2010 Honda VT750C2B

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
• 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
• 10100065Service bulletin - honda IS launching a safety recall of 2010- 2016 model year vt750c/ca/cs, vt750c2/c2f/c2s, and vt750c2b motorcycles for a potentially defective bank angle sensor. Honda has determined that engine vibration may cause the bank angle sensor's wiring to rub on a wire harness connector. Continuous vibration between the bank angle sensor wiring and the wire harness connector may create an open in the bank angle sensor electrical circuit. If an open in the bank angle sensor electrical circuit develops, the engine may stall while riding.
• 10100063"Dealer message - honda IS launching a safety recall of 2010-2016 model year vt750c/ca/cs, vt750c2/c2f/c2s, and vt750c2b motorcycles for a potentially defective bank angle sensor. Honda has determined that engine vibration may cause the bank angle sensors wiring to rub on a wire harness connector. Continuous vibration between the bank angle sensor wiring and the wire harness connector may create an open in the bank angle sensor electrical circuit. If an open in the bank angle sensor electrical circuit develops, the engine may stall while riding. An engine that stalls while riding increases the risk of a crash."

Every Honda VT750C2B model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.