2023 Genesis G80 Electrified

Recalls

1 recall names the 2023 Genesis G80 Electrified. Newest first.

• Seat belts › Front

  Oct 31, 2022NHTSA 22V81600014,933 vehicles

  Hyundai Motor America (Hyundai) is recalling certain 2023 Genesis G80 Electric, 2021-2022 Santa Fe Hybrid, and 2022-2023 Santa Fe Plug-In Hybrid vehicles. In the event of a crash, the front driver-side and/or passenger-side seat belt pretensioners may explode upon deployment.

  Risk and remedy

  Risk

  An exploding seat belt pretensioner can project metal fragments into the vehicle, strike vehicle occupants, and result in injury.

  Remedy

  Dealers will secure the seat belt pretensioners with a cap, free of charge. Owner notification letters were mailed December 14, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 238/011G. This recall is an expansion of recall numbers 22V-354 and 22V-458.

  Full recall details →

Owner complaints

What owners report most

1. Electrical system1
2. Exterior lighting1
3. Unknown or other1

Latest complaints

• Jun 22, 2023FL
  Electrical system · Unknown or other
  Our 2023 Genesis G80 electrified has been towed three times for the 12v battery or its electrical system. We have yet to drive the Genesis once. It is a safety danger which produces toxic smells in the interior and the trunk plastic gets hot to the touch. The interior was impregnated with the…

  Our 2023 Genesis G80 electrified has been towed three times for the 12v battery or its electrical system. We have yet to drive the Genesis once. It is a safety danger which produces toxic smells in the interior and the trunk plastic gets hot to the touch. The interior was impregnated with the smell as the car was closed. Given the symptoms, the dealership refused to drive the vehicle for service and had it towed due to safety concerns. They attempted repairs three times, finding no error codes or answers the first two times. They returned the dangerous defective vehicle twice. On the third repair attempt, they stated the battery has a short circuit that is causing it to overheat to temperatures over 166 degrees. They also found the accelerator pedal and sensor assembly was out of specifications. Both were replaced, but they have been unsuccessful in getting the smoke/burnt smell out of the vehicle. It has saturated into all of the interior surfaces. Both are extreme concerns for fire risk as well as danger when driving since the accelerator pedal was not working as it should have been.

• May 28, 2023AZ
  Exterior lighting
  When using the I-Pedal feature the brake lights do not come on at any point when lifting off the accelerator pedal gradually. This certainly can cause the vehicle to rear ended if the following car is not paying attention. If you take your foot off the accelerator fully for full regeneration the…

  When using the I-Pedal feature the brake lights do not come on at any point when lifting off the accelerator pedal gradually. This certainly can cause the vehicle to rear ended if the following car is not paying attention. If you take your foot off the accelerator fully for full regeneration the brakes lights do come on. I was following my wife in her Genesis G80 EV and I noticed the brake lights not coming on. I did report it to both Genesis and the dealer but they did not know of any issue or could tell me when the brake lights should come on. This issue has been reported in the following article and it looks like it may be an issue with all the Hyundai Group EVs. https://apple.news/AyymCGI5gTlCa1ZeFW0jAxg

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11011761Certain 2023-2025MY GV70 Electrified (JK1A EV), 2023-25MY GV60 (JW1 EV) and 2023-25MY G80 Electrified (RG3 EV) vehicles may exhibit a condition while driving where the 12V battery voltage drops below the operational voltage and the Vehicle Control Unit (VCU) places the vehicle in Limp Home mode. The VCU software in this bulletin updates the maximum vehicle speeds for various levels of 12V battery voltage when the vehicle enters Limp Home mode.
• 11006825This bulletin provides information to inspect and replace the front or rear wheel bearing hub assemblies for all Genesis vehicles. This procedure is applicable when noise (whirring, roaring, grinding, rumbling, etc.) is present which gets louder when driving with more speed.
• 11006054Certain GV70 Electrified (JK1A EV), GV60 (JW1 EV), and G80 Electrified (RG3 EV) vehicles may exhibit a condition while charging with a 240V AC (Level 2) charger where the vehicle experiences an interrupted charging session or a lower charging speed. This occurs to prevent potential damage to the charging cable connection. Follow the procedure in this TSB to update the software logic for the Vehicle Charging Management System (VCMS), which initiates a self-restart that allows the vehicle charging to return to full capacity once stabilized.
• 10253049Genesis applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10252365Some vehicles may exhibit door unlock malfunctions due to front bumper wiring and fuse disconnections following a collision, stemming from inadequate wiring protection during bumper impacts. This bulletin provides instructions to remove the front bumper and install the enhanced wiring protection measures.
• 10252360Certain 2023-2024MY G80 Electrified (RG3 EV), 2023-2024MY GV60 (JW1 EV), and 2023-2024MY GV70 Electrified (JK1a EV) may have a condition of the power down warning light (turtle symbol) with "Power is limited" displayed in the cluster, and possible DTC P0A2F. If you are servicing a vehicle with either of these conditions, follow this bulletin to inspect the EOP.
• 10252353If you are servicing a vehicle with a missing or damaged insulation cap from the EV Charging Port follow the information in this TSB to replace any missing/damaged insulation cap(s) on certain 2023-24MY GV60 (JW1 EV), G80 Electrified (RG3 EV) and GV70 Electrified (JK1a EV) vehicles. The charging insulation caps are important to ensure proper charger connector orientation and fit to the vehicle charge port.
• 10247603This bulletin is issued to provide the extended battery diagnosis procedure using GDS. This battery diagnosis function displays the various battery-related faults such as: Internal short circuit Battery deterioration Malfunction of electronic parts Insufficient battery charge Normal battery Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.
• 10244962This Vehicle Control Unit (VCU) software package includes the following key VCU updates: Brake light logic update for regenerative braking. o Revised logic to enable brake light actuation during regenerative braking at certain deceleration speeds and during i-Pedal mode driving without the need to press the brake pedal i-Pedal mode operation logic update. Revised i-Pedal operation logic. 12V battery saver logic update allows
• 10244961This updated Vehicle Control Unit (VCU) software package includes the following: Brake light logic update for regenerative braking. i-Pedal mode operation logic update. 12V battery saver logic update allows charging from EV Battery as low as 10% SOC when parked.
• 10243370Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
• 10243366Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
• 10243320This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles.
• 10241820Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
• 10241817Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 DC/DC Converter Input Voltage Sensor Fault. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicles instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
• 10238386This bulletin provides the procedure for updating the software of the Vehicle Charge Management System (VCMS) to improve charging. It may address an intermittent stops charging condition or the following EV Light On DTC condition: DTC P1ABD00 Battery Charger Coupler Temperature Too High
• 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10235565This bulletin describes the procedure to inspect the steering universal joint dust cover for noise, and if necessary, apply grease on certain Genesis vehicles.
• 10230903This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.

Every Genesis G80 Electrified model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.