American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.
Risk and remedy
Risk
A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.
Remedy
Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.
When cold clutch does not disengage fully to the point that it IS nearly impossible to put into neutral. Need to shut motorcycle off shift into neutral and let it warm up. After warming up still slams into gear but will go into neutral. Suspect clutch not fully disengaging. Thank you *tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
10100792Service bulletin - honda IS launching a safety recall of 2001-2015 gl1800/a and gl1800b/bd motorcycles. Honda has determined that under conditions where the brake fluid IS not replaced according to the maintenance schedule (every 12,000 miles or two years, whichever comes first), solid deposits may form within the brake fluid, leading to component malfunction within the secondary master cylinder, which may cause the rear brake to drag.
10100782"Honda IS launching a safety recall on model year 2001 through 2015 gl1800/a and gl1800b/bd motorcycles to replace a potentially defective secondary master cylinder. Under conditions where the brake fluid IS not replaced according to the maintenance schedule, deposits may form within the brake fluid, leading to component malfunction within the secondary master cylinder, which may cause the rear brake to drag. A dragging rear brake increases the risk of a crash and may generate enough heat to cause the rear brake to catch fire."
10100549Service bulletin - honda IS launching a safety recall of 2012-2015 gl1800/a and 2013-2015 gl1800/b/bd motorcycles, and IS implementing a recall remedy for 2001-2010 and 2012 GL 1800/a motorcycles already subject to safety recall "JG6". Honda has determined that under conditions where the brake fluid IS subject to prolonged aging due to a lack of maintenance, deposits may form within the brake fluid.
10100546"Dealer message - the service bulletin in support of the safety recall of 2001-2015 gl1800/a and gl1800b/bd motorcycles for a potentially defective secondary master cylinder IS posted on in. Servicebulletin safety recall: gl1800 #23 includes the affected models, repair procedure, parts information, as well as warranty claim information."
10099957Newsletter - the repair procedure for the secondary master cylinder (smc) recall IS very involved, so make sure to read through the entire bulletin before hand so you can visualize the procedures before you start. Not only will you be installing an updated smc and a new rear master cylinder, but it IS important to carefully follow each step in exact order so that the pedal brake line IS completely flushed of any contaminants.
10099874"Dealer message - effective immediately the secondary master cylinder (smc) kits for this recall are available on open order. As indicated in s/b gl1800 #23 and other communications about this recall, it IS absolutely critical that only pro honda dot 4 brake fluid be used during the repair procedure. To help ensure an adequate supply of brake fluid IS available for recall repairs, an additional allocation of pro honda dot 4 brake fluid will be shipped to dealers. The allocation IS based on your dealerships previously submitted gl1800 smc recall warranty claims."
10099681Dealer message - the available stock of the repair kit for 13-14 gl1800b/bd (F6B) has become low. As a result, the availability of p/n 06454-mjg-306 will be controlled by techline until further notice. All other parts for this campaign remain available on open order.
10099488"Dealer message - on december 11, several sections of s/b gl1800 #23 were revised to include information for the repair of trike coversions."
10099350"Service bulletin - honda IS launching a safety recall of 2012-2015 gl1800/a and 2013-2015 gl1800b/bd motorcycles, and IS implementing a recall remedy for 2001-2010 and 2012 gl1800/a motorcycles already subject to safety recall JG6. Honda has determined that under conditions where the brake fluid IS subject to prolonged aging due to a lack of maintenance (i.e., the brake fluid IS not replaced for a long period of time despite the published maintenance schedule of replacement every 12,000 miles or two years, whichever comes first), deposits may form within the brake fluid. If sufficient deposits are formed, they can result in a malfunction of the secondary master cylinder, which may cause the rear brake to drag."
Every Honda GL1800B model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.