1999 Harney Renegade
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Harney › Renegade › 1999
These records cover every 1999 Harney Renegade. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 1999 Harney Renegade. Newest first.
On certain motor homes, the brake assemblies exhibit elevated temperatures that can lead to catastrophic deterioration of the wheel end components such as bearings, races, spindles, knuckles, seals, hubs, rotors, patch bolts, calipers, brake pads, and ABS sensors.
Risk and remedy
Risk
This could result in loss of control, and/or the potential for a fire.
Remedy
Dealers will inspect the front and rear brake calipers for corrosion and replace or rebuild the calipers as necessary. the recall began on august 18, 2004. owners should contact monaco at 1-800-685-6545.
Vehicle description: motor homes equipped with meritor wabco phase 1, d-version antilock brake system (ABS), fail to comply to the requirements of fmvss no. 105, "hydraulic and electric brake systems." an internal diagnostic system in the ABS may not detect an extreme wheel speed sensor air gap. such a condition could possibly occur during (1) original…
Risk and remedy
Risk
This could disable the anti-lock function on the affected wheel without providing the required operator warning that the ABS function requires servicing.
Remedy
The ABS ecu will be removed and replaced on these motor homes. meritor IS conducting the owner notification and remedy scheduling for this campaign. owner notification IS expected to begin during april/may 2001. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact meritor wabco at 1-800-535-5560.
Vehicle description: 1999 and 2000 motor homes manufactured between april 2 and november 20, 1999, and equipped with ABS systems with brake wiring harness part #2505168. the electrical connector which connects to the modulator was mis-wired causing the anti-lock brake modulator to react improperly while regulating hydraulic pressure to the appropriate…
Risk and remedy
Risk
Failure of the anti-lock braking system could cause a loss of control of the vehicle in certain braking situations.
Remedy
Dealers will install a wiring harness update, which properly routes the electrical signal from the ecu to the modulator. 7owner notification IS expected to begin july 13, 2000. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact safari/beaver/harney at 1-800-344-6332.
Owner complaints
1 complaints
Latest complaints
- Service brakes, hydraulic
Rear axle seal was leaking. When repairing the seal, the mechanic saw the brake caliper was hitting the suspension bolt. When the brakes were applied the caliper pushed the rotor and hub out which caused the seal to leak. The axle could fail. A monaco corp. Mechanic said to relocate the caliper to the rear of the rotor. This solved the problem. *Tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Wiring harness incorrectly installed
The ABS brake system was incorrectly wired
Every Harney Renegade model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.