much longer than 10 years.
- Steering
I went to change lanes and all of a sudden the steering became difficult. I thought the car had lost power, but it was only the steering. The sudden loss came as a surprise and did cause me to loose control momentarily during the lane change. Shortly thereafter a warning light came on indicating…
I went to change lanes and all of a sudden the steering became difficult. I thought the car had lost power, but it was only the steering. The sudden loss came as a surprise and did cause me to loose control momentarily during the lane change. Shortly thereafter a warning light came on indicating the power steering needed to be serviced. I was able to arrive at my destination safely, but power steering was completely out. Upon restarting the car the problem went away. Returning home later that evening the problem returned about 5 miles into my trip. I returned home and shortly after brought the car to the auto parts store to see if there was a code on their scan tool. No codes, but this time when the car was started the warning light came on immediately and power steering has quit working 100% of the time.
- Electrical system
Several times over the past 3 years, the 12 volt battery has been deeply drained while the car has been off/unused for ~3 days. (The problem has been described on your website: https://static.nhtsa.gov/odi/tsbs/2016/SB-10093862-2532.pdf.) This is a safety issue because there is a reasonable…
Several times over the past 3 years, the 12 volt battery has been deeply drained while the car has been off/unused for ~3 days. (The problem has been described on your website: https://static.nhtsa.gov/odi/tsbs/2016/SB-10093862-2532.pdf.) This is a safety issue because there is a reasonable expectation of serviceability of a car, for emergencies or for returning to a safe place. Just as one depends on the reasonable reliability of devices like fire extinguishers, elevators, heart monitors, etc., so does one expect cars to be reasonably reliable. There is no advance warning that the battery will be drained.
- Electrical system · Engine and engine cooling · Visibility/wiper
The contact owns a 2013 Ford C-Max. The contact stated while driving approximately 70 MPH in the rain, the windshield wipers became inoperable, and the headlights inadvertently turned off. The contact stated that the horn would beep independently but failed to operate while depressed. Additionally…
The contact owns a 2013 Ford C-Max. The contact stated while driving approximately 70 MPH in the rain, the windshield wipers became inoperable, and the headlights inadvertently turned off. The contact stated that the horn would beep independently but failed to operate while depressed. Additionally, the heater and A/C unit became inoperable. The vehicle was taken to the local dealer where it was diagnosed and determined that the battery needed to be replaced. The vehicle was repaired but the failure persisted. The vehicle was taken to the local dealer where it was diagnosed and determined that the wiring harness needed to be replaced. The vehicle was not repaired. The contact stated that the vehicle also failed to start. The contact had to jump start the vehicle on several occasions. The manufacturer was not contacted. The failure mileage was approximately 110,000.
- Unknown or other
My vehicle fails to properly turn off after it has been put into park. As a result, I believe the regular battery is being drained at an alarming rate. If my vehicle sits overnight 8-10 hours, it is very likely that the battery will be dead and the car doors will not open. At first I thought it was…
My vehicle fails to properly turn off after it has been put into park. As a result, I believe the regular battery is being drained at an alarming rate. If my vehicle sits overnight 8-10 hours, it is very likely that the battery will be dead and the car doors will not open. At first I thought it was just a manufacturer error with the batteries, but once I had purchased three batteries in less than 6 months. At this point, It seems to be an electrical draw issue that I am uncertain how to resolve as these cars are barely 10 years old.
