2000 Harley-Davidson Fxdl
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Harley-Davidson › Fxdl › 2000
These records cover every 2000 Harley-Davidson Fxdl. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
3 complaints
What owners report most
Latest complaints
- Electrical system › Alternator/generator/regulator · Engine and engine cooling › Engine › Gasoline · Fuel system, gasoline › Carburetor system · Fuel system, other › Storage › Fuel gauge system
Extensive oil leak from engine
- Suspension › Rear
I have received a letter from the harley-davidson company of the possible failure of my rear cam bearing. I do not feel safe riding the bike. When the bearing fails does the motor sieze causing the rear tire to lock up?is there any warning beforehand of the bearing failing or IS this a sudden…
I have received a letter from the harley-davidson company of the possible failure of my rear cam bearing. I do not feel safe riding the bike. When the bearing fails does the motor sieze causing the rear tire to lock up?is there any warning beforehand of the bearing failing or IS this a sudden failure issue? Hope I'm not riding the bike ,with my child ,in the passing lane on the interstate at 70 mph when this happens. Could get a little hairy! Why IS there not a recall for this problem?*ak
- Engine and engine cooling › Engine
Consumer received a letter from manufacturer stating the possibility of a rear cam bearing failure, the failure could cause engine to glide to a stop, consumer has been experiencing misses in the engine from 2800 and 3200 rpm and states this could be due to a faulty cam bearing and feels this should be repaired prior to any failure. *slc
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007544SERVICE BULLETIN M1490 (V 24.8.8): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.8.8. Release Date: Week of August 5, 2024. New Features for Harley-Davidson vehicles: Advanced Module Replace for 2021 and later Revolution Max; 2023 and later CVO Touring; and 2024 Street Glide (FLHX), Road Glide (FLTRX). New Features for LiveWire vehicles: Updated calibrations for 2024 S2DM EV1/ EV6; 2024 S2MH EV1; and 2024 S2DM, S2MH. Changes: Added Hand Control Module (HCM) (Part No. 71500522A and 71500536A) for reflash support.
- 11005514GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.
- 11001293SERVICE BULLETIN M1490 (V 24.6.4): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version 24.6.4. Release Date: Week of May 1, 2024. New Features for LiveWire S2DM and S2MH, 2024 Revolution Max, and 2024 Touring.
- 10139399TECH ARTICLE TA0023: TA0023: Crankshaft Rod Bearing. Purpose: Technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the Twin Cam and Milwaukee-Eight crank pin bearings are maintained to a very tight range. This optimizes performance and maintains low mechanical noise in operation. The connecting rod bore can also distort slightly in operation due to stress relaxation. As a result, bearing clearance decreases due to the contact zone broadening and the load being distributed over more rollers. The combination of a bore being slightly out of round and reduced bearing clearance can result in varying degrees of resistance through the range of motion. Axial clearance is also tightly controlled for proper alignment. For these reasons, zones of resistance can be found when the connecting rods are rotated by hand through their range of motion. Resistance during rod motion, by itself, is not an indication of a performance or durability concern.
- 10090280This document will outline inspection and measurement procedures for gerotor style oil pumps. It provides inspection procedures only without specifications.
Every Harley-Davidson Fxdl model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.