2011 Harley-Davidson Flhtc
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Harley-Davidson › Flhtc › 2011
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2011 Harley-Davidson Flhtc. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
2 recalls name the 2011 Harley-Davidson Flhtc. Newest first.
Harley-Davidson Motor Company (Harley-Davidson) is recalling all 2008-2011 Touring, CVO Touring and VSRC motorcycles equipped with anti-lock brakes (ABS), including Road King (FLHR), Road King Police (EFI) (FLHP), Road King Police (EFI) (FLHPE), Electra Glide Standard Police (EFI) (FLHTP), Electra Glide Classic (EFI) (FLHTC), Electra Glide Ultra Classic…
These deposits may cause a valve within the ABS Hydraulic Control Unit to stick, reducing braking ability and increasing the risk of a crash.
Harley-Davidson will notify owners, and dealers will flush the entire brake system with new Platinum Label DOT 4 brake fluid, free of charge. The recall began on February 14, 2018. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson's number for this recall is 0171.
Harley-davidson IS recalling certain model year 2009-2012 touring, cvo touring and trike vehicles manufactured from june 6, 2008, through september 16, 2011. See the above list for the models included in the recall. The rear brake light switch may be exposed to excessive heat from the exhaust system.
The excessive heat may cause the switch to not activate the brake lamp or activate the brake lamp when no brake IS applied and/or cause a brake fluid leak at the brake light switch, affecting rear brake performance. Either condition may increase the risk of a crash.
Harley-davidson will notify owners, and dealers will a install a rear brake light switch kit, free of charge. the safety recall IS expected to begin during october 31, 2011. owners may contact harley-davidson at 1-414-343-4056.
TL* the contact owns a 2011 harley-davidson electra glide classic (flhtc) motorcycle. While driving 40 mph, the contact attempted to apply the brakes; however, the vehicle started smoking and the back tire locked up into a fishtail. The trailing driver stated that the brake lights did not illuminate. The contact was thrown off the motorcycle into the middle of the street. The motorcycle skid onto its side into the sidewalk. The contact was not injured. A police report was not filed. The contact was able to restart the motorcycle and continued driving a short distance to his destination. The vehicle was then towed to the contact's home on a trailer. The dealer and manufacturer had not been contacted. The vehicle was not diagnosed or repaired. The failure mileage was 10,000. *Dt*jb
Nhtsb safety issue ID 18v076000 indicated a brake fluid replacement would be the resolution to the brake problem. I believe this IS incorrect. last year I had the box that controls the ABS fluid pressure replaced. This did not include changing the electrical control board. I have also had the front master cylinder replaced. Each time the fluid was replaced and the work was completed by a harley certified mechanic. unfortunately I continue to have issues with the front brakes either not working and requiring pumping, ABS triggering and not doing anything, and 'squishy' front brake lever. Each of these come and go. After several trips to harley for repair the exact cause IS still unknown. the brakes appear good when the power IS off. As soon as I turn the power on there IS a noticeable release of pressure in the front break lever. This leads me to think the brake problem IS related to the electrical control of the ABS.
TL* the contact owns a 2011 harley davidson flhtc motorcycle. The contact stated that while driving 50 mph the wheel bearings failed. The contact took the vehicle to the dealer for inspection where the wheel bearings were repaired. The manufacturer was notified. The failure mileage was 18,000. The vin was unavailable.
Factory failure. Incorect pour of aluminum mold for engine casting/ engine block, resulting in oil leak. Engine block sweating oil and spreading oil along bottom of frame from front to rear of motorcycle. Engine pourous. *tr
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The Office of Defects Investigation (ODI) opened this investigation in July 2016 based on forty-three (43) Vehicle Owner Questionnaires (VOQ).During the course of this investigation ODI received a total of 145 VOQs related to the alleged defect on the subject motorcycles.Owners allege they experience a sudden and complete loss of brakes on one or both wheels.To better understand the cause of the braking issue on the subject motorcycles, ODI requested NHTSA's Vehicle Research and Test Center (VRTC) conduct inspections and testing of affected vehicle braking systems.Through its work, VRTC determined that deposits were forming on the valves in the Hydraulic Control Unit (HCU) of the Antilock Braking System (ABS). These deposits could prevent the proper function of the HCU and render the brakes ineffective.To understand why deposits were forming in the HCU, Harley Davidson completed an analysis of the Dow 460 brake fluid used as original equipment on the subject motorcycles and determined that it had stability issues if left in the brake system for an extended period of time.Harley Davidson found that if a brake fluid flush was not conducted as outlined in the owner?s manual for the motorcycles, and was left in the system for a period of time beyond their recommendation; deposits could form in the HCU.Through further testing, Harley Davidson identified an alternate, commercially available, brake fluid that did not have the same stability issues as the original fluid and could stop the proliferation of any current brake system deposits.ODI sent Information Request (IR) letters to Harley Davidson and Dow Chemical (the supplier of the brake fluid on the subject motorcycles) to collect information about the subject bikes and the alleged defect.Harley Davidson responded in full on Sept 30, 2016 and Dow responded with a confidential submission on October 25, 2017.ODI analyzed the information contained in both IR responses and concluded that motorcycles manufactured during Model Years (MY) 2008, 2009, 2010, and 2011 were failing at a rate greater than their peers.Based on this analysis and the brake fluid study conducted by Harley Davidson, a group of motorcycles was identified that were potentially affected by the instability of the original brake fluid.2008 marked the introduction of ABS on Harley Davidson motorcycles and a change in the Dow 460 brake fluid used in the 2012 MY vehicles provided the bases for the scope of the affected population.With recall action 18V-076 taken by Harley Davidson this investigation is closed as further use of agency resources does not appear to be warranted.The ODI reports cited above can be reviewed at: https://www.nhtsa.gov/ using the complaint identification numbers attached to this resume.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.