- Steering
I started the car and could not move the steering wheel without great great effort. “Power steering failure” notice appeared on dashboard.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Door Latch Failures
In December 2019, the Office of Defects Investigation (ODI) opened this investigation based on 235 Vehicle Owner Questionnaires (VOQs) alleging doors failed to latch when closed, and/or inadvertently opened while driving, on model year (MY) 2012-2014 Ford Fiesta, and 2013-2014 Fusion and Lincoln MKZ. Some VOQs…
In December 2019, the Office of Defects Investigation (ODI) opened this investigation based on 235 Vehicle Owner Questionnaires (VOQs) alleging doors failed to latch when closed, and/or inadvertently opened while driving, on model year (MY) 2012-2014 Ford Fiesta, and 2013-2014 Fusion and Lincoln MKZ. Some VOQs reported the failure occurred after the latch had been remedied under a prior recall which involved fracture of the latch pawl spring tab due to thermally induced cyclic fatigue. Other VOQs alleged a similar failure in vehicles not previously recalled. A latch with a fractured pawl spring tab typically results in a ?door will not close? condition, however in certain somewhat rare circumstances, may result in the door coming open while driving. In response to ODI?s investigation, Ford has announced three field actions, as discussed below.On March 23, 2020, Ford submitted Safety Recall 20V-177 (Ford 20S15), a regional recall campaign to address door latch failures in vehicles not previously recalled under Safety Recalls 15V-246, 16V-643 and 17V-210. The recall affects vehicles currently or ever registered in certain high ambient temperature states (see 20V-177 for affected states). As a remedy, Ford will replace all four door latches free of charge.On August 24, 2020, Ford issued a non-safety regional field action (Ford 20R01) to address door latch failures on the same model/MY vehicles not covered under 20V-177 (i.e., not currently/ever registered in affected states). According to Ford, spring tab failure rates for vehicles covered by this action are about half that of the 20V-177 vehicles. Under this action, dealers will replace all door latches, free of charge, if either; a) the vehicle exhibits a related latch concern, or b) if the vehicle owner expresses a concern about the latches in their vehicles. Details can be found under NHTSA TSB No. 10190990, a copy of which is available in this investigative file available at NHTSA.gov.On June 8, 2020, Ford submitted Safety Recall 20V-331 (Ford 20S30) addressing vehicles previously remedied under NHTSA Recalls 15V-246, 16V-643 and 17V-210, where the repair may not have been properly completed, specifically not all of the door latches were replaced, or replaced correctly. This recall involves an inspection of the latches, with the option for a consumer self-inspection; owners could view the date codes on their latches (and confirm child safety locks are present on the rear doors) and then submit the information to Ford?s mobile app or website. A dealership inspection option was also available. Any vehicle found to have unreplaced defective latches requires the replacement of all door latches as directed by Ford.Regarding the 4,494 reports cited above, 1,485 involve scope-related failures (with 13% alleging door opening), and the remaining 3,009 reports involving remedy concerns (with 18% alleging door opening - note ODI was unable to verify the allegations of door opening). The three ODI injuries were all relatively minor. Ford?s reported injury incidences include one (unconfirmed) report of an ejection, three minor injuries with the others involving undisclosed injuries. Ford?s crashes involved two (unconfirmed) crashes alleging the incident door contacted another vehicle and three involving doors striking other property.The recalled vehicles include MY 2011-2015 Ford Fiesta, 2013-2016 Ford Fusion and Lincoln MKZ, 2015 Ford Mustang and Lincoln MKC, 2013-2015 Ford Escape and Ford C-MAX, 2012-2015 Ford Focus and 2014-2016 Ford Transit Connect.Ford's actions address ODI's concerns at this time. ODI will take further action if warranted by new information. The reference (OD
- Door Latch Failure
In January, the Office of Defects Investigation (ODI) opened this Preliminary Evaluation based on consumers' allegations of doors failing to latch and/or inadvertently opening on model year (MY) 2012-2013 Ford Focus vehicles (subject vehicles).ODI has received 464 unique reports related to the alleged problem, with…
In January, the Office of Defects Investigation (ODI) opened this Preliminary Evaluation based on consumers' allegations of doors failing to latch and/or inadvertently opening on model year (MY) 2012-2013 Ford Focus vehicles (subject vehicles).ODI has received 464 unique reports related to the alleged problem, with over 200 claiming that the door(s) opened inadvertently while the vehicle was in motion.One consumer alleged an injury that occurred while driving when a door inadvertently opened and then closed on a child's arm.Another alleged that a door that inadvertently opened struck a parked vehicle.In response to ODI's information request, Ford Motor Company (Ford) provided 500 unique reports related to the alleged problem on the subject vehicles.Ford reported no injury or accident claims.Ford also submitted 1,513 warranty claims related to door latch failures.Many customers indicated that the affected door could not be latched at all and some of them decided to restrain the door by other means in order to operate the vehicle.Some customers also reported door latch failures occurring on multiple doors and at different times.Additionally, Ford stated that MY 2014-2015 Ford Focus, 2013-2015 Ford Escape, 2013-2015 Ford C-Max, 2014-2016 Ford Transit Connect, 2015 Ford Mustang, and 2015 Lincoln MKC, all use the same door latch as the 2012-2013 Ford Focus.On September 6, 2016, Ford notified ODI that it would conduct a safety recall (16V-643) to remedy the door latches in the MY 2012-2015 Ford Focus and other Ford models mentioned above (total of approximately 2 million vehicles).According to Ford, a component within the door latch may break preventing the door from latching.Ford dealers will replace all four door latches in the recalled vehicles with a new more robust latch design that is currently in production.The recall action initiated by the manufacturer appears to address the safety risks.Accordingly, this investigation is closed.The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the identification (ODI) numbers found in the attached list.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10225458Some 2013-2020 Fusion, MKZ and 2013-2018 C-Max vehicles equipped with an HF35 transmission may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park.
