1994 Freightliner Flb
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Freightliner › Flb › 1994
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 1994 Freightliner Flb. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
5 recalls name the 1994 Freightliner Flb. Newest first.
Vehicle description: heavy duty truck. the shoulder bolt which holds the grote turn signal switch case and components together can loosen resulting in the turn signal malfunctioning.
If the turn signal function IS lost, following motorists would not be aware of the turning vehicle, increasing the risk of a vehicle crash.
Dealers will inspect these vehicles and tighten any loose bolts and in the turn signal switch within 2 years from the date of the recall notification letter. the shoulder bolt will be removed, cleaned, and reinstalled with loctite. owners can also request loctite and repair instructions so they can fix the vehicles themselves.
Vehicle description: heavy duty trucks equipped with horton fan drives. the fan drive control system was reconfigured which resulted in a significant increase in the demand for fan activation and associated stress to electrical and mechanical components. various component failure models, combined with characteristics of the fan clutch and its bearings…
If the fan IS locked, the the system calls for the fan to be on, the fan clutch will slip, generate heat, and unless released, will result in a fire.
Dealers will replace the fan clutch drive disc with one that incorporates a thermally activated pressure relief.
The glass in the swing-out side window can separate from the window frame.
The glass separating from the frame can cause personal injury or a hazard to other vehicles if separation occurs while the truckis in motion.
Dealers will replace the swing-out side windows with a side window retained by adhesive.
Air system blockage in the air dryer occurs degrading the moisture removing capabilities of the dryer when the vehicle IS operated in a cold environment and moisture accumulates and freezes in the air dryer or in the line between the dryer and the air system reservoir. The air dryer can become over pressurized causing the air dryer cartridge to separate…
If the air dryer separates from the base, the cartridgecan separate sufficiently enough to cause personal injury or property damage.
Dealers will equip air systems with a pressure relief valve to be located between the compressor and the air dryer. This pressure relief valve IS intended to vent if excessive pressure develops in the air dryer.
A larger than specified screw was used to mount a power junction stud block to the passenger side of the engine tunnel. The larger screw did not allow adequate clearance between the screw head and the ring terminals which attach to the stud. Contact between the ring terminals and the screw head can cause an electrical short circuit.
Electrical short circuits in the engine compartment can lead to possible fires without prior warning.
Correct size mounting fasteners will be installed to replace the oversize screws. These will be recessed into the mounting block and cannot come into contact with the ring terminals.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.