2010 Harley-Davidson FLHTCUSE5
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Harley-Davidson › FLHTCUSE5 › 2010
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2010 Harley-Davidson FLHTCUSE5. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
3 recalls name the 2010 Harley-Davidson FLHTCUSE5. Newest first.
Harley-Davidson Motor Company (Harley-Davidson) is recalling all 2008-2011 Touring, CVO Touring and VSRC motorcycles equipped with anti-lock brakes (ABS), including Road King (FLHR), Road King Police (EFI) (FLHP), Road King Police (EFI) (FLHPE), Electra Glide Standard Police (EFI) (FLHTP), Electra Glide Classic (EFI) (FLHTC), Electra Glide Ultra Classic…
These deposits may cause a valve within the ABS Hydraulic Control Unit to stick, reducing braking ability and increasing the risk of a crash.
Harley-Davidson will notify owners, and dealers will flush the entire brake system with new Platinum Label DOT 4 brake fluid, free of charge. The recall began on February 14, 2018. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson's number for this recall is 0171.
Harley-davidson IS recalling certain model year 2009-2012 touring, cvo touring and trike vehicles manufactured from june 6, 2008, through september 16, 2011. See the above list for the models included in the recall. The rear brake light switch may be exposed to excessive heat from the exhaust system.
The excessive heat may cause the switch to not activate the brake lamp or activate the brake lamp when no brake IS applied and/or cause a brake fluid leak at the brake light switch, affecting rear brake performance. Either condition may increase the risk of a crash.
Harley-davidson will notify owners, and dealers will a install a rear brake light switch kit, free of charge. the safety recall IS expected to begin during october 31, 2011. owners may contact harley-davidson at 1-414-343-4056.
Harley-davidson IS recalling certain model year 2009 and 2010 touring family motorcycles, including cvo touring and trike products, manufactured from june 6, 2008 through november 19, 2009. the front fuel tank mounts may distort in reaction to severe frame damage from a frontal collision. this condition may cause a fuel leak at the weld of the front…
A fuel leak in the presence of an ignition source may result in a fire, which could lead to injury or death to the rider.
Dealers will install a left and right brace, which are intended to reduce front mount distortion during certain crash conditions. this repair will be performed free of charge. the safety recall began on december 11, 2009. owners may contact harley-davidson at 1-414-343-4056.
TL* the contact owns a 2010 harley-davidson ultra classic (flhtcuse5). While driving various speeds, the check engine indicator illuminated and the vehicle went into limp mode. Henderson harley-davidson (1010 w warm springs rd, henderson, NV 89014) was contacted and advised the contact to bring the vehicle to the dealer. The manufacturer was not contacted. The vehicle was not diagnosed or repaired. The failure mileage was 20,250. The vin was unavailable.
Anti lock brakes system (ABS) failed on my motorcycle causing my brakes not to work at all. I had a low speed wreck because of this. Harley davidson IS fully aware of the problem but refuses to take credit for it. this ABS problem stems from the recommended brake fluid can create moisture in the ABS system cause if the ABS to fail. This IS what happened to my motorcycle. I have replaced my brake fluid per the owners manual every 2 years since I've owned the bike. This was sumitted to harley and they still refuse to replace my ABS system due to me not having the previous owners receipts show where he had the service done.
Back brake hard pedal. back tire locked up . ABS module failed
TL* the contact owns a 2010 harley-davidson flhtcuse5. The contact stated that while driving at 5 mph and attempting to come to a complete halt, the front brake lever failed to depress. The contact had to apply the rear brake pedal in order to stop the vehicle. The anti-lock warning light illuminated. The failure recurred on numerous occasions. The vehicle was taken to an independent mechanic who diagnosed that the module for the anti lock brakes needed to be replaced. The vehicle was repaired. The manufacturer was notified of the failure. The failure mileage was 13,000.
TL* the contact owns a 2010 harley davidson motorcycle flhtcuse5. The contact stated that the rear brakes failed. The vehicle was taken to the dealer. The technician diagnosed that the rear brake master cylinder failed and needed to be replaced. The motorcycle was not repaired. The failure mileage was 8,000. ## vin passed ## harley davidson flht cuse5 ##
The rear brakes failed without warning. The ABS braking system would not allow pressure past the ABS module. This failure was caused by an obstruction in the module. *Tr
Rear brake light switch wires caught on fire leading to complete rear brake failure. *Tr
Nhtsa campaign ID number : 09v457000 applies to my HD. No notification or repair done. Motorcycle has numerous areas of pitting and peeling of chrome. Edges of peeling chrome have inflicted cuts. Pitted rough areas could exacerbate injury in the event of collision. *Tr
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The Office of Defects Investigation (ODI) opened this investigation in July 2016 based on forty-three (43) Vehicle Owner Questionnaires (VOQ).During the course of this investigation ODI received a total of 145 VOQs related to the alleged defect on the subject motorcycles.Owners allege they experience a sudden and complete loss of brakes on one or both wheels.To better understand the cause of the braking issue on the subject motorcycles, ODI requested NHTSA's Vehicle Research and Test Center (VRTC) conduct inspections and testing of affected vehicle braking systems.Through its work, VRTC determined that deposits were forming on the valves in the Hydraulic Control Unit (HCU) of the Antilock Braking System (ABS). These deposits could prevent the proper function of the HCU and render the brakes ineffective.To understand why deposits were forming in the HCU, Harley Davidson completed an analysis of the Dow 460 brake fluid used as original equipment on the subject motorcycles and determined that it had stability issues if left in the brake system for an extended period of time.Harley Davidson found that if a brake fluid flush was not conducted as outlined in the owner?s manual for the motorcycles, and was left in the system for a period of time beyond their recommendation; deposits could form in the HCU.Through further testing, Harley Davidson identified an alternate, commercially available, brake fluid that did not have the same stability issues as the original fluid and could stop the proliferation of any current brake system deposits.ODI sent Information Request (IR) letters to Harley Davidson and Dow Chemical (the supplier of the brake fluid on the subject motorcycles) to collect information about the subject bikes and the alleged defect.Harley Davidson responded in full on Sept 30, 2016 and Dow responded with a confidential submission on October 25, 2017.ODI analyzed the information contained in both IR responses and concluded that motorcycles manufactured during Model Years (MY) 2008, 2009, 2010, and 2011 were failing at a rate greater than their peers.Based on this analysis and the brake fluid study conducted by Harley Davidson, a group of motorcycles was identified that were potentially affected by the instability of the original brake fluid.2008 marked the introduction of ABS on Harley Davidson motorcycles and a change in the Dow 460 brake fluid used in the 2012 MY vehicles provided the bases for the scope of the affected population.With recall action 18V-076 taken by Harley Davidson this investigation is closed as further use of agency resources does not appear to be warranted.The ODI reports cited above can be reviewed at: https://www.nhtsa.gov/ using the complaint identification numbers attached to this resume.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.