- 10218617Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with 8 inch or larger center display screen may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Pop-up will be displayed on the center display screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, return odometer, fuel information, or vehicle location incorrect in the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.
- 10214758Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with SYNC screens 8 inch or larger may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Popup will be displayed on SYNC infotainment screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, and return odometer and fuel information to the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.
- 10212957Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
- 10211728Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2020-2022 Escape, 2021-2022 Corsair, 2022 Maverick vehicles equipped with HF35/HF45 hybrid transmissions can now be disassembled to repair and clean any contamination that may have been the result of a differential or transfer shaft bearing failure and the transmission can be overhauled/rebuilt. Service tools and service parts are now available. Refer to the Workshop Manual, Section 307-01.
- 10210730Some 2013-2016 Fusion, 2013-2018 C-MAX, 2014-2019 Escape, 2014-2021 Transit Connect, and 2015-2018 Edge vehicles may indicate an incorrect shifter lever position. This may be due to the bushing at the transmission end of the shifter lever cable resulting in a mismatch of cluster and selected gear position. To correct the condition, follow the Service Procedure steps to replace the bushing and on certain vehicles install the protective cap over the selector at the transmission end of the selector lever cable.
- 10209209This article supersedes TSB 21-2236 to update the models and year affected. Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2022 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2022 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2022 F-Super Duty, 2018-2022 EcoSport/Expedition, 2019-2022 Ranger/Nautilus, 2021-2022 Bronco/Bronco Sport/Mustang Mach-E, 2022 Maverick vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
- 10204994Online automotive service information system for March 2016
- 10203850Various 2012-2015 vehicles equipped with a 3G modem may experience a lack of 3G modem performance. This may be due to the 3G cellular service functionality being decommissioned starting August 2021 and through March 2022. As the 3G cellular service is decommissioned, vehicles equipped with the 3G telematics control unit (TCU) will lose MyFord Mobile and MyLincoln Mobile app functionality/connectivity. Repair or Replacement of the TCU should no longer be performed using existing service stock. Replacement of the 3G TCU for this concern will result in programming concerns and repairs should not be performed.
- 10199536Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2021 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2021 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2021 F-Super Duty, 2018-2021 EcoSport/Expedition, 2019-2021 Ranger/Nautilus, 2021 Bronco Sport/Mustang Mach-E vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
- 10194434Some 2013-2016 Fusion, 2013-2018 C-MAX, 2014-2019 Escape, 2014-2021 Transit Connect, and 2015-2018 Edge vehicles may indicate an incorrect shifter lever position. This may be due to the bushing at the transmission end of the shifter lever cable resulting in a mismatch of cluster and selected gear position. To correct the condition, follow the Service Procedure steps to replace the bushing and on certain vehicles install the protective cap over the selector at the transmission end of the selector lever cable.
- 10189767Some 2013-2016 Fusion, 2013-2018 C-MAX, 2013-2019 Escape, 2014-2021 Transit Connect, and 2015-2018 Edge vehicles may indicate an incorrect shifter lever position. This may be due to the bushing at the transmission end of the shifter lever cable resulting in a mismatch of cluster and selected gear position. To correct the condition, follow the Service Procedure steps to replace the bushing and install the protective cap over the selector at the transmission end of the selector lever cable.
- 10177123Some 2013-2016 Fusion/MKZ/C-MAX vehicles equipped with an HF35 transmission and built on or before 15-Aug-2015 may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park. This may be due to the differential side bearings and/or the transfer shaft and housing. To correct the condition, follow the Service Procedure to install either a transfer shaft kit or a remanufactured transmission assembly.
- 10176123Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.
