2003 Harley-Davidson Flht
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Harley-Davidson › Flht › 2003
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2003 Harley-Davidson Flht. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
1 recall names the 2003 Harley-Davidson Flht. Newest first.
On certain dyna, XL, and touring motorcycles, the tail light bulb can fall out of the socket.
The tail light and the brake light become inoperative, which could lead to a crash.
Dealers will replace the bulbs. owner notification began on june 3, 2004. owners should contact harley-davidson at 1-414-342-4680.
2003 harley-davidson flht electra glide standard. my motorcycle experienced a complete and total failure of all electrical systems to include an uncommanded engine failure at freeway speeds of approximately 65 mph at the time of the event. H-D has a faulty design that does not permit the adequate cooling of a 50 amp self resetting circuit breaker located adjacent to the battery located slight aft and above the aft cylinder and cylinder exhaust exposed to extreme heating and inadequate cooling. rider has no instrumentation to show impending electrical failure as the component lacks dangerous temperature warnings. this event occurred at night with the immediate and ultimate loss of all external lighting and engine power. This IS clearly a design defect that needs dot investigation for a recall for mandatory installation of a cooling fan and temperature sensor. rider IS a lifelong rider, former military instructor pilot, current faa aviation safety inspector (operations) with extensive training and experience in aircraft and automotive accident investigation. should this have been an aircraft investigation faa aai-100 would have been urged to mandate and emergency ad to correct the design fault. *Tr
Part failure IS eminent. The inner primary was poorly designed. The lack of a proper bushing has resulted in sever wear and a sloppy fit. The steel shifter shaft passes through the aluminum inner primary cover. The additional of a bushing in the design would prevent this failure. *Tr
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.