1994 Freightliner FL-60
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Freightliner › FL-60 › 1994
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1994 Freightliner FL-60. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
4 recalls name the 1994 Freightliner FL-60. Newest first.
Vehicle description: heavy duty truck. the shoulder bolt which holds the grote turn signal switch case and components together can loosen resulting in the turn signal malfunctioning.
If the turn signal function IS lost, following motorists would not be aware of the turning vehicle, increasing the risk of a vehicle crash.
Dealers will inspect these vehicles and tighten any loose bolts and in the turn signal switch within 2 years from the date of the recall notification letter. the shoulder bolt will be removed, cleaned, and reinstalled with loctite. owners can also request loctite and repair instructions so they can fix the vehicles themselves.
The parking brake lever may not travel far enough over center to assure that it remains in the proper position allowing the vehicle to roll away while parked.
If the vehicle IS not properly parked with the transmission in the correct position, and if the vehicle IS parked on a grade, it could unintentionally roll away increasing the potential for an accident.
Dealers will remove and replace the parking brake lever with a lever that requires a 25 lb. Effort to release.
Air system blockage in the air dryer occurs degrading the moisture removing capabilities of the dryer when the vehicle IS operated in a cold environment and moisture accumulates and freezes in the air dryer or in the line between the dryer and the air system reservoir. The air dryer can become over pressurized causing the air dryer cartridge to separate…
If the air dryer separates from the base, the cartridgecan separate sufficiently enough to cause personal injury or property damage.
Dealers will equip air systems with a pressure relief valve to be located between the compressor and the air dryer. This pressure relief valve IS intended to vent if excessive pressure develops in the air dryer.
The brake chamber mounting studs can loosen or pull through due to fatigue in the brake chamber housing caused by foundation brake chatter.
This condition can result in loss of braking capability.
Dealers will change the brake lining materials, replace the wing bracket with a reinforced bracket and install brake chambers with reinforced chamber housing and larger (1/2") mounting studs.
A crack was discovered above the differentials on the chassis. Manufacturer has been notified. Please provide further information. Ts
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.