- 10175895Some 2013-2018 C-Max, 2013-2020 Escape/Fusion/MKZ, 2015-2018 Focus,2015-2019 MKC, 2015-2020 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2020 F-Super Duty, 2018-2020 EcoSport/Expedition, 2019-2020 Ranger/Nautilus vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
- 101719622013-2018 C-Max, 2013-2020 Fusion Hybrid/MKZ Hybrid vehicles may exhibit a MIL with Diagnostic Trouble Code (DTC) P0340 and/or P0344. This may occur due to excessive moisture build up in the engine oil. Excess moisture occurs when the vehicle is driven short distances and/or less than 6,000 combined miles per year. To correct the condition, replace the camshaft position sensor (CMP) and change the engine oil. Advise the customer to perform more frequent oil changes and allow the internal combustion engine to reach operating temperature when running to prevent reoccurrence. Refer to the owners guide - maintenance - engine oil check - operating in cold climates and short driving cycles.
- 10170901Some 2013-2016 Fusion, MKZ and C-MAX vehicles equipped with an HF35 transmission and built on or before 15-Aug-2015 may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park. This may be due to the differential side bearings and/or the transfer shaft and housing. To correct the condition, follow the Service Procedure to install either a transfer shaft kit or a remanufactured transmission assembly.
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10164497For Ford and Lincoln vehicles that require positive or negative battery terminal replacement, it is not necessary to replace the complete battery cable harness (14300 and 14301) for this concern. Positive battery cable clamp BT4Z-14450-AA and negative battery cable clamp BT4Z-14450-BA are available for this type of repair. Do not cut or shorten the battery cable, instead carefully remove the affected battery cable clamp and clean the cable end as necessary to preserve wire length. Some rework may be necessary for some vehicle environments. Bend the new positive battery cable clamp as needed and crimp it to the existing battery cable. Make sure to use heat shrink tubing over the battery cable to battery cable clamp connection. Obtain the heat shrink tube locally.
- 10162068Some 2013-2017 C-Max/Fusion/MKZ Hybrid/Energi vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P1450, P0456, P0457, P04EE and/or P04EF. This may be due to the sealing capability of the canister purge valve. To correct the condition, follow the Service Procedure steps to update the PCM software and replace the canister purge valve.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10159489Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S. dealership free of charge with shipments completed 19-Apr-2019 (reference EFC07013 on FMCDealer.com). This tester will help reduce the potential for misdiagnosis and unnecessary compressor replacement. Make sure that this tester is used for warranty repairs and document the test results in the Technician Comments field. Refer to the Rotunda catalog for a video and user manual which provide detailed operating instructions.
- 10156874Some 2013-2019 Fusion/MKZ and 2013-2018 C-Max vehicles with 2.0L HEV/PHEV engine may exhibit multiple drivability or electrical concerns with one or more diagnostic trouble codes, being the most common P26C3, P26CA, P26D0, P2800, P2802, U019F and U0284. On Fusion/MKZ inspect connectors C146, C1651, C1812, C168C, C1717 and C134 for signs of water entry or corrosion. On C-Max, inspect connectors C134, C140, C144, C1651, C1717 and C1812 and service as necessary. NOTE: Connector C1717 is only equipped on PHEVs for both Fusion and C-Max.
- 10155562Some 2013-2019 Fusion/MKZ and 2013-2018 C-Max vehicles with 2.0L HEV/PHEV engine may exhibit multiple drivability or electrical concerns with one or more diagnostic trouble codes, being the most common P26C3, P26CA, P26D0, P2800, P2802, U019F and U0284. On Fusion/MKZ inspect connectors C146, C1651, C1812, C168C, C1717 and C134 for signs of water entry or corrosion. On C-Max, inspect connectors C134, C140, C144, C1651, C1717 and C1812 and service as necessary. NOTE: Connector C1717 is only equipped on PHEVs for both Fusion and C-Max.
- 10153975Some 2013-2018 C-MAX, 2013-2019 Fusion Energi, and 2017-2019 Fusion/MKZ Hybrid vehicles may exhibit an illuminated MIL with diagnostic trouble code (DTC) P04B5. This may be due to inadvertent actuation of the fuel door release button by the customer when exiting the vehicle. If the fuel filler door is not fully closed after a refueling event or the fuel filler door is open from erroneously pressing the fuel door release button, a message displays during the third drive cycle to indicate the fuel filler door is not closed and the DTC sets. Before performing Workshop Manual (WSM) diagnosis, consult the customer about the potential for accidental fuel door actuation and explain the need to fully latch the fuel door after every refueling event. Malfunction Indicator Lamp will turn off after (3) drive cycles with fuel filler door closed.
