2002 GMC Yukon XL 2500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › GMC › Yukon XL 2500 › 2002
These records cover every 2002 GMC Yukon XL 2500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2002 GMC Yukon XL 2500. Newest first.
Certain replacement fuel filters, fram brand name p/n g3727, with date codes x52911 through x60801 sequentially or x600141 and a mexico country or origin marking on the fuel filter housing manufactured from october 18, 2005, through march 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes…
Risk and remedy
Risk
This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. In the presence of an ignition source, a fire could occur.
Remedy
Honeywell will notify owners and replace the fuel filters free of charge. the recall began on october 18, 2006. owners may contact fram customer service at 1-800-890-2075 (option 1).
Owner complaints
7 complaints
What owners report most
Latest complaints
- Service brakes
One of the two steel brake lines between the master cylinder and the ABS module failed upon application of the brakes while the vehicle was in motion, causing a severe brake fluid leak near the ABS module, low brake pedal efficacy, low brake pedal return pressure and substantially increased stopping distance as I maneuvered the vehicle to a safe stopping location. *tr
- Service brakes · Service brakes, hydraulic › Fluid
TL* the contact owns a 2002 GMC yukon XL 2500. The contact stated that brake fluid was leaking from the vehicle. The contact noticed that when the brakes were applied brake fluid would spew out from the brake lines. The vehicle was not taken to the dealer. the manufacturer was not notified of the failure. the approximate failure mileage was 59,000.
- Service brakes
While bleeding the brake system after a brake job the steel brakes lines failed. during the inspection of the steel lines it was found that all the steel lines were rusted severely to the point of failure. failure meaning a large hole in the steel line from rust. all steel lines will have to be replaced. *tr
- Electrical system
2002 GMC yukon XL 8.1 vortec engine turns off. possibly crankshaft position sensor. *Tr
- Engine and engine cooling
The engine can stall intermittently at highway speed without warning. This situation can severely impair high speed steering and braking ability. After stalling engine will not start while coasting it will start normally after coming to a complete stop. *Tr
- Engine and engine cooling
Vehicle stalls while at speed. Has occurred several times. Mechanic finds no problems with engine, cooling system, or fuel system. In each case, vehicle stall resulted in loss of power, power steering and power brakes, creating a dangerous situation. Problem has not been resolved. *tr
- Engine and engine cooling
Ref - pe06016 - vehicle stalls while at speed. has occurred three times. mechanic finds no problems with engine, cooling system, fuel system, but finds a diagnostic code of a crank position sensor failure. in each case, vehicle stall resulted in loss of power, power steering and power brakes…
Ref - pe06016 - vehicle stalls while at speed. has occurred three times. mechanic finds no problems with engine, cooling system, fuel system, but finds a diagnostic code of a crank position sensor failure. in each case, vehicle stall resulted in loss of power, power steering and power brakes, creating a dangerous situation. problem has not been resolved but based on other reports will replace the crank position sensor. *nm
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Trailer hitch receiver failure
Complaint reports allege poor weld quality and/or bending of the subject vehicle original equipment trailer hitch receiver.the agency's investigation included analysis of manufacturer and agency incident reports, review of police reports, analysis of the agency's fatal analysis reporting system, a vehicle owner…
Complaint reports allege poor weld quality and/or bending of the subject vehicle original equipment trailer hitch receiver.the agency's investigation included analysis of manufacturer and agency incident reports, review of police reports, analysis of the agency's fatal analysis reporting system, a vehicle owner survey, inspection of tow vehicles/hitches and analysis of failed parts.incidents of weld failure were rare and associated with very low-speed driving (turning, backing and sudden stopping).incidents of bending were associated with improper trailer hitch adjustment or overloading. A safety-related defect has not been identified at this time and further use of agency resources does not appear to be warranted.accordingly, this investigation IS closed.the closing of this investigation does not constitute a finding by nhtsa that a safety-related defect does not exist.the agency will monitor this issue and reserves the right to take further action if warranted by the circumstances.see document search file for addition information.
- Trailer hitch receiver failure
Gm provided additional data regarding allegations of failure of the trailer hitch.odi reviewed that as well as other data provided by peer manufacturers.based on our review, odi finds the need to further investigate this issue.this preliminary evaluation IS upgraded to an engineering analysis (ea07-013) for further assessment and study of this issue.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010544This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
- 11004761This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10252735This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
- 10252163XM Audio Traffic And Travel Link Availability And Operation.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10251887This bulletin advises the technician of possible location of an internal coolant leak from a specific cylinder head and location.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
- 10248444Vehicle Recalls
- 10247681Information On Requests To Add OnStar Bluetooth Option.
- 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10240344This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
- 10235802This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10235713This bulletin provides information on Warranty Administration Required Operating Procedures - 8 Points (U.S. Only).
- 10234141This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10228888This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10225615This service bulletin provides information on Module Harvesting.
- 10224820This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10222839This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
- 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
Every GMC Yukon XL 2500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.