2005 GMC Savana 1500

Recalls

1 recall names the 2005 GMC Savana 1500. Newest first.

• Fuel system, gasoline

  May 19, 2006NHTSA 06E04300088,303 vehiclesEquipment

  Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes…

  Risk and remedy

  Risk

  This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. In the presence of an ignition source, a fire could occur.

  Remedy

  Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1).

  Full recall details →

Owner complaints

What owners report most

1. Air bags2
2. Service brakes, hydraulic2
3. Service brakes1
4. Structure1
5. Tires1

Latest complaints

• May 19, 2014FL46,000 mi
  Air bags · Air bags › Frontal › Sensor/control module

  TL* the contact owns a 2005 GMC savana 1500. the air bag warning light illuminated on the vehicle. the vehicle was taken to a dealer, who stated that the frontal air bag sensor needed to be replaced. the manufacturer was notified of the failure. the vehicle was not repaired. the approximate failure mileage was 46,000.

• Aug 5, 2013CA29,000 mi
  Service brakes
  Foot brake IS not functioning if parked on a grade greater than 8 degrees. As always, foot brake only applied after the gear IS shifted on park. I didn't discover the foot brake IS not properly function until several years after purchase. it seems the foot brake was not adjusted at all before the…

  Foot brake IS not functioning if parked on a grade greater than 8 degrees. As always, foot brake only applied after the gear IS shifted on park. I didn't discover the foot brake IS not properly function until several years after purchase. it seems the foot brake was not adjusted at all before the vehicle left the factory. if I have the gear set on neutral on driveway, only apply the foot brake, vehicle rolls by itself. *tr

• Nov 29, 2010MN56,000 mi
  Service brakes, hydraulic · Tires
  Tl*the contact owns a 2005 GMC savana 1500. While the vehicle was parked, the contact checked the spare tire. While using the jack, the spare tire only came down six inches. The contact was unable to get the spare tire back up again. The vehicle was taken to a local repair shop where the cable was…

  Tl*the contact owns a 2005 GMC savana 1500. While the vehicle was parked, the contact checked the spare tire. While using the jack, the spare tire only came down six inches. The contact was unable to get the spare tire back up again. The vehicle was taken to a local repair shop where the cable was cut to get the spare tire off; it was then placed in the rear of the van. The contact also stated that the brakes functioned poorly; the pedal was very low. The vehicle was taken to an authorized dealer who stated that the brakes worked fine. The vehicle was then taken to a local repair shop where the contact was informed that left sensor on the left front wheel needed to be replaced. The mechanic replaced the hub assembly and replaced the rotor on the rear wheels. The rear plates on the rear wheels were also rusted which caused brake failure. The vehicle was repaired. The failure mileage was approximately 56,000 and the current mileage was approximately 60,000.

• Oct 12, 2010MN64,000 mi
  Service brakes, hydraulic · Structure › Body
  TL* the contact owns a 2005 GMC savana 1500. When the contact examined the vehicle, he found that the spare tire cable was corroded. The cable was cut to remove the spare tire. The rear brake metal cover was also corroded causing rotors and brake pads to fail. The vehicle was taken to a local…

  TL* the contact owns a 2005 GMC savana 1500. When the contact examined the vehicle, he found that the spare tire cable was corroded. The cable was cut to remove the spare tire. The rear brake metal cover was also corroded causing rotors and brake pads to fail. The vehicle was taken to a local repair shop where the rear rotors and brake pads were replaced. The contact planned to call the manufacturer. The failure and the current mileages were approximately 64,000. updated 1/21/11 *cn updated 04/20/11

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010544This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 11008956This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
• 11007208This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 11007091This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
• 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
• 11004761This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
• 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
• 11001321This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
• 11000576This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
• 11000162The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10252735This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
• 10252163XM Audio Traffic And Travel Link Availability And Operation.
• 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
• 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10250347This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
• 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
• 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
• 10248444Vehicle Recalls
• 10247716J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
• 10247681Information On Requests To Add OnStar Bluetooth Option.
• 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
• 10247063A/C Blows Warm Or Poor Performance.
• 10247061J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
• 10246952Programming And Activation Of Replacement OnStar Modules.
• 10246951Programming And Activation Of Replacement OnStar Modules.
• 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
• 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
• 10245950Canadian Customers Unable To Place Calls In The United States
• 10245395This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns.
• 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
• 10244273This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 10244214This informational bulletin provides information for the IPC odometer programming method quick reference guide.
• 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
• 10244200This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
• 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
• 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
• 10242252This technical bulletin provides information and a solution to a condition of Brake Pedal Moves or Self Applies at Full Turns.

Every GMC Savana 1500 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.