- 10153969Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
- 10153931Some 2013-2018 C-Max, 2013-2019 Escape/Fusion/MKZ, 2015-2018 Focus, 2015-2019 Edge/F150/MKC/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017 Super Duty, 2018-2019 EcoSport/Expedition, and 2019 Nautilus vehicles may experience seat pan looseness, lateral movement, or clunk/thump noise on turns. Follow the Service Procedure steps to correct the condition.
- 101524682013 2018 C-Max, Fusion, and MKZ Hybrid vehicles using SOBDM-C module connectors do not require electrical/dielectric grease. If used it may induce module communication concerns. Codes present may be U0293 and a P0AA6. The Workshop Shop Manual (WSM) does not state to use it on these module connectors.
- 10149751Some 2013-2017 Fusion Energi and C-Max Energi vehicles may exhibit an illuminated MIL with DTC P0C27 and/or P0C28. Follow the Service Procedure steps to correct the condition.
- 10148717Some 2013-2016 Fusion, MKZ and C-Max vehicles equipped with an HF35 transmission and built on or before 15-Aug-2015 may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park. Follow the Service Procedure steps to correct the condition.
- 10144217Some 2013-2018 Fusion Energi, 2012-2018 Focus Electric and 2013-2017 C-MAX Energi vehicles equipped with a TCU built on or before 11-Oct-2017 may exhibit a discharged battery, inoperative remote features via MyFord Mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If U0198 DTC still remains, remove the TCU fuse for 5 minutes then reinstall. Reprogram the TCU using IDS or Ford J2534 Diagnostic Software (FJDS) release 110.03 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 10137110Some 2013-2017 Fusion Energi, 2012-2017 Focus Electric and 2013-2017 C-MAX Energi vehicles equipped with a TCU built on or before 11-Oct-2017 may exhibit a discharged battery, inoperative remote features via MyFord Mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If U0198 DTC still remains, remove the TCU fuse for 5 minutes then reinstall. Reprogram the TCU using IDS or Ford J2534 Diagnostic Software (FJDS) release 108.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual
- 10137097Some 2012-2017 Focus BEV, 2013-2016 Fusion Energi And 2013-2017 CMAX Energi vehicles equipped with a Telematics Control Unit (TCU) may exhibit inoperative remote features via My Ford Mobile app, discharged battery, incomplete user authorization and/or diagnostic trouble code (DTC) U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If DTC U0198 remains, remove the TCU fuse for 5 minutes then reinstall prior to programming. Perform IDS Network Test and reprogram the TCU using Integrated Diagnostic System (IDS) release 108.05 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual.
- 10137085Some 2012-2018 Focus Electric, 2013-2017 C-Max Energi, and 2013-2018 Fusion Energi plug-in hybrid electric vehicles (PHEV) may exhibit the high voltage (HV) battery failing to charge while connected to the Delphi 120 volt electric vehicle service equipment (EVSE) charge cord. To identify a Delphi EVSE the coupler on the EVSE that connects to the vehicle charge port is solid black. For information on the Delphi EVSE indicator status used for diagnostics, reference High Voltage Battery > Charging the High Voltage Battery in the Owners Guide for a 2018 Fusion Energi. Reference the Convenience Cord Light Emitting Diode (LED) Indicators chart. The Workshop Manual (WSM) is scheduled to be revised at a later date.
- 10137084Some 2013-2017 C-MAX Energi, 2013-2018 Fusion Energi, 2013-2018 C-MAX/Fusion Hybrid/MKZ Hybrid may exhibit a no start with battery energy control module (BECM) diagnostic trouble code (DTC) P0AE5. For 2015-2017 C-MAX Energi refer to the 2014 MY C-MAX Workshop Manual (WSM), Section 414-03A for normal diagnostics. For all vehicles, if WSM pinpoint testing for BECM DTC P0AE5 finds the DC/DC converter control module (14B227), cabin coolant heater (18K463) or A/C compressor (19703) has low high voltage circuit internal resistance, only replace the component found with low internal resistance. It is not necessary to replace the high voltage battery junction (10C666) along with the low resistance high voltage component. The WSM is currently under revision.
Every Ford C-Max model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.