2014 Hyundai Elantra GT

Owner complaints

What owners report most

1. Engine6
2. Electrical system2
3. Engine and engine cooling1
4. Service brakes, hydraulic1

Latest complaints

• Dec 31, 2024TX138,500 mi
  Engine
  The contact owns a 2014 Hyundai Elantra GT. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The RPM decreased significantly, and the check engine warning light illuminated. The vehicle was taken to…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The RPM decreased significantly, and the check engine warning light illuminated. The vehicle was taken to the dealer where it was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact referenced Technical Service Bulletin: 22-01-023H-2; however, the repair was not covered under the program. The failure mileage was 138,500.

• Jun 13, 2024CA117,500 mi
  Engine
  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The vehicle was taken to an independent mechanic where the contact was informed that the engine was…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The vehicle was taken to an independent mechanic where the contact was informed that the engine was clogged with engine oil. The contact was informed that the clogged oil needed to be removed from the engine. The vehicle was repaired. The vehicle was taken to the dealer to be serviced for Manufacturer Service Campaign: 966. The contact stated that the failure reoccurred. The vehicle was taken to an independent mechanic where it was diagnosed with engine failure. In addition, the contact was informed that the oil canister had fractured, and oil had leaked all over the engine. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact was advised that the repair for Manufacturer Service Campaign: 966 was not completed on the vehicle. In addition, the contact was informed that the repair was not eligible to be covered under warranty or recall. The failure mileage was approximately 117,500.

• May 9, 2024FL
  Electrical system · Service brakes, hydraulic
  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving at an undisclosed speed, the ABS warning light illuminated, causing the brake pedal stopper to fail. The contact referenced NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic). The contact also stated that…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving at an undisclosed speed, the ABS warning light illuminated, causing the brake pedal stopper to fail. The contact referenced NHTSA Campaign Number: 23V651000 (Service Brakes, Hydraulic). The contact also stated that the battery warning light was illuminated. The vehicle was taken to an independent mechanic and was diagnosed with electrical failure. The battery was replaced; however, the failure persisted. The contact referenced NHTSA Campaign Number: 17V769000 (Service Brakes, Hydraulic) as a possible remedy. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline. The vehicle was not repaired. The failure mileage was unknown.

• Dec 12, 2022PA113,000 mi
  Engine
  The contact owns a 2014 Hyundai Elantra GT. The contact stated while driving at unknown speeds, the vehicle inadvertently decelerated and failed to accelerate while depressing the accelerator pedal. During the failure, the check engine warning light illuminated. The vehicle was taken to the local…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated while driving at unknown speeds, the vehicle inadvertently decelerated and failed to accelerate while depressing the accelerator pedal. During the failure, the check engine warning light illuminated. The vehicle was taken to the local dealer who updated the engine software on several occasions however, the failure persisted. The manufacturer was not yet contacted. The failure mileage was 113,000.

• Mar 14, 2022IL105,000 mi
  Engine and engine cooling › Engine › Oil/lubrication
  The contact owns a 2014 Hyundai Elantra GT. The contact stated while driving approximately 35-40 MPH, the low oil warning light illuminated and the vehicle stalled. The contact was unable to veer to the side of the roadway. The contact was able to restart the vehicle; however, the failure…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated while driving approximately 35-40 MPH, the low oil warning light illuminated and the vehicle stalled. The contact was unable to veer to the side of the roadway. The contact was able to restart the vehicle; however, the failure reoccurred while driving in a parking garage. The dealer was notified of the failure and informed the contact that they would be able diagnose the vehicle in several weeks. The vehicle was taken to an independent mechanic who replaced the engine oil and the low oil warning light turned went away. The contact stated that the failure reoccurred a month later. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 105,000.

• Dec 1, 2021FL119,000 mi
  Electrical system · Engine
  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving at an undisclosed speed, the vehicle made an abnormal sound and then lost motive power. The oil and battery warning lights were illuminated. The contact was able to restart the vehicle after three hours. The vehicle…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving at an undisclosed speed, the vehicle made an abnormal sound and then lost motive power. The oil and battery warning lights were illuminated. The contact was able to restart the vehicle after three hours. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 119,000.

• Nov 1, 2021CT96,000 mi
  Engine
  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving up at hill at 10 MPH, the contact heard an abnormal, knocking noise emit from the engine without warning. Once the contact reached the top of the hill, the vehicle shutoff without warning. Due to the failure, she had…

  The contact owns a 2014 Hyundai Elantra GT. The contact stated that while driving up at hill at 10 MPH, the contact heard an abnormal, knocking noise emit from the engine without warning. Once the contact reached the top of the hill, the vehicle shutoff without warning. Due to the failure, she had the vehicle towed to an independent mechanic who informed her that the engine had seized and that the engine needed to be replaced. The contact then called two dealers who offered no assistance. The contact then called the manufacturer who informed her that there was a recall on the vehicle and to take the vehicle back to a local dealer for assistance. The VIN tool showed that there were zero recalls on the vehicle. The vehicle had yet to be repaired. The failure mileage was 96,000.

• Oct 6, 2021PA104,000 mi
  Engine
  The contact owns a 2014 Hyundai Elantra. The contact stated while driving down a hill at 10 MPH, various warning lights illuminated as the vehicle lost all power. The contact stated that the brakes and steering failed as the vehicle rolled down a hill and stopped at the bottom of the hill. The…

  The contact owns a 2014 Hyundai Elantra. The contact stated while driving down a hill at 10 MPH, various warning lights illuminated as the vehicle lost all power. The contact stated that the brakes and steering failed as the vehicle rolled down a hill and stopped at the bottom of the hill. The contact stated that she was able to restart the vehicle after 10 minutes, resuming normal operation. The vehicle was taken to an independent mechanic who was unable to diagnose a failure. The contact then took the vehicle to another independent mechanic who performed diagnostic testing and no failure codes were detected. The contact then continued to drive the vehicle however, 3 weeks later the failure reoccurred. The vehicle was then taken back to two independent mechanics where no failure was determined again. The contact stated that the failure occurred a third time while driving up a hill with the vehicle losing power. This time the vehicle was unable to restart without a jump start. The vehicle was taken to the dealer where the contact informed them of excessive oil consumption and the loss of power failure. The dealer informed her that an engine diagnostic was not performed as no warning lights were illuminated. The contact stated that the dealer performed an engine combustion cleaning. The manufacturer was notified of the failure and informed the contact that the VIN was not included in any recalls. No further assistance was offered. The approximate failure mileage was 104,000. The consumer stated she spent almost $1,000 to rectify the oil burning issue with the dealer, but doesn't know whether the problems has been resolved.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11006829Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
• 11000788A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
• 11000314A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
• 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
• 10251282Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. Campaign 9A8 has also been released to provide a revised software update to certain 2018 model year Elantra vehicles. For certain vehicles that cannot be upgraded with the software under Campaign 993, Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealerships.
• 10251276This bulletin provides the service procedure to: 1) Upgrade the IBU/BCM (Integrated Body Control Unit/Body Control Module) to revise the OEM Hyundai burglar alarm system operation and ignition start logic and 2) Install two anti-theft decals for the front windows. Additional decals may also be installed in the rear windows at customers discretion.
• 10251275Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealers.
• 10249742In certain areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to exterior surfaces of specified underbody components. This service campaign describes the procedure to perform this preventative service on certain Elantra GT (GD) vehicles.
• 10249741In some areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to the bottom exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain Elantra GT (GD) vehicles.
• 10249718In certain areas, a vehicles underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to exterior surfaces of specified underbody components. This service campaign describes the procedure to perform this preventative service on certain Elantra GT (GD) vehicles.
• 10249707Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10247611Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
• 10245579Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10245578Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10244992Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10241874Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10241849Some models from service campaign 993 (IBU/BCM Software Update and Decals Application) equipped with the Hyundai OEM remote start system may exhibit the horn honking when remote starting the vehicle after receiving the software update. This bulletin provides the procedure to update the remote start module to eliminate the horn honking during remote start operation.
• 10240082A class action lawsuit against Hyundai Motor America (HMA) alleges that certain Hyundai vehicles (Class Vehicles) were manufactured, marketed, sold, and/or leased with an engine defect that can result in sudden engine seizure, stalling, engine failure, and in some circumstances, engine fire, and that some owners and lessees of Class Vehicles have been improperly denied repairs under warranty. Neither HMA nor Hyundai Motor Company have been found liable for any of the claims alleged in the lawsuit. The parties have instead reached a voluntary settlement (the Settlement) to avoid lengthy litigation and to provide owners of Class Vehicles certain benefits.
• 10240081Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32).
• 10240080Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10238353Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10237189Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10235556Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10235555Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
• 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
• 10227320Certain vehicles may experience the Check Engine warning lamp illuminated with DTC P1326 and/or engine may exhibit abnormal noise, or no crank/no start condition related to connecting rod bearing wear or damage. This Dealer Best Practice outlines the service process to inspect the vehicle and replace the engine or update the engine ECU software based on the inspection results, as well as related warranty coverage for the conditions outlined above.
• 10227317Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10227316The warranty coverage for engine repair or replacement regarding engine damage or malfunction from connecting rod bearing wear has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners. Commercial entities and individuals engaged in the buying, selling, leasing, or renting of motor vehicles, as well as salvaged vehicles, are ineligible for the extended warranty.
• 10227313Op code/part number (reference guide for service campaign T6G)
• 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
• 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
• 10211675The Powertrain warranty coverage for certain engine repairs and/or replacement where the engine damage or malfunction is related to connecting rod bearing wear, has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
• 10211667Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
• 10211666Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10211664Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
• 10211662Certain vehicles that have completed Service Campaign 966 may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10210206Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10210205Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.

Every Hyundai Elantra GT model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.