1999 GMC P32/42
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › GMC › P32/42 › 1999
These records cover every 1999 GMC P32/42. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
1 complaints
Latest complaints
- Service brakes, hydraulic
While driving consumer heard a noise coming from outside of the vehicle. driver pulled over to inspect the vehicle, when without warning ,the vehicle rolled backwards on a slight declining ramp. Consumer was able to jump in to the vehicle to stop it from rolling. Consumer stated that the hydraulic…
While driving consumer heard a noise coming from outside of the vehicle. driver pulled over to inspect the vehicle, when without warning ,the vehicle rolled backwards on a slight declining ramp. Consumer was able to jump in to the vehicle to stop it from rolling. Consumer stated that the hydraulic pump failed. *Ak upon further inspection of the pump the consumer found the fluid contaminated with water and road silt due to a deformed plastic fluid reservoir. the consumer has the old part in his possession. *nm
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248444Vehicle Recalls
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10190934Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190933Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
- 10190932Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10190931Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
- 10010375Service engine soon light and p0300 when towing, cruising uphill or on hard acceleration.