2005 Hino 145
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2005 Hino 145. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
1 complaints
What owners report most
Latest complaints
- Engine · Service brakes, air › Disc
TL* the contact owns 2005 toyota 145. The contact stated that the check engine warning light was illuminated. The vehicle was taken to the dealer where the technician diagnosed that the failure was due to poor lubrication of the turbo charger. As a result, the turbo charger needed to be replaced.…
TL* the contact owns 2005 toyota 145. The contact stated that the check engine warning light was illuminated. The vehicle was taken to the dealer where the technician diagnosed that the failure was due to poor lubrication of the turbo charger. As a result, the turbo charger needed to be replaced. The manufacturer was made aware of the issue. The failure mileage was 13,000 and the current mileage was 14,089. updated 05/28/14*lj the consumer was advised that the disc brakes also needed to be replaced. updated 06/04/2014 *js updated 10/22/14*cn the consumer no longer owns the vehicle. updated 7/22/2015 *js
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11000898This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
- 11000897After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
- 10185585The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for servicing.
- 10184170Hino Quick Reference Guide 2005-2010 Model Years
- 10183803This document is to inform dealers and workshops of the correction to Workshop Manuals for J08 engines listed below.
- 10182669Fuel diluting engine oil
- 10118109TT-15-016 The purpose of this publication is to communicate the standard measuring positions on the Hino chassis. In some cases, the customer may report a visual chassis posture concern where the chassis appears to be leaning more towards the driver side or passenger side. The following publication can be referenced to obtain the manufacture?s measurement positions and specifications. Should the truck not meet the specifications, you should consider the following potential causes noted in the inspection guideline section below.
- 1011810706 - 012 speedometer pulse adapter conversion form
- 1011810607 - 008 dx report ? Exporting, saving and printing from past work information
- 1011810507 - 006 voltage drop test
- 1011810407 - 005 No Throttle Response (brake light switch)
- 1011810307 - 004 ABS Wheel Sensor (active fault 3-1 thru 3-4)
- 10118099SB-13-009 This bulletin is to inform dealers and workshops of proper paint codes for all Hino models. ALL MODELS
- 10117680SB-15-026 A subject vehicle may exhibit an engine oil leak or engine coolant leaking externally from the engine head gasket sealing area on the exhaust manifold side of the engine. An improved head gasket has been made available as a service part and should be used if replacement of the head gasket is necessary. Improvement of the head gasket includes the addition of rubber seals around the engine oil and engine coolant port holes.
- 10117666SB-15-009 This bulletin provides the corrective action for a fluid overflow condition from the main housing breather at startup in cold ambient temperatures at or below +5F (-15C).
- 10117655SB-14-003 The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for servicing.
- 1011757406-011 high pressure fuel pump front seal failure
- 1011757306 - 010 LOW POWER (fuel restriction)
- 1011757106 - 008 ABS EXTENSION HARNESS No throttle response on 2007 air brake chassis with automatic transmissions when selector placed in drive. No cruise control on 2007 air brake chassis with manual transmissions.
- 1011756906-001 running out of fuel, dual tanks not equalizing
- 1011603013-008 Injection Pump Drive Case. Please note the following part number changes to the Injection Pump Bearing Case. Not replacing the correct replacement parts WILL result in major engine damage. The Hino Ordering system has been modified to make the below changes into a kit that consist of the correct parts when ordering the kit ID number. The below information illustrates the kit components per engine and date ranges.
- 10116027PTB 08-08 2005-2008 Quick Reference Guide Correction to Page 60
- 10116025PTB 01-08 Complete Engine Assembly Part Numbers
- 10116024PTB 03-08 Spring Assemblies.
- 10116021TB-04-07 An engineering change in connecting rods was made from a stud with nuts to fasten the cap, to a bolt only to fasten the cap. The connecting rods with the stud and nuts are no longer available. The two different styles are interchangeable however the bearings are not. The bearing ?tang? was relocated as well as a difference in the width.
- 10116020TB-001-07 Hino uses both Davco and Racor fuel/water separators on its vehicles. To determine the correct filter you must know which one is on the vehicle. The Davco is shown on the left. The Racor is shown on the right and has a primer button.
- 10116019Revised Warranty Process ? Denso Fuel Pumps & Injector Nozzles Exchange Denso Fuel Pumps & Injector Nozzles. Effective immediately, fuel pumps and injector nozzles replaced under warranty are to be purchased from the Memphis PDC. It is no longer necessary to order warranty replacement pumps and nozzles from Denso.
- 10116018Introduction of Exchange Turbocharger Program. Hino Trucks is pleased to announce the introduction of the Turbocharger Exchange Program for its 2005 ? 2008 Model Year trucks. Effective June 21, 2007, the following turbocharger part numbers will become new exchange products: 2005 ? 2008 Model Year